Panasonic Hc V700 Owners Manual

							51VQT3Y41
This is a recording mode that can record in 1080/60p (1920k1080/60 progressive), which is 
the highest picture quality for this unit.
It is also possible to set from the menu.
≥ Please refer to page 156 for details about approximate recordable time.
Advanced (Recording)
1080/60p recording
: [RECORD SETUP]  # [REC MODE] # [1080/60p]
0Ò0Ñ0Ù0Ñ0Ð0×0Ñ1
1080/60p button
To set to 1080/60p recording mode, press and 
hold the button until   is displayed.
≥
To return to normal recording mode, press and 
hold the button until   disappears.
MENU
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  51 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							52VQT3Y41
You can record using convenient functions just by the easy operation of touching the screen.
1Touch   (left side)/  (right side) of   on 
the Touch Menu to display Touch Function 
icons. (l27)
2Touch the Touch Function icon.
(e.g. AF/AE tracking)
≥ To cancel, touch the Touch Function icon again. (Optical 
Image Stabilizer Lock is canceled by releasing the finger 
touching .)
Touch function icons
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
Zoom operation can be performed by touching on the touch zoom bar.
≥Touch zoom function is useful for making fine adjustments to the zoom magnification.
1Touch .≥Touch zoom bar appears.2 Touch and hold the touch zoom bar.≥It will zoom to the touched position.
≥ It will zoom in when T side is touched, and zoom out when 
W side is touched.
≥
It is also possible to perform zoom operation by touching and 
sliding the touch zoom bar toward the T side or the W side.
≥ Please refer to page 49 for details about the zoom speed.
Advanced (Recording)
Recording with the Touch Function
T
W
Touch Zoom
AF/AE tracking
Optical Image Stabilizer Lock
*1
Touch Shutter*2

≥An icon is displayed in the 
A position when the Touch 
Function icon is set.
Touch Zoom
B Touch zoom bar
C Zoom magnification 
position
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  52 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							53VQT3Y41
It is possible to set the focus and exposure to the subject specified on the touch 
screen.
The focus and exposure will keep following the subject automatically even if it moves. 
(Dynamic tracking)
1Touch .≥When [FACE RECOG.] ( l63) is [ON] and a registered face is detected, the target is 
automatically locked.
2 Touch the object and lock the target.≥ When you touch the head of the object, the target 
frame on the head gets locked and tracking starts.
≥ Touch the object to be changed again when you want 
to change the target.
≥ When the Intelligent Auto Mode is selected, the setting 
becomes   (Normal) and touched object is tracked. 
Selection becomes   (Portrait) when target frame is 
locked on a face. (It may turn to   (Normal) even if 
the target is locked on the face when a spotlight is 
shining or with a dark scene.)
3 Start recording.
∫ About target frame
≥When target lock fails, the target frame blinks in red and then disappears. Touch a 
characteristic part (color etc.) on the object to lock onto it again.
≥ When the   button is pressed halfway in Still  Picture Recording Mode, the focus is set to 
the object that is locked. The target frame turns green when it focuses, and the target 
cannot be changed.
≥ This function cannot be used in Manual Mode. When Manual Mode is set in Still Picture 
Recording Mode, it can only be used with some settings in Scene Mode.
≥ It may track different objects or may not lock the target depending on the recording 
conditions such as the following:
jWhen the object is too large or too small
j When color of the object is similar to the background
j When the scene is dark
≥ When the target is locked in Still Picture Recording Mode, the screen may become dark or 
the AF assist lamp may be performed. ( l73)
≥ AF/AE tracking will be canceled in the following cases.
jWhen the mode is changed
j When the unit is turned off
j When the Scene Mode is set
j Switch to Intelligent Auto Mode/Manual Mode
j Switch to recording of yourself
AF/AE tracking
A Target frame
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  53 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							54VQT3Y41
In Motion Picture Recording Mode, you can further improve optical image stabilization 
by touching and holding  . With this function, you can further reduce the effects of 
the shake that tends to occur when using zoom.
1 Press the Optical Image Stabilizer button to turn the image stabilizer on.
2 Touch and hold  .
≥Icon is displayed in  A while you are touching  .
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of   disappear
Display of   will not disappear even when no operation is performed for specific time with 
the setting at the time of purchase. To make the display of   disappear, change the 
setting of the [O.I.S. LOCK DISPLAY].
≥Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickl y, release Optical Image Stabilizer Lock.
It is possible to focus and record a still picture of a subject that is touched.
1Touch .
2 Touch the subject.
≥ Focus area is displayed at the touched position, and a 
still picture is recorded.
≥Depending on the recording conditions or recognition of the touched position, it may not be 
possible to record the intended picture.
≥ This will not operate for recording yourself.
Optical Image Stabilizer Lock
: [SETUP]  # [O.I.S. LOCK DISPLAY]  # desired setting
[ON]:Constantly displayed.
[OFF]:The Icon will disappear after approx. 5 seconds without any touch operation.
Touch Shutter

