Panasonic Hc X1000 Owners Manual

							- 111 -
∫
Use this unit as a wireless LAN device
When using equipment or computer systems that require more reli able security than wireless LAN 
devices, ensure that the appropriate measures are taken for saf ety designs and defects for the 
systems used. Panasonic will not take any responsibility for an y damage that arises when using this 
unit for any purpose other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this unit is presumed to be in cou ntries 
where this unit is sold
There is the risk that this unit violates the radiowave regulations if used in countries other than those 
where this unit is sold, and Panasonic takes no responsibility  for any violations.
∫There is the risk that data sent and received via radio waves m ay be 
intercepted
Please note that there is the risk that data sent and received  via radio waves may be intercepted by 
a third party.
∫ Do not use this unit in areas with magnetic fields, static elec tricity or 
interference
≥ Do not use this unit in areas with magnetic fields, static elec tricity or interference, such as near 
microwave ovens. Radio waves may not reach this unit.
≥ Using this unit near devices such as cordless telephones or any  other wireless LAN device that 
use the 2.4 GHz radio wave band may cause a decrease in performa nce in both devices.
∫Do not connect to the wireless network you are not authorized t o 
use
When this unit utilizes its Wi-Fi function, wireless networks w ill be searched automatically. When 
this happens, wireless networks that you are not authorized to  use (SSID*) may be displayed, 
however do not attempt to connect to the network as it may be c onsidered as unauthorized access.
* SSID refers to the name of device that is used to identify a n etwork over a wireless LAN 
connection. If the SSID matches for both devices, transmission  is possible.
∫Before use
To use a Wi-Fi function with this unit, you need a wireless access point or destination device 
equipped with a wireless LAN function.
≥For the operations and settings of your device such as the smar tphone, please read the 
operating instructions of the device.
∫ This unit is NFC-compatible
Using the NFC (Near Field Communication) function, you can easi ly transfer data necessary for a 
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with A ndroid
™ (OS version 2.3.3 or 
later). (Except for some models)
Wi-Fi
Wi-Fi® function 
						

							- 112 -
∫
This unit is WPS-compatible
WPS (Wi-Fi Protected Setup™) is a function that allows you to easily set up a connection w ith a 
wireless LAN device and make security-related settings.
≥ This unit cannot be used to connect to a public wireless LAN co nnection.
≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device  when using a wireless 
access point.
≥ This unit uses the 2.4 GHz frequency band. You cannot establish  a wireless LAN connection 
using the 5 GHz frequency band.
≥ When using a wireless access point, we strongly recommend that you set a encryption to 
maintain information security.
≥ This unit may not connect to a wireless access point depending  on the radio wave condition.
≥ When using the Wi-Fi function, d o not cover the Wi-Fi transmitter with your hand. (l6)
≥ When the battery indicator is flashing red, the connection with  other equipment may not start or 
the connection may be disrupted.
≥ The Wi-Fi transmitter may become warm when using the Wi-Fi func tion; however this is not a sign 
of a malfunction. ( l6) 
						

							- 113 -
Using a smartphone, you can perform record operations from a remote location.
A When connecting directly to a smartphone
B When connecting to a wireless access point
≥ Refer to [Help] in the “Image App” menu about function of Image  App.
∫Remote operation range
The distances in which you can operate this unit remotely from a smartphone with a direct Wi-Fi 
connection are as follows:
jIndoors: within approximately 10 m
j Outdoors: within approximately 6 m
≥ Depending on your smartphone and the radio wave conditions, you may not be able to operate 
this unit remotely.
Preparations before using remote operation
1 Install the smartphone application “Image App” on your smartpho ne. (l11 9 )
2 Check if the smartphone is an Android (NFC-compatible), Android  (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the 
device will be displayed when starting up the “Image App”.
3 Register [Wi-Fi] to a USER button. ( l61)≥Please refer to page  61 for details about setting the USER button.
Wi-Fi
Remote operation
≥You need to turn on the Wi-Fi function of your smartphone.
Caution:
Be sure to pay special attention to the privacy, the likeness r ights, etc. of the subject when you use 
this function. Use at your own risk.
Image App
Image App 
						

							- 114 -
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
∫If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the  smartphone.≥Proceed to “Using remote operation with a direct connection”. ( l11 5 )
∫If the device is Android (n on-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connect ion.≥Connecting with WPS ( l125 )
≥ Connecting with QR code ( l126 )
≥ Connecting by entering an SSID and Password ( l126)
When the Wi-Fi connection is complete, proceed to “Using remote  operation with a direct 
connection”. ( l11 5 )
1 Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥Connecting with WPS ( l122 )
≥ Searching for wireless access points to set up a connection ( l123)
≥ Setting up a connection manually ( l124 )
When the Wi-Fi connection is complete, proceed to “Using remote  operation with a wireless access 
point connection”. ( l11 6 )
≥Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connectio n in conjunction with the 
smartphone application “Image App”. ( l120 )
Setting up a direct Wi-Fi connection between this unit and a 
smartphone
Setting up a Wi-Fi connection via a wireless access point 
						

