Panasonic Hc V100 Owners Manual

61VQT3Y04
Manual shutter speed/Iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥Press the iA/MANUAL button to switch to Manual Mode. ( l59)
1Select [SHTR] or [IRIS] using the cursor button.
2Press 2/ 1 to adjust settings.
A: Shutter speed:
1/60 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the 
shutter speed will be set between 1/30 and 
1/8000.
≥ The shutter speed closer to 1/8000 is faster.
B : Iris/Gain value:...

62VQT3Y04
Recording with Manual Focus
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥Press the iA/MANUAL button to switch to Manual Mode. ( l59)
1Press 4 to switch the manual icon.
2Select [MF] using the cursor button to change to Manual Focus.≥MF appears on the screen.
3Press 2/ 1 to adjust the focus.
≥To restore Auto Focus, select [AF] or press the iA/MANUAL button.
:To focus on a close subject
:To focus on a faraway subject
MF MF
5/5 NEXT
5/5 NEXT
5/5 NEXT
MF
MF...

63VQT3Y04
Motion picture playback using operation icon
For details on the basic playback operations, refer to page 36.
Advanced (Playback)
Playback Operations
Playback 
operationCursor button/
Playback displayOperating steps
Fast forward/
rewind playback During Playback
Press 
1 of the cursor button during 
playback to fast forward.
(Press  2 to rewind.)
≥ Press again to speed up fast forward/
rewind (the screen display will change 
from  5 to  ).
≥ Normal playback is restored when you 
press  3....

64VQT3Y04
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
The picture size of the still picture to be created will differ depending on the recording mode 
of the recorded motion picture.
Press the   button at the location to be saved as a still picture during 
the playback.
≥It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
≥ The date the motion picture was recorded will be registered as date of the...

65VQT3Y04
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was 
stopped.
If playback of a motion picture is stopped,   appears on the thumbnail view of the stopped 
scene.
≥The memorized resume position is cleared if you turn off the unit or change the mode. (The 
setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback 
(Playback zoom)
You can zoom in on still pictures during playback.
1Move the zoom...

66VQT3Y04
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1Select the date select icon 
using the cursor button, then 
press the ENTER button.
2Select the playback date, then press the ENTER button.The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3Select the scene or the still picture to be played back, then press the 
ENTER button.
≥Playing back of all the scenes or...

67VQT3Y04
Changing the playback settings and playing back the 
slide show
1Select   using the cursor button, 
then press the ENTER button.
2(Only when you would like to change the settings)
Select the desired item and press the ENTER button.
3(When [DATE SETUP] is selected)
Select the playback date, then 
press the ENTER button.
(When [SLIDE INTERVAL] is selected)
Select the desired item and press the ENTER button.
(When [MUSIC SELECT] is selected)
Select the desired sound and 
press the ENTER button....

68VQT3Y04
4Select [START] and press the ENTER button.
5Select the playback operation. (l36)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Select the desired item and press the ENTER 
button.
≥ To adjust the volume of music during playback of the slide show, operate the volume lever. 
(l 37)
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book  68 ページ  ２０１２年１月５日　木曜日　午前１０時２０分 

69VQT3Y04
¬Change the mode to  .
∫ To delete scenes or still pictures from the thumbnail display
1Press the Optical image stabilizer/Delete button while the thumbnail 
view screen is displayed.
2Select [ALL SCENES] or [SELECT] 
using the cursor button, then 
press the ENTER button.
≥All the scenes or still pictures displayed as 
thumbnails will be deleted by selecting 
[ALL SCENES].
(In case of playing back scenes or still pictures by date, all the scenes or still pictures on 
the selected date will be...

70VQT3Y04
To complete editingPress the MENU button.
≥You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ You can also delete still pictures by pressing the MENU button, selecting [PICT. SETUP]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ Scenes which cannot be played back (the thumbnails are displayed as  ) cannot be 
deleted.
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still 
pictures.
≥ If you...