Panasonic Hc V10 Owners Manual

31VQT4C31
The card and built-in memory can be selected separately to record motion pictures or still 
pictures.
1Change the mode to  .
2Select the menu. ( l40)
3Select the media for recording the motion pictures and the media for 
recording the still pictures using  3/4/ 2/1, and press the ENTER 
button.
≥ The media is selected separately to motion pictures or still pictures is highlighted in yellow.
≥ Select   and press the ENTER button to return  to the previous screen. (settings will not 
be changed)...

32VQT4C31
≥Open the lens cover before turning on the unit. ( l18)
1Change the mode to   and 
open the LCD monitor.
2Press the recording start/stop 
button to start recording.
A When you begin recording,  ; changes to ¥.
3Press the recording start/stop button again to pause recording.
∫ About the screen indications in the motion picture recording
Basic
Recording motion pictures
Recording mode
R 1h20m Approximate remaining recordable time
≥
When the remaining time is less than 
1 minute, R 0h00m flashes...

33VQT4C31
≥The images recorded between pressing the recording start/stop button to start recording 
and pressing it again to pause recording become one scene.
The scenes longer than approximately 20 minutes will be automatically divided. (Recording 
will continue.)
≥ Screen will pause momentarily when the recording is paused.
≥ (Maximum recordable scenes on a single SD card or built-in memory)
Recordable scenes : Approx. 89100
Different dates ( l66) : Approx. 900
≥ Maximum number of recordable scenes and...

34VQT4C31
≥Open the lens cover before turning on the unit. ( l18)
1Change the mode to   and 
open the LCD monitor.
2Press the   button.
∫ About the screen indications in Still Picture Recording
≥During motion picture recording or when set to PRE-REC, you cannot record still pictures.
≥ Using a tripod is recommended when recording still pictures in dark places because the 
shutter speed becomes slow.
≥ To print a picture, save the picture to the SD card ( l77) and print using a PC or a printer.
≥ The...

35VQT4C31
The following modes (appropriate for the condition) are set just by pointing the unit to what 
you want to record.
≥ Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight and Low light mode, the face will be surrounded by white frame 
when detected. In the Portrait mode, a subject that is bigger and close to center of the 
screen will be surrounded  by an orange frame. (l56)
≥ Faces cannot be detected depending on the recording conditions,...

36VQT4C31
∫Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate 
and automatically adjust the color balance and focusing.
Depending on the brightness of the subject, etc., the aperture and shutter speed are 
automatically adjusted for optimum brightness.
≥Color balance and focus may not be adjusted automatically depending on light sources or 
scenes. If so, manually adjust these settings. ( l59, 62)
Automatic White BalanceThe illustration shows the...

37VQT4C31
1Change the mode to  .
2Select the play mode select 
icon A using  3/4/ 2 and 
press the ENTER button.
3
Select the [VIDEO/PICTURE] you wish to play back, then press the 
ENTER button.
/
Select the [MEDIA] and [VIDEO/PICTURE] you wish to play back, 
then press the ENTER button.
≥ Press the MENU button.
≥ When a video item is selected, an icon will appear on the thumbnail display. ( , 
,)
4Select the scene or the still 
picture to be played back using 
3/4/2/1, then press the 
ENTER button.
≥...

38VQT4C31
5Select the operation icon using 
3/4/2/1.
B Operation icon
≥ Press the ENTER button to display/not-display 
the operation icon.
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the following order if the 
zoom lever is operated to   side or   side.
20 scenes  () 9 scenes ()  1 scene
≥ 9 scenes display returns if the unit is turned off or the mode is 
changed.
∫ Speaker volume adjustment
Operate the volume lever to adjust the 
speaker volume...

39VQT4C31
Motion picture compatibility≥The unit conforms to the MP4 format (MPEG-4 AVC file standard).
≥ Motion pictures recorded on other MP4-compatible equipment may not play back 
normally or may not play back at all on this unit. Similarly, motion pictures recorded on 
this unit may not play back normally or may not play back at all on other MP4-
compatible equipment. (  is displayed for videos that cannot be played back with 
this unit)
Still picture compatibility≥This unit is compliant with the...

40VQT4C31
1Press the MENU button.
2Press 3/4/2/1 to select the 
top menu  A, then press the 
ENTER button.
3Select the submenu B using 
3/ 4 and press  1 or press the 
ENTER button.
4Select the desired item using 
3/ 4, and press the ENTER 
button to set.
To get back to the previous screenPress  2 of the cursor button.
To exit the menu screenPress the MENU button.
∫ About the information display
Descriptions of the selected submenus and 
items displayed in Steps 3 and 4, and 
messages to confirm settings...