MENU
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  54 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							55VQT3Y41
Select the operation icons to add different effects to the images to be recorded.
1Touch   (left side)/  (right side) of   on the Touch Menu to 
display the operation icons. (l27)
2Touch an operation icon.
(e.g. PRE-REC)
≥ Select the operation icon again to cancel the function.
Refer to the respective pages for canceling the following 
functions.
jSmile Shot ( l57)
j Built-in flash ( l58)
j Self-timer ( l58)
j Guidelines ( l59)
j Video Light ( l60)
≥ The icon is displayed in  A when the operation icon is set. 
(PRE-REC or self-timer icon is displayed in  B.)
Operation icons
*1 Not displayed in Still Picture Recording Mode.
*2 Not displayed in Motion Picture Recording Mode.
≥ The operation icons that are displayed in the Touch Menu can be changed.
([SELECT OPERATION ICONS]  l44)
≥ If you turn off the unit or change the mode to  , PRE-REC, Backlight compensation, 
Color night rec, Self-timer and Tele Macro functions are canceled.
≥ If you turn off the unit, the Fade function is canceled.
≥ It is possible to set from the menu.
Advanced (Recording)
Recording functions of operation 
icons
PRE-REC
PRE-REC
B
Fade*1
Intelligent Contrast Control*1
PRE-REC*1
Smile Shot*1
Built-in flash*2
Red-Eye Reduction*2
Self-timer*2
Intelligent Exposure*2
Backlight Compensation
Te l e  M a c r o
Guidelines
Color Night Rec
*1
Video Light
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  55 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							56VQT3Y41
When you start recording, the image/audio gradually 
appears. (Fade in)
When you pause recording, the image/audio gradually 
disappears. (Fade out)
≥The Fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
≥The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white 
saturation in bright parts at the same time. Both bright and dark parts can be recorded 
clearly.
≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not 
be clear.
This allows recording of the pictures and sound to start approximately 3 seconds 
before the recording start/stop button is pressed.
≥  appears on the screen.
≥Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
jIf you change the mode
j If you remove the SD card
j If you remove the SD card while [MEDIA SELECT] is set to [VIDEO/SD CARD]
j If you touch 
j If you press 
the 1080/60p button
j If you turn the unit off
j If you start recording
j After 3 hours have passed
Fade
: [RECORD SETUP]  # [FADE COLOR]  # 
[WHITE] or [BLACK]
Intelligent Contrast Control
PRE-RECThis prevents you from missing a shot.
(Fade in)
(Fade out)
MENU
PRE-REC
HC-V700
HC-V700M
MENU
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  56 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							57VQT3Y41
≥After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3 
seconds before pressing the recording start/stop button cannot be recorded.
≥Images displayed on the thumbnail in Playback Mode will differ from the motion pictures 
displayed at the start of playback.
When a smiling face is detected during motion picture recording, the unit 
automatically records a still picture.
The icon changes each time it is touched. ([ON])  # ([FACE RECOG.])  # [OFF]
≥ During Smile Shot recording, the face detected as a smiling face is surrounded by a green 
frame and  /  are red.
≥ Smile Shot recording will not work in the following cases. ( /  will flash)
j
When there is no SD card inserted
j When it is set to [PICTURE/SD CARD] in [MEDIA SELECT], and there is no SD card 
inserted
j When it is set to Manual Focus
j When [FACE RECOG.] is set to [OFF], or no one is registered (In  ([FACE RECOG.])
 