							- 115 -
Using remote operation with a direct connection
≥Set the NFC function of the smartphone to ON.
1Start up the smartphone application “Image App”.
2Touch the smartphone on   of this unit.≥Touch the NFC mark while a m essage asking you to touch the 
NFC mark on the device is displayed on the smartphone 
screen.
≥ If this is the first time the sma rtphone is connecting to this unit, 
touch [YES] on the screen of this unit, and then touch the 
smartphone on   of this unit again.
≥ If the unit is not recognized even when touching the 
smartphone, change positions and try again.
≥ The connection cannot be established while this unit is recordi ng or in Playback Mode.
≥ When the connection is complete, the image of this unit will be  displayed on the smartphone 
screen.
If you touch the second smartphone when this unit has already been connected 
to the first one
The remote operation with the first smartphone that has been co nnected to this unit will be cut off, 
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recordi ng or in Playback Mode.
Proceed to Step 2 when your Wi-Fi connection has been made via  [Direct Connection] in [Wi-Fi 
Setup] ( l125 ).
1Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
≥  is displayed
2Select the following menu items to set up a Wi-Fi connection be tween this 
unit and a smartphone.
≥ When the connection is complete,   will be displayed on the scre en of this unit.
3Start up the smartphone application “Image App”.≥The image of this unit will be displayed on the smartphone scre en.
To exit remote operation:
Touch [EXIT] on the screen of this unit or press the USER butto n to which [Wi-Fi] 
is registered.
≥ The message is displayed. Touch [YES] to close the indication.
If the device is Android (NFC-compatible)
If the device is Android (non-NFC-compatible) or iOS
: [Wi-Fi Setup]  # [Direct Connection]MENU 
						

							- 116 -
≥If you touch an NFC-compatible smartphone to this unit, you can  register up to five smartphones. 
When the number exceeds five, registrations will be deleted, st arting from the oldest touched one.
≥ Please refer the instructions for the device you are using for  information on how to set up and use 
a NFC-compatible smartphone.
Using remote operation with a wireless access point 
connection
≥ Set the NFC function of the smartphone to ON.
1Connect the smartphone to a wireless access point.≥When you connect using NFC for  the first time, please make connection of this unit and a 
wireless access point. ( l122 )
2Start up the smartphone application “Image App”.
3Touch the smartphone on   of this unit.≥Touch the NFC mark while a message asking you to touch the 
NFC mark on the device is displayed on the smartphone 
screen.
≥ If this is the first time the smartphone is connecting to this unit, 
touch [YES] on the screen of this unit, and then touch the 
smartphone on   of this unit again.
≥ If the unit is not recognized even when touching the 
smartphone, change positions and try again.
≥ The connection cannot be established while this unit is recordi ng or in Playback Mode.
≥ When the connection is complete, images stored on this unit are  displayed on the smartphone 
screen.
If you touch the second smartphone when this unit has already been connected 
to the first one
The remote operation with the first smartphone that has been co nnected to this unit will be cut off, 
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recordi ng or in Playback Mode.
If the device is Android (NFC-compatible) 
						

							- 117 -
Proceed to Step 6 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi 
Setup] ( l125 ).
1Connect the smartphone to a wireless access point.
2Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
≥ will be displayed.
3Select the following menu items to set up a Wi-Fi connection be tween this 
unit and a wireless access point.
≥ Touch [OK].
4Touch the wireless access point to connect.
5Touch [ENTER].≥  will be displayed when the connection between this unit 
and the wireless access point is complete.
≥ To change the wireless access point to connect to, touch 
[Change AP], and add a wireless access point or perform 
operations in Steps 4 s5. ( l129 )
6Start up the smartphone application “Image 
App”.
≥When the connection between this unit and the smartphone 
is complete, images stored on this unit are displayed on the 
smartphone screen.
To exit remote operation:
Touch [EXIT] on the screen of this unit or press the USER butto n to which [Wi-Fi] 
is registered.
≥ The message is displayed. Touch [YES] to close the indication.
≥If you touch an NFC-compatible smartphone to this unit, you can  register up to five smartphones. 
When the number exceeds five, registrations will be deleted, st arting from the oldest touched one.
≥ Please refer the instructions for the device you are using for  information on how to set up and use 
a NFC-compatible smartphone.
If the device is Android (non-NFC-compatible) or iOS
: [Wi-Fi Setup]  # [Wireless Settings]MENU


