Panasonic Hc V10 Owners Manual

51VQT4C31
When you start recording, the image/audio gradually 
appears. (Fade in)
When you pause recording, the image/audio gradually 
disappears. (Fade out)
≥The Fade setting is canceled when the recording stops.
∫ To select the color for Fade in/out
≥The thumbnails of scenes recorded using fade in become black (or white).
≥ If the recordable time runs out when you start recording, the recording fades out and stops 
automatically.
This makes the image brighter to prevent darkening of a backlit subject....

52VQT4C31
This allows recording of the pictures and sound to start approximately 3 seconds 
before the recording start/stop button is pressed.
≥ appears on the screen.
≥Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
jIf you change the mode
j If you remove the SD card
j
/If you remove the SD card while [MEDIA SELECT] is set to [VIDEO/SD CARD]j If you press the MENU button
j If you turn the unit off
j If you start recording
j After 3 hours...

53VQT4C31
This brightens parts that are in shadow and difficult to see and suppresses white 
saturation in bright parts at the same time. Both bright and dark parts can be recorded 
clearly.
≥If there are extremely dark or bright parts or the brightness is insufficient, the effect may not 
be clear.
This function allows you to record color images in very low light situations. (Minimum 
required illumination: approx. 1 lx)
≥ Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the...

54VQT4C31
≥Change the mode to  .
When you record images in different situations, this mode automatically sets optimum shutter 
speeds and apertures.
≥ (Sunset/Low light)
jThe shutter speed is 1/30 or more.
≥ (Sunset/Fireworks/Scenery/Night scenery)
jImage may get blurry when close object is recorded.
≥ (Sports)
jDuring normal playback, the image movement may not look smooth.
j Color and screen brightness may change under indoor lighting.
j
If the brightness is insufficient, the Sports Mode does not...

55VQT4C31
Set the maximum zoom ratio.
≥The larger the digital zoom magnification, the more the image quality is degraded.
Switch the picture quality and recording format of the motion pictures to be recorded.
*1 Recording will have higher quality in the order of [1280 k720/60p] and [640 k480/60p].
*2 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended for when using a 
Mac.
∫About still picture recording size
The still picture recording size varies depending on the recording mode....

56VQT4C31
Detected faces appear with frames.
≥Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen 
take preference over others.
∫ Prioritized face framing
Prioritized face framing is displayed as orang e frames. Focus and adjustment of brightness 
will be performed against the prioritized face framing.
≥ Prioritized face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
If the unit continues to be...

57VQT4C31
This is for reducing the wind noise coming into the built-in microphones.
≥Switch to Manual Mode. ( l59)
≥This function’s default setting is [OFF].
≥ When switching to Intelligent Auto Mode, [WIND CUT] is set to [OFF], and the setting 
cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
When recording, the input level from the built-in microphones can be adjusted.
≥ Switch to Manual Mode. ( l59)
1 Select the menu.
2
(When [SETr]/[SET] is selected)Press...

58VQT4C31
Selecting the picture quality.
You can add a shutter sound when recording still pictures.
[QUALITY]
: [PICTURE] # [QUALITY] # desired setting
:Still pictures with a high picture quality are recorded.
:Priority is given to the number of still pictures recorded. Still pictures are recorded 
in normal picture quality.
[SHTR SOUND]
: [PICTURE] #  [SHTR SOUND] # desired setting
:Volume low
:Vo l u m e hi g h
[OFF]:Cancel the setting.
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  58 ページ  ２０１２年１月１３日　金曜日...

59VQT4C31
¬Change the mode to  .
Press the iA/MANUAL button to switch to Manual Mode.≥  appears on the screen.
≥  Press the ENTER button to display/not-display the manual icon.
≥ The page changes with each press of  4.
White Balance
Automatic White Balance function may not reproduce natural colors depending on the 
scenes or lighting conditions. If so, you can adjust the White Balance manually.
≥Press the iA/MANUAL button to switch to Manual Mode.
1Select [WB] using the cursor button.
2Press 2/ 1 to...

60VQT4C31
≥To return to auto setting, select   or press the iA/MANUAL button.
∫ To set the White Balance manually
1Press  2/1 to select  , and fill the screen 
with a white subject.
2Press  3 to set.
≥ When the   display stops flashing and then lights 
constantly, the setting is complete.
≥ If the   display continues flashing, the White 
Balance cannot be set. In this case, use other White 
Balance Modes.
≥If you turn on the unit with the lens cove r closed, the Auto White Balance will not be 
performed...