Panasonic Hc V550 Owners Manual

- 161 -
It takes long time every 
time to connect to a 
smartphone.≥It may take longer time to connect depending on the Wi-Fi 
connection setting of the smartphone, but it is not a 
malfunction.
This unit is not displayed 
in the Wi-Fi setting screen 
of the smartphone.
≥ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi 
settings of the smartphone.
The Wi-Fi connection is 
disconnected immediately.
≥ If there is a setting for avoiding poor connections in the Wi-Fi 
setting menu of the Android...

- 162 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1Press Wi-Fi button and touch [Wi-Fi Setup]. 
2Touch desired menu item.
You can add or delete wireless access points, or rearrange the display order of wireless access 
points.
≥Up to 3 wireless access points can be set.
≥ Please refer to page 153 for details about [Wireless Settings].
To add a wireless access point
1 Touch the part where no wireless access points 
are...

- 163 -
This item allows you to use NFC to turn on this unit, establish a remote connection, and configure 
the home monitoring settings.
Please refer to page 137.
If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in 
Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is 
reduced.
≥ When the LCD monitor is turned off, you can display the screen by touching it.
≥ If the Wi-Fi connection is turned off, this unit will turn...

- 164 -
You can view and change this unit’s Device name (SSID), which is used for operating this unit as a 
wireless access point.
1Touch [INPUT], and enter the desired Device name (SSID).≥Input up to 20 characters are recommended.  All the characters cannot be confirmed when 
displaying the Device names on this unit if a long Device name is used. ( l157)
≥ For details on how to enter characters, refer to page  87.
2 Touch [EXIT].
≥If you are going to connect directly to a smartphone after changing the...

- 165 -
You can change the workgroup setting.
≥When copying scenes or still pictures to a PC using a Wi-Fi function [Copy], you need to create a 
shared folder on the PC and connect this unit to the workgroup to which the PC belongs. (The 
default setting is WORKGROUP.)
≥ For information on how to create a shared folder, refer to page  141.
≥ For details on how to enter characters, refer to page  87.
≥ A maximum of 15 characters can be entered.
Acquire a “LUMIX CLUB” Login ID (free).
You can upload the...

- 166 -
∫
Check or change the acquired Login ID/Password
≥To change the “LUMIX CLUB” Password on this unit, access the “LUMIX CLUB” website from 
your smartphone or PC and change the “LUMIX CLUB” Password in advance.
1 Press Wi-Fi button and touch [Wi-Fi Setup]. 
2 Touch [LUMIX CLUB].
3 Touch [Add/Change Account].
4 To u c h  [
Change Account].≥The Login ID and Password are displayed.
≥ The Password is displayed as “ ”.
5 To u c h  [Login ID] or [Password].
6 Enter the Login ID or Password, and touch...

- 167 -
When sending images to WEB services, the WEB service being used must be registered with the 
“LUMIX CLUB”. Registering multiple WEB services will send images to all services simultaneously.
≥Check the “FAQ/Contact us” on the following site for compatible WEB services.
http://lumixclub.panasonic.net/eng/c/
Preparation:
Make sure that you have created an account on the WEB service you want to use, and have the 
login information available.
1 Connect to the “LUMIX CLUB” site using a smartphone or...

- 168 -
HD Writer LE 2.1
You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, 
DVD discs or SD cards using HD Writer LE 2.1, the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer LE 2.1 (PDF file) for details on how to use it.
∫
Smart Wizard
The Smart Wizard Screen is automatically displayed when you connect this unit to a PC with 
HD Writer LE 2.1 installed. ( l176 )
Copy to PC:
You can copy motion/still picture data...

- 169 -
≥It is impossible to write data to this unit from a PC.
≥ Motion pictures that have been recorded on another device cannot be written to the 
software supplied with this unit.
≥ When motion picture data is written to and read from the SD card, correct operation of the unit 
cannot be guaranteed if software other than that supplied with the unit is used.
≥ Do not start the software supplied with this unit and other software at the same time.
∫ About Conversion Assist Function
When you want to...

- 170 -
End User License Agreement
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for the 
Software defined in this End User License 
Agreement (“Agreement”) on condition that you 
agree to the terms and conditions of this 
Agreement.
Article 1 License
Licensee is granted the right to use the 
software, including the information recorded or 
described on the CD-ROM, instruction manuals, 
and any other media provided to Licensee 
(collectively...