Panasonic HC V770 Owners Manual

- 161 -
≥Setting cannot be performed while operating monitoring with a s martphone.Touch [Setup] and select desired setting.
∫[Home Monitor Connect]
You can display the registration screen for a Device ID and Pas sword.
≥ If [QR code] is touched, a QR code will be displayed on the scr een of this unit.
∫[Remote Voice Level]
You can set the initial remote voice level and speaker volume l evel of the remote voice function.
≥The mode cannot be switched to another one during home monitori ng operations.
≥...

- 162 -
Connecting this unit to a DLNA-compatible device via Wi-Fi, you can playback scenes and still 
pictures on the DLNA device.
A DLNA-compatible Device
Preparations before using [DLNA Play]
1Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Check if the Device is DLNA-compatible.
3 Set up a Wi-Fi connection between this unit and the wireless ac cess point.
≥[WPS Connection] ( l178 )
≥ Searching for wireless access points to set up a connection ( l179)
≥ Setting up a...

- 163 -
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥ The following scenes can be played back:
jScenes recorded in AVCHD
j Scenes recorded as Backup for Twin Camera
j Scenes recorded in MP4/iFrame [720]
j Scenes saved in MP4 (1280 k720/30p) or MP4 (640 k360/30p)
1Press Wi-Fi button on this unit and touch [DLNA Play]. ≥ If you touch [Change AP], you can switch the wireless access po int to another one that has been 
registered to this...

- 164 -
By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still 
pictures recorded with this unit to the PC.
A PC
Preparations before using [Copy]
1Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Check if the PC and the wireless access point are connected via  Wi-Fi.
≥You can also use a LAN cable to connect the PC and the wireless  access point.3Set up a Wi-Fi connection between this unit and the wireless ac cess point.≥[WPS Connection] (...

- 165 -
To copy scenes and still pictures by setting up a Wi-Fi connection between this unit and the PC, 
complete the following preparations: jTurn on the PC
j Create a shared folder (destination folder)
*1
*1 The name of the folder must consist of 15 or less alphanumeri c characters.
∫When using HD Writer AE 5.2
1 Install HD Writer AE 5.2.≥For information on the operating environment and installation,  refer to “Operating environment” 
( l 208 ) and “Installation” (l 211).
2 Using HD Writer AE 5.2,...

- 166 -
Copying to a PC
≥Create a shared folder (destination folder) on the PC. ( l165 )
1Press Wi-Fi button on this unit and touch [Copy]. 
2Touch the PC to be connected.≥To search for PCs again, touch [Refresh].
(When the PC you want to connect to is not displayed)
Touch [Manual Setting].
3(When [Manual Setting] is touched)Enter the computer name of the PC (NetBIOS name for Mac compute rs).≥Enter the computer name of your PC (NetBIOS name for Mac comput ers).
(A maximum of 15 characters can be...

- 167 -
≥Copying can be performed even when the battery is used for powe r, but we recommend that the 
AC adaptor be used.
≥ Once scenes or still pictures are copied to a PC, the original  scenes or still pictures cannot be 
copied to any PCs.
≥ If the total length of the scenes recorded on the same date on  the SD card exceeds 
approximately 8 hours, the scenes will not be copied.
≥ If the copy source contains scenes or still pictures recorded o n other devices, copying may be 
canceled.
≥ Depending on...

- 168 -
You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” 
and USTREAM.
A You can also broadcast motion pictures live by connecting this  unit and a smartphone that 
supports tethering.
Wi-Fi
[Live Cast]
≥ If [CLOCK SET] (l21) is not set correctly, [Live Cast] cannot be used.≥ Check your contract details carefully, as smartphone and intern et contract details may 
result in high communication charges being incurred, or a limit  placed on 
communication...

- 169 -
Preparations before using [Live Cast]
1(When connecting to a wireless access point)Check if the wireless access point is compatible with IEEE802.11b/g/n.
(For tethering connection)
Check if your smartphone is compatible with the tethering funct ion.≥For information on how to set up the tethering function, refer  to the operating instructions for your 
smartphone.
2 Acquire a USTREAM ID/Password/APP.≥Acquire a USTREAM ID/Password/APP using a smartphone or a PC.
≥ Operation cannot be guaranteed on...

- 170 -
Broadcasting live
Press Wi-Fi button on this unit and touch [Live Cast]. ≥If a “LUMIX CLUB” Login ID and Password has not been registered  to this unit yet, enter them 
according to the screen.
≥ You can register up to three wireless access points. When conne cting to a wireless access point, 
this unit will try to connect to wireless access points one aft er the other. For example, if it fails to 
connect to the first one, it will try to connect to the second  one. (l186)
≥ If you touch [Change...