A [Wireless Settings]
B [RETURN]
C [Delete]
D [ENTER] 
						

							- 118 -
About remote operation
Smartphone screen shots are example displayed in Motion Picture Recording Mode.
* Focus Assist provides only the expand function during remote operation.
≥ The displayed content differs depending on Recording Mode (Inte lligent Auto Mode/Manual 
Mode) and other settings.
≥ Depending on your OS or the version of the smartphone applicati on “Image App”, the screens 
may differ from the ones above.
∫ In Recording Mode
≥Recording motion pictures
≥ Selecting a media to record
≥ Using the zoom (Available in the medium or 
fast speed)
≥ Recording format
≥ Two slot function
≥ Focus adjustments
≥ White Balance setting
≥ Iris adjustments
≥ Gain adjustments
≥ Shutter speed adjustments ≥
i.Zoom
≥ Hybrid Optical Image Stabilizer
≥ Slow shutter
≥ Digital Zoom
≥ AGC limit
≥ Super Gain
≥ Backlight Compensation
≥ Recording with infrared light
≥ Focus assist
≥ Turning off this unit
≥Even if you operate the following switches during remote operat ion, changes will not be applied to 
this unit. Operate the switches before remote operation.
j iA/MANU switch
j FOCUS A/M/ ¶ switch
j ND FILTER switch
Screen display during remote operations
Recording screen
1Zoom
2 Remaining battery power of this unit
3 Focus assist*
4 Infinity focus
5 Push auto focus
6 Menu display
7 Recording start/stop button
8 Focus adjustments
9 Recording Mode button
:  Iris/Shutter speed adjustments
; White Balance setting
< Gain adjustments
= Name of the connected device
Functions available for remote operations
TFAGAIN¿WBIRIS/
SHTRPUSH AF
WFAR NEAR
XXXXXXXXX
150M
60P


\f




\b 
						

							- 119 -
* The supported OS versions are current as of September 2014 and subject to change.
≥ Use the latest version.
≥ Refer to [Help] in the “Image App” menu about function of Image  App.
≥ The service may not be able to be used properly depending on th e type of smartphone being 
used. For information on the “Image App”, check the support website below.
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only.)
≥ When downloading the app on a mobile network, high packet commu nication fees may be 
incurred depending on the details of your contract.
Wi-Fi
Install the “Image App”
About the “Image App”
The “Image App” is an application provided by Panasonic.
For Android appsFor iOS apps
OS Android 2.3.3 or later*iOS 6.0 or later*
(iPhone 3GS is not supported.)
Installation 
procedure1Connect your Android 
device to a network.
2 Select “Google Play™ 
Store”.
3 Enter “Panasonic Image 
App” into the search 
box.
4 Select “Panasonic 
Image App” and install 
it.
≥The icon will be added 
to the menu.
1 Connect your iOS 
device to a network.
2 Select “App Store
SM”.
3 Enter “Panasonic Image 
App” into the search 
box.
4 Select “Panasonic 
Image App” and install 
it.
≥The icon will be added 
to the menu. 
						

							- 120 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
∫About the connection status icon when connected to Wi-Fi
Using the Network Easy Set up to set up a connection
With the smartphone application “Image App”, you can transfer t he following information between 
the smartphone and this unit by using the NFC or QR code functi on.
≥ Install the smartphone application “Image App” on your smartpho ne.
≥ Register [Wi-Fi] to a USER button. ( l61)
≥ Set the NFC function of the smartphone to ON.
1Press the USER button to which [Wi-Fi] is registered, and turn  on the Wi-Fi 
function.
2Select the menu.
≥ Touch [YES].
3Start up the smartphone application “Image App”.
4Touch the smartphone on   of this unit.≥Touch the NFC mark while a message asking you to touch the NFC  mark on the device is 
displayed on the smartphone screen.
≥ If this is the first time the sm artphone is connecting to this  unit, touch [YES] on the screen of this 
unit, and then touch the smartphone on   of this unit again.
≥ When the connection is complete, the setup screen is displayed  on the smartphone.
Wi-Fi
Setting Up a Wi-Fi Connection
AThe connection status iconWhen connected to wireless access point:
 connected to Wi-Fi/  not connected to Wi-Fi
≥ The display will change as follows according to the 
radio wave intensity:   (Weak)  #  #  # 
 (Strong).
When directly connected:  connected to Wi-Fi/  not connected to Wi-Fi
With Network Easy Setup, you can set the following information:
≥ Clock information (synchronizing the clock information with that of the smartphone)
≥ Information on wireless access points (SSIDs and Passwords)
If the device is Android (NFC-compatible)
: [Wi-Fi Setup]  # [Wi-Fi Easy Setup]

MENU