Panasonic Hc V550 Owners Manual

- 131 -
Touch [Setup] on the screen of this unit, and select the item you want to set.
∫[Notification Setup]
This sets whether to send a notification to the smartphone when a sound is detected.
∫[Notification Test]
This tests if a notification can be sent to the smartphone when a sound is detected.
∫[Remote Voice Level]
This sets the voice message volume.
∫[Sound Detection Sensitivity]
This sets the sound detection sensitivity.
Changing [Baby Monitor] settings
[ON]/[OFF]
(Volume high)/ (Volume low)...

- 132 -
You can confirm the recording screen of this unit from outside using a smartphone.
Preparations before using [Home Cam]
1Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Install the smartphone application “Image App” on your smartphone. ( l150)
3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
≥If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the 
device will be displayed when starting...

- 133 -
Using [Home Cam]
≥Perform the home monitoring operation on the smartphone. ( l136 )
≥ When the firewall is turned on, the Wi-Fi function  may not work correctly. If this occurs, check the 
network settings.
∫ If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to ON.
1Turn off the Wi-Fi setting of the smartphone.
2Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance sc reen is displayed, select [NO].
3Enable the home monitoring setting...

- 134 -
6Enter the Device ID and Password displayed on the screen of this unit into 
the smartphone.
≥When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS 
device).
≥ If you want to check the Device ID and Password after performing Step 7, on the screen of this 
unit, touch [Setup]  # [Home Monitor Connect].
7Touch [ENTER] on the screen of this unit.≥Check that the message “Connecting...” has disappeared from this unit.
8On the smartphone, select [Start “Home Cam”?]...

- 135 -
3Touch the smartphone on   of this unit.≥If the unit is not recognized even when touching the smartphone, 
change positions and try again.
≥ A confirmation screen is displayed on the screen of a 
smartphone. Touch [YES] to start home monitor.
≥ This unit will be turned on if it is touched on the   by a 
smartphone even when this unit was turned off using the LCD 
screen.
∫ If the device is Android (n on-NFC-compatible) or iOS
1Press Wi-Fi button and touch [Home Cam]. 
2Start up the smartphone...

- 136 -
≥Even with a broadband line, the recommended optimal speed may not be reached depending on 
your environment.
≥ Narrowband lines such as analog modems cannot be used.
≥ If the line for the smartphone is switched, communication may be interrupted. In that case, 
connect again.
≥ Refer to [Help] in the “Image App” menu about how to operate.
What you can operate/set with a smartphone during home monitoring
∫ What you can operate with a smartphone
Confirm the condition inside the house
The monitoring...

- 137 -
≥Setting cannot be performed while operating monitoring with a smartphone.Touch [Setup] and select desired setting.
∫ [Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
≥If [QR code] is touched, a QR code will be displayed on the screen of this unit.
∫ [Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
≥The mode cannot be switched to another one during home monitoring operations.
≥...

- 138 -
Connecting this unit to a DLNA-compatible device via Wi-Fi, you can playback scenes and still 
pictures on the DLNA device.
ADLNA-compatible Device
Preparations before using [DLNA Play]
1Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the Device is DLNA-compatible.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥[WPS Connection] ( l153 )
≥ Searching for wireless access points to set up a connection ( l154)
≥ Setting up a connection...

- 139 -
2Select this unit (SSID) by the TV side.≥Select SD media and select the motion picture ([AVCHD/MP4]) or still picture ([JPEG]) to play 
back.
3Perform playback operations with the TV remote control.≥Playback operations may differ depending on the TV in use.
≥ The following operations can be performed if a color button is 
pushed.
Blue/Red: Skip playback
≥ Fast forward/Fast rewind playback cannot be performed.
≥ You cannot perform playback operations with this unit.
To exit [DLNA Play]:Touch...

- 140 -
By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still 
pictures recorded with this unit to the PC.
APC
Preparations before using [Copy]
1Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the PC and the wireless access point are connected via Wi-Fi.
≥You can also use a LAN cable to connect the PC and the wireless access point.3 Set up a Wi-Fi connection between this unit and the wireless access point.≥[WPS Connection] ( l153...