Panasonic Hc V100 Owners Manual

71VQT3Y04
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted 
after dividing.
≥Change the mode to  , and set [VIDEO/PICTURE] of the play mode selection to 
[AVCHD]. (l 36)
1Select the menu.
2Select the scene you wish to divide using the cursor button and 
press the ENTER button.
3Select  to set the dividing point.
≥It is convenient to use Slow-motion Playback and 
Frame-by-frame Playback. ( l63)
≥ Select [YES] to continue dividing the same...

72VQT3Y04
Dividing a scene to partially delete (iFrame)
Divide the iFrame scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥Change the mode to  , and set [VIDEO/PICTURE] of the play mode selection to 
[iFrame]. (l 36)
1Select the menu.
2Select the scene you wish to divide using the cursor button and 
press the ENTER button.
3Select  to set the dividing point.
≥It is...

73VQT3Y04
Protecting scenes/still pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥ Change the mode to  .
1Select the menu.
2Select the scene/still picture to be protected using the cursor button, 
then press the ENTER button.
≥The scene/still picture is selected and the   indication appears on the thumbnail. Press 
the ENTER button again to cancel the operation.
≥ Press the...

74VQT3Y04
≥Use the AV multi cable (supplied) or HDMI mini cable (optional) and check the output 
settings. ( l77)
≥ HDMI is the interface for digital devices. If you connect this unit to an HDMI compatible 
high definition TV and then play back the recorded high-definition images, you can enjoy 
them in high resolution with high quality sound.
1Connect this unit to a TV.
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible with the terminals....

75VQT3Y04
≥Check that the plugs are inserted as far as they can go.
≥ Always use a genuine Panasonic HDMI mini  cable (RP-CDHM15, RP-CDHM30: optional).
≥ Do not use any other AV multi cables except the supplied one.
≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable 
is not required.
≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug 
of the AV multi cable. Image may not display when the component terminal plug is...

76VQT3Y04
∫To watch images on a regular 
TV (4:3) or when both sides of 
the images do not appear on 
the screen
Change the menu setting to display the 
images correctly. (Check the TV setting.)
≥When this setting is set to [4:3] and the 
unit is connected to a television using the 
AV multi cable, the image may appear in a 
shrunken form.
Example of images with a [16:9] aspect 
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust 
the aspect setting on the TV. (Refer to the 
operating...

77VQT3Y04
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on information from the 
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method 
[1080i] or [480p] which enables the images to be displayed on your TV. (Please read the 
operating instructions for the TV.)
Connecting with the AV multi cable
AV multi connector output setting can be changed.
Changing the component...

78VQT3Y04
¬Change the mode to  .
1Select the menu.
≥If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with VIERA Link 
with a HDMI mini cable.
A HDMI mini cable (optional)
B Panasonic TV compatible with VIERA Link
≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there 
are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the 
TV for how to set,...

79VQT3Y04
3Operate with the remote control for the TV.
1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the center to set it.
2) Activate the operation icons that are displayed on TV screen with the remote control for  the TV.
A Operation icons
B Display operation icons
C Cancel operation icons
D Display/Cancel operation icons
≥
The following operations are available by pressing the color buttons on the remote control.j Green:...

80VQT3Y04
Motion pictures or still pictures recorded with this unit can be copied from a built-in memory to 
an SD card inserted in this unit.
∫Check the used space of the SD card
It is possible to check the used space of the SD card by [MEDIA STATUS] ( l45).
≥ Depending on the media condition, some remaining capacity of the SD card may not be 
used.
≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD 
cards following the instruction on the screen. In this case, the...