Panasonic Hc V700 Owners Manual

51VQT3Y41
This is a recording mode that can record in 1080/60p (1920k1080/60 progressive), which is 
the highest picture quality for this unit.
It is also possible to set from the menu.
≥ Please refer to page 156 for details about approximate recordable time.
Advanced (Recording)
1080/60p recording
: [RECORD SETUP]  # [REC MODE] # [1080/60p]
0Ò0Ñ0Ù0Ñ0Ð0×0Ñ1
1080/60p button
To set to 1080/60p recording mode, press and 
hold the button until   is displayed.
≥
To return to normal recording mode, press and...

52VQT3Y41
You can record using convenient functions just by the easy operation of touching the screen.
1Touch   (left side)/  (right side) of   on 
the Touch Menu to display Touch Function 
icons. (l27)
2Touch the Touch Function icon.
(e.g. AF/AE tracking)
≥ To cancel, touch the Touch Function icon again. (Optical 
Image Stabilizer Lock is canceled by releasing the finger 
touching .)
Touch function icons
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
Zoom operation can...

53VQT3Y41
It is possible to set the focus and exposure to the subject specified on the touch 
screen.
The focus and exposure will keep following the subject automatically even if it moves. 
(Dynamic tracking)
1Touch .≥When [FACE RECOG.] ( l63) is [ON] and a registered face is detected, the target is 
automatically locked.
2 Touch the object and lock the target.≥ When you touch the head of the object, the target 
frame on the head gets locked and tracking starts.
≥ Touch the object to be changed again...

54VQT3Y41
In Motion Picture Recording Mode, you can further improve optical image stabilization 
by touching and holding  . With this function, you can further reduce the effects of 
the shake that tends to occur when using zoom.
1 Press the Optical Image Stabilizer button to turn the image stabilizer on.
2 Touch and hold  .
≥Icon is displayed in  A while you are touching  .
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of   disappear
Display...

55VQT3Y41
Select the operation icons to add different effects to the images to be recorded.
1Touch   (left side)/  (right side) of   on the Touch Menu to 
display the operation icons. (l27)
2Touch an operation icon.
(e.g. PRE-REC)
≥ Select the operation icon again to cancel the function.
Refer to the respective pages for canceling the following 
functions.
jSmile Shot ( l57)
j Built-in flash ( l58)
j Self-timer ( l58)
j Guidelines ( l59)
j Video Light ( l60)
≥ The icon is displayed in  A when the...

56VQT3Y41
When you start recording, the image/audio gradually 
appears. (Fade in)
When you pause recording, the image/audio gradually 
disappears. (Fade out)
≥The Fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
≥The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white 
saturation in bright parts at the same time. Both bright and dark parts can be recorded 
clearly.
≥...

57VQT3Y41
≥After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3 
seconds before pressing the recording start/stop button cannot be recorded.
≥Images displayed on the thumbnail in Playback Mode will differ from the motion pictures 
displayed at the start of playback.
When a smiling face is detected during motion picture recording, the unit 
automatically records a still picture.
The icon changes each time it is touched. ([ON])  # ([FACE RECOG.])  # [OFF]
≥ During...

58VQT3Y41
When the   button is pressed, the flash is activated and the picture will be 
recorded. Use the Built-in flash in order to record still pictures in dark places.
Each time the icon is selected, the indication changes by one setting in the following order:
ß ([ON])  # ß A ([AUTO])  #  ([OFF])
≥ The unit automatically determines if the flash is necessary even when it has been set to 
 by detecting the ambient brightness. (If it determines that the flash is necessary, the 
 indication lights up in...

59VQT3Y41
≥Setting the Self-timer to Ø2 is a good way to prevent image shake when the   button is 
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be 
clear.
This makes the image brighter to prevent darkening of a backlit subject.
A more impressive image can be obtained by focusing on the object only in close-up 
and shading off the background.
≥ The unit can focus...

60VQT3Y41
This function allows you to record color images in very low light situations. (Minimum 
required illumination: approx. 1 lx)
≥Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
≥ Using a tripod is recommended.
≥ In darker areas, Auto Focus may focus a bit slower. This is normal.
It is possible to record with illumination even in dark...