Panasonic Hc V100 Owners Manual

101VQT3Y04
Major confirmation/error messages to be indicated on the screen in text.
*  only
Others
Messages
PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*
We recommend backing up important recorded motion pictures and still pictures 
periodically to a PC, disc, etc. to protect it. (l86) This message does not indicate that 
there is a problem with this unit.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still...

102VQT3Y04
About recovery
If faulty management information is found, the messages may appear and a repair is 
performed. (Repairing may take time depending on the error.)
≥ is displayed when abnormal management information is detected when the scenes 
are displayed in thumbnail.
≥ If the unit is turned off during video recording, scenes of less than 30 seconds are not 
recorded.
≥Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to...

103VQT3Y04
∫It is not a malfunction in the following cases
Others
Troubleshooting
A clicking sound is heard 
when the unit is shaken. ≥
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned 
on and change the mode to  .
Object seems to be 
warped. ≥
Object seems to be warped slightly when the object moves 
across the image very fast, but this is because the unit is 
using MOS for the image sensor. This is not a malfunction.
Power
ProblemCheck...

104VQT3Y04
Indication
ProblemCheck points
Remaining battery 
indication is not 
displayed properly. ≥
The remaining battery capacity indication is an 
approximation.
If the remaining battery capacity indication is not 
displayed correctly, fully charge the battery, discharge it 
and then charge it again.
The remaining time 
indication or the elapsed 
time indication is not 
shown. ≥
[DISPLAY] of the [SETUP] is [OFF]. ( l40)
Recording
ProblemCheck points
The unit arbitrarily stops 
recording. ≥
Use an SD...

105VQT3Y04
Playback
ProblemCheck points
Scenes/still pictures 
cannot be played back. ≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
≥ Motion pictures recorded with other devices may not be 
possible to play back on this unit. (  is displayed.)
Scenes cannot be 
deleted. ≥
Release the protect setting. (l 73)
≥
Any scenes/still pictures where the thumbnails are displayed 
as   cannot be deleted. If the scenes/still pictures are 
unnecessary, format the media to...

106VQT3Y04
VIERA Link does not 
work.(Setting on this unit)
≥
Connect with a HDMI mini cable (optional). ( l78)
≥ Set [VIERA Link] to [ON]. ( l78)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the 
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the 
connected device.
Cannot copy scenes on 
the SD card by 
connecting to other...

107VQT3Y04
∫If AVCHD scenes do not change smoothly
The images may be still for several seconds at  the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions are applicable.
≥ A continuous recording of...

108VQT3Y04
Keep this unit as far away as possible from 
electromagnetic equipment (such as 
microwave ovens, TVs, video games etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥ Recorded data may be damaged, or 
pictures may be distorted, by strong 
magnetic fields created by speakers...

109VQT3Y04
Do not use the unit for surveillance 
purposes or other business uses.
≥This unit was designed for consumer 
intermittent use. It was not intended for 
continuous use, or for any industrial or 
commercial application resulting in 
prolonged use.
≥ In certain situations, continuous use could 
cause the unit to overheat and cause a 
malfunction. Such use is strongly 
discouraged.
When you are not going to use the unit 
for an extended time
≥ When storing the unit in a cupboard or 
cabinet, it is...

110VQT3Y04
≥Extremely high temperatures or low 
temperatures will shorten the life of the 
battery.
≥ If the battery is kept in high-temperature, 
high-humidity, or oily-smoky places, the 
terminals may rust and cause 
malfunctions.
≥ To store the battery for a long period of 
time, we recommend that you charge it 
once every year and store it again after 
you have completely used up the charged 
capacity.
≥ Dust and other matter attached to the 
battery terminals should be removed.
Prepare spare...