Panasonic Hc V700 Owners Manual

31VQT3Y41
1Change the mode to  .
2Open the LCD monitor.
3Press the recording start/stop 
button to start recording.
ARecording button icon
B When you begin recording,  ; changes 
to  ¥.
≥ Recording can also be started/stopped by touching the recording button icon. This icon 
functions in the same manner as the recording start/stop button.
4Press the recording start/stop button again to pause recording.
∫ Screen indications in the Motion Picture Recording Mode
≥Screen display will disappear when no touch...

32VQT3Y41
When you record with the [REC MODE] set to [iFrame], the scenes longer than 
approximately 20 minutes will be automatically divided. (Recording will continue.)
≥ (Maximum recordable scenes of a single SD card or built-in memory)
≥ Maximum number of recordable scenes and maximum number of different dates will be 
less than above table when there are both iFrame scenes and still pictures recorded on an 
SD card or the built-in memory.
≥ While recording is in progress, the recording will not stop...

33VQT3Y41
1Change the mode to  .
2Open the LCD monitor.
3Press the   button halfway. 
(For Auto Focus only)
Focus indication:
4Press the   button fully.
≥ If you set the Optical Image Stabilizer function ( l50) to   ([MODE1]), then the Image 
Stabilizer function will be more effective. (  (MEGA Optical Image Stabilizer) will be 
displayed when the   button is pressed halfway.)
≥ In dark environments, the video light will turn on.
≥ Using a flash or tri pod is recommended when recording  still pictures in...

34VQT3Y41
∫About the screen indications in Still Picture Recording
∫ About the focus indication
≥The focus indication indicates the status of the Auto Focus.
≥ The focus indication does not appear in Manual Focus Mode.
≥ The focus indication does not appear or has difficulty focusing in the following cases.
jWhen close subjects and far subjects are included in the same scene
j When the scene is dark
j When there is a bright part in the scene
j When the scene is filled with only horizontal lines
∫ About...

35VQT3Y41
The following modes (appropriate for the condition) are set just by pointing the unit to what 
you want to record.
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
≥ Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight, or Low Light Mode, the face will be surrounded by a white frame 
when detected. In the Portrait Mode, a subject that is bigger and close to center of the 
screen will be surrounded  by an...

36VQT3Y41
∫Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate 
and automatically adjust the color balance and focusing.
Depending on the brightness of the subject etc., the aperture and shutter speed are 
automatically adjusted for an optimum brightness.
≥Color balance and focus may not be adjusted automatically depending on light sources or 
scenes. If so, manually adjust these settings. ( l75, 77)
Automatic White BalanceThe illustration shows...

37VQT3Y41
1Change the mode to  .
2Touch the play mode select icon A. 
(l 27)
3
Select the still picture  B or the recording 
format of the motion picture  C you wish 
to play back.
Select the media type  D and then select 
the still picture  B or the recording format 
of the motion picture  C
 you wish to play 
back.
≥ Touch [ENTER].
≥ Icon is displayed in the thumbnail display when the item for motion picture is touched.
( , , , ,  and  )
≥  is displayed in the 1080/60p scenes and   is displayed in the...

38VQT3Y41
5Select the playback operation by touching the operation icon.
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the 
following order if the zoom lever is operated to   side or   side.
20 scenes  () 9 scenes ()  1 scene () Highlight & Time Frame 
Index* ( l82)
* Highlight & Time Frame Index can only set in Motion Picture  Playback Mode.
≥ 9 scenes display returns if the unit is turned off or the mode is changed.
≥ By displaying in 1 scene or...

39VQT3Y41
≥If pause play is continued for approx. 5 minutes, the screen returns to the thumbnails.
≥ The elapsed time for playback indication will be reset to 0h00m00s each scene.
≥ When played back with [ALL AVCHD] selected,  the screen may become black momentarily 
at the time the scene switches.
Motion picture compatibility
≥ This unit is based on AVCHD Progressive/AVCHD format/MPEG-4 AVC file format.
AVCHD Progressive format
≥ Video signal for the AVCHD Progressive that can be played back with this...

40VQT3Y41
≥Touch   (left side)/   (right side) of   on the Touch Menu to display  . ( l27)
1Touch .
2Touch the top menu  A.
3Touch the submenu B.
≥Next (previous) page is displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide display is...