Panasonic HC V770 Owners Manual

- 141 -
∫
Using Eye-Fi direct mode
The files can be transferred directly from the Eye-Fi card to a smartphone without going through the 
wireless access point when necessary setting is performed in a  PC in advance.
≥Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-
Fi direct mode settings.
≥ Insert an Eye-Fi card (commercially available) to the unit.Select the menu.
≥This mode is displayed only when [Eye-Fi TRANSFER] is set to [O N].
≥ The mode will be canceled using...

- 142 -
≥The Eye-Fi menu only appears when an Eye-Fi card is used.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to  operate in the future due to 
changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using  the software supplied with the Eye-
Fi card before use.
≥ When the endless memory function of the Eye-Fi card is set to o n, the files transferred from the 
card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the...

- 143 -
∫
Use this unit as a wireless LAN device
When using equipment or computer systems that require more reli able security than wireless LAN 
devices, ensure that the appropriate measures are taken for saf ety designs and defects for the 
systems used. Panasonic will not take any responsibility for an y damage that arises when using this 
unit for any purpose other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this unit is presumed to be in cou ntries 
where this unit is sold
There is...

- 144 -
∫
This unit is WPS-compatible
WPS (Wi-Fi Protected Setup™) is a function that allows you to e asily set up a connection with a 
wireless LAN device and make security-related settings.
≥ This unit cannot be used to connect to a public wireless LAN co nnection.
≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device  when using a wireless 
access point.
≥ This unit uses the 2.4 GHz frequency band. You cannot establish  a wireless LAN connection 
using the 5 GHz frequency band.
≥ When...

- 145 -
Using a smartphone, you can perform record/playback operations from a remote location or upload 
motion pictures and still pictures recorded in this unit on SNS  (Social Networking Service).
A When connecting directly to a smartphone
B When connecting to a wireless access point
≥ Refer to [Help] in the “Image App” menu about how to operate.
Preparations before using [Link to Cell]
1 Install the smartphone application “Image App” on your smartpho ne. (l174)
2 Check if the smartphone is an Android...

- 146 -
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
∫If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the  smartphone.≥Proceed to “Using [Link to Cell] with a direct connection”. ( l147)
∫ If the device is Android (n on-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connect ion.
Check the [Direct Connection Password] setting in [Wi-Fi Setup] . (
l187)≥The default setting for...

- 147 -
Using [Link to Cell] with a direct connection
∫If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to ON.
1Start up the smartphone application “Image App”.
2Touch the smartphone on   of this unit.≥Touch the NFC touch area while the NFC mark is displayed on 
the smartphone screen.
≥ If this is the first time the sm artphone is connecting to this  unit, 
touch [YES] on the screen of this unit, and then touch the 
smartphone on   of this unit again.
≥ If the unit is not...

- 148 -
≥The following operations allow you to register up to ten smartp hones. If the number exceeds ten, 
smartphone information with the oldest registration date and ti me will be deleted.
j Touching an NFC-compatible smartphone on this unit.
j Setting [Direct Connection Password] to [OFF] and connecting th is unit and a smartphone 
directly.
≥ Please refer the instructions for the device you are using for  information on how to set up and use 
a NFC-compatible smartphone.
Using [Link to Cell] with a...

- 149 -
∫
If the device is Android (n on-NFC-compatible) or iOS
1Connect the smartphone to a wireless access point.
2Press Wi-Fi button on this unit and touch [Link to Cell]. ≥It will go into connection standby for remote operation.
3Start up the smartphone application “Image App”.≥When the connection is complete , images of this unit is displayed on the smartphone screen.
To exit [Link to Cell]:
Touch [EXIT] or press Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication.
≥After...

- 150 -
≥Depending on your OS or the version of the smartphone applicati on “Image App”, the screens 
may differ from the ones above.
∫ In Recording Mode
≥Recording motion pictures/still pictures
≥ Selecting a mode
≥ Using the zoom (Available in the medium or fast speed)
≥ Switching between the Recording Mode:
jIntelligent Auto Mode
j Manual Mode
j FULL HD Slow Motion Video Mode ([Always])
j 4K Photo Mode
*1, 2
jStop Motion Animation Assist Mode
≥ Twin Camera*1
≥Changing and adjusting the Sub Window...