only)
≥ Depending on the recording conditions (type of smile, camera shake, etc.), the face of the 
subject may not be detected correctly. 
≥ The number of recording pixels are  (3200 k1800) or  (1920 k1080). ( l70)
≥ When still pictures that have been recorded using the Smile Shot are displayed as 
thumbnails, the   appears.
≥ When the AF/AE tracking function is target locking a face of the subject, still pictures are 
only recorded if a smiling face is detected on the locked subject. When the Smile Shot 
function is set to   ([FACE RECOG.]), it will record only if the face of a subject registered 
with [FACE RECOG.] is locked as a target.
Smile Shot
:The unit records a still picture on detecting a smiling face.
:Still pictures are only recorded when the face of a person registered using Face 
Recognition ( l63) is detected.
[OFF]Cancel the setting.
HC-V700
HC-V700M
5.8M2.1M
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  57 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							58VQT3Y41
When the   button is pressed, the flash is activated and the picture will be 
recorded. Use the Built-in flash in order to record still pictures in dark places.
Each time the icon is selected, the indication changes by one setting in the following order:
ß ([ON])  # ß A ([AUTO])  #  ([OFF])
≥ The unit automatically determines if the flash is necessary even when it has been set to 
 by detecting the ambient brightness. (If it determines that the flash is necessary, the 
 indication lights up in red.)
∫To adjust the brightness of the flash
≥If the  ß indication etc. flashes when the   button is pressed halfway, the flash is not 
activated.
≥ Do not use with the filter kit (optional) or Conversion Lens (optional) attached.
≥ The available range of the flash is approx. 1 m to 2.5 m (3.3 feet to 8.2 feet) in dark places.
≥ Using the flash fixes a shutter speed to 1/500 or slower.
Reduces the phenomena where human eyes become red from flashes.
≥ The flash is activated 2 times.
≥ The red-eye phenomenon tends to appear in certain recording conditions and more with 
some people than with others.
≥ When faces are detected in the Intelligent Auto Mode, the Red-Eye Reduction is set to on.
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Ø 10 (Records after 10 seconds)  # Ø2 (Records after 2 seconds)  # setting canceled
≥ When you press the   button,  Ø10 or Ø2 flashes for the set period before a still picture 
is recorded. After recording, the Self-timer is canceled.
≥ In Auto Focus Mode, if the   button is pressed halfway once and then fully, the lens 
focuses on the subject when the button is pressed halfway. If the   button is pressed 
fully all at once, the lens focuses on the subject just before recording.
To stop the timer midway throughTouch [CANCEL].
Built-in flash
: [PICTURE]  # [FLASH LEVEL]  # desired setting
ßi :Much brighter
ßd 0:Normal
ß j :Less bright
Red-Eye Reduction
Self-timer
MENU
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  58 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							59VQT3Y41
≥Setting the Self-timer to Ø2 is a good way to prevent image shake when the   button is 
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be 
clear.
This makes the image brighter to prevent darkening of a backlit subject.
A more impressive image can be obtained by focusing on the object only in close-up 
and shading off the background.
≥ The unit can focus on the subject at a distance of approx. 60 cm (24 q).
≥ When the Tele Macro is set with the zoom magnification less than 26 k in Motion Picture 
Recording Mode, it will automatically be set to 26 k.
≥ When the aspect ratio is [4:3], [3:2] during the Still Picture Recording Mode and tele macro 
is set with the zoom magnification less than 21 k, the zoom magnification will automatically 
be set to 21 k. When the aspect ratio is [16:9], the zoom magnification will be 26 k.
≥ The Tele Macro function is canceled automatically when the zoom magnification becomes 
lower than 26 k in Motion Picture Recording Mode.
≥ Tele Macro function is canceled automatically when the zoom magnification becomes 
lower than the sizes below in Still Picture Recording Mode: 
jLess than 21 k (when the aspect ratio is [4:3] or [3:2])
j Less than 26 k (when the aspect ratio is [16:9])
You can check if the image is level while recording or playing back motion pictures 
and still pictures. The function can also be used to estimate the balance of the 
composition.
It will switch every time  the icon is touched.
  #   #   # Setting canceled
≥ The guidelines do not appear on the images actually recorded.
∫ Displaying Guidelines at playback
≥Change the mode to   and touch the play mode select icon. Then, select the 
AVCHD scene, or set to [iFrame] or [MP4]. ( l37)
≥ To cancel the Guideline function during playback, set to [OFF].
≥ It cannot be set while in Still Picture Playback Mode.
Intelligent Exposure
Backlight Compensation
Tele Macro
Guidelines
: [VIDEO SETUP]  # [GUIDE LINES]  # desired settingMENU
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  59 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分 
						

							60VQT3Y41
This function allows you to record color images in very low light situations. (Minimum 
required illumination: approx. 1 lx)
≥Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
≥ Using a tripod is recommended.
≥ In darker areas, Auto Focus may focus a bit slower. This is normal.
It is possible to record with illumination even in dark places.
Each time the icon is selected, the indication changes by one setting in the following order.  ([ON])  #  ([AUTO])  #  ([OFF])
≥When set to   ([AUTO]), the video light turns on in Low Light Mode in Intelligent Auto 
Mode.
≥ When the video light is in use, the recordable time when using the battery is shortened.
≥
The (approximate) available range of the video Light is approximately up to 1.2 m (3.9 feet).≥ Using the Color Night Rec function at the sa me time will make conditions even brighter.
≥ When you take a picture in a dark place in still picture recording mode with the [AF ASSIST 
LAMP] set to [AUTO] ( l73), and the video light set to   ([AUTO]) or   ([OFF]), the 
lamp is turned on to make it easier to focus.
≥ Set the video light to   ([OFF]) at places where using a light is prohibited.
Color Night Rec
Video Light
:Always on.
:Turns on/off automatically according to brightness of the surroundings.
:Cancel the setting.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book  60 ページ  ２０１１年１２月２８日　水曜日　午前１０時２１分