Panasonic HC V770 Owners Manual

- 181 -
9(When selecting [WEP]/[TKIP]/[AES])Touch [INPUT], then enter the Password.≥For details on how to enter characters, refer to page  104.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete. Touch [ ENTER], and exit [Wireless 
Settings].
≥ Check the wireless access points instruction manual and setting s when a saving wireless access 
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descendin g order of strength. We 
recommend you...

- 182 -
1Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 
2Touch [Direct Connection].
3Touch [Change connection type].
4Touch [WPS Connection].
5Set the smartphone to WPS Mode.
1Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 
2Touch [Direct Connection].
3Touch [Change connection type].
4Touch [QR code].≥QR code is displayed on the screen of this unit.
5Start up the smartphone application “Image App”.
6On the smartphone, select [QR code], and scan the QR code displ ayed on the 
screen...

- 183 -
1Press Wi-Fi button and touch [Wi-Fi Setup]. 
2Touch [Direct Connection].
3Select the SSID displayed on this unit from the Wi-Fi setup menu.
4Enter the Password displayed on this unit’s screen on the smart phone.
≥Transmission speed may decrease, or may not be usable depending  on the environment it is 
used in.
Connecting from the history
Each use of a Wi-Fi function is stored in the Wi-Fi connection  history. Connecting from the history 
allows you to easily set up a connection using the...

- 184 -
If the Wi-Fi connection cannot be established
≥Please refer to the operating instruction of the device in use  for details about the setting of the 
wireless access point or smartphone.
ProblemCheck points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete t he connection, the Wi-Fi 
connection will be aborted.
Reset the...

- 185 -
The Wi-Fi connection is 
not possible between this 
unit and a smartphone.(Wireless Access Point Connection)
≥Make sure the smartphone is properly connected to the 
wireless access point by checking the Wi-Fi settings of the 
smartphone.
≥ Make sure this unit and the smartphone are connected to the 
same wireless access point.
≥ Make sure the wireless access point is registered in this unit.  
( l 186 )
(Direct Connection)
≥ Make sure the smartphone is properly connected to this unit 
by checking...

- 186 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 
2Touch desired menu item.
You can add or delete wireless access points, or rearrange the display order of wireless access 
points.
≥ Up to 3 wireless access points can be set.
≥ Please refer to page  178 for details about [Wireless Settings].
To add a wireless access point
1Touch the part where no wireless access points...

- 187 -
This setting controls whether or not a password is required when you directly connect this unit and a 
smartphone to start remote operations or to use the Wireless Tw in Camera function.
≥ If you select [OFF], you can directly connect this unit and a s martphone without entering the 
password for this unit’s SSID into the smartphone.
≥ If you select [OFF], you cannot set up a connection with [WPS C onnection] or [QR code].
If your device is Android (non-N FC-compatible)/iOS, set up a co nnection...

- 188 -
This will set/clear the Password to limit the startup of the Wi-Fi setting menu.
By setting the Password, it will prevent erroneous operation, p revent wrongful use of the Wi-Fi 
function by third party, and protect the set personal informati on.
1Touch [Setup].
2 Touch [INPUT], and enter the Password (6 characters).
≥After finish entering the Password, touch [Enter].
≥ If the Password has already been set,   is displayed.
≥ For details on how to enter characters, refer to page  104.
3Touch...

- 189 -
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet 
Mask] and [MAC Address].
≥ If you touch [AUTO], the network settings are configured automa tically. If you touch [MANUAL], 
you can set each item. Select the item you want to set, and set  it.
≥ [MAC Address] cannot be changed.
You can test the connection between this unit and the wireless  access point. The following 
connections can be verified: jConnection to the wireless access point
j Connection...

- 190 -
Acquire a “LUMIX CLUB” Login ID (free).
You can upload the scenes and still pictures recorded with this unit to WEB service with [Link to 
Cell] or use the [Live Cast] function if you register to “LUMIX  CLUB”.
≥ You can set the same “LUMIX CLUB” Login ID for this unit and a  smartphone.
When Login ID is acquired over the smartphone (“Image App”) onl y, it is possible to register the 
same Login ID to this unit using the “Image App”. (l 191)
When different Login IDs are acq uired for this unit...