Panasonic Hc V10 Owners Manual

41VQT4C31
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
The screen display can be changed to [ON] (all information displayed) or [OFF] (a portion of 
information displayed).
Please refer to page 74.
Please refer to page 29.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Select [SET WORLD TIME] and press the ENTER button.≥If the clock is not set, adjust the clock...

42VQT4C31
5(Only when setting the region of your 
travel destination)
Select your travel destination 
using 
2/1 and press the 
ENTER button.
≥ Press  3 to set daylight saving time. 
 appears and the summer 
time setting is turned on. The travel 
destination time and time difference 
from the home region time are set 
forward by one hour. Press  3 again 
to return to the normal time setting.
≥ Close the setting by pressing the 
MENU button.   appears and the 
time of the travel destination is indicated....

43VQT4C31
When about 30 minutes have passed without any operation while connecting AC adaptor 
with this unit, this unit automatically turns off.
≥This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in 
following cases:
jUsing the USB cable for PC etc.
j PRE-REC is used
j During playback of the slide show
This unit is put into recording pause approx. 0.8 seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby Mode about 60% of the power used in Recording...

44VQT4C31
Starting and stopping of recording and unit on/off can be confirmed with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l95)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect  the images actually recorded.
≥When the AC adaptor is in use, the LCD monitor is set to   automatically.
≥ When the LCD monitor is bright, the recordable time with the battery will be shorter.
It adjusts...

45VQT4C31
Set to [YES] for changing the menu settings back to the default condition.
(Only when the mode is at the   position)
≥Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not be changed.
* For users who have  , this menu is not displayed.
Please be aware that if a medium is formatted,  then all the data recorded on the medium will 
be erased and cannot be restored. Back up important data on a PC, disc etc. ( l80)
≥ When formatting is complete, press MENU button to exit the message...

46VQT4C31
The used space and remaining recordable time of the SD card can be checked.
≥When the mode switch is set to  , remaining recordable time for the selected recording 
mode is displayed.
≥ Press the MENU button to close the indication.
≥The SD card requires some space to store information and manage system files, so the 
actual usable space is slightly less than the indicated value. The usable space is generally 
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software...

47VQT4C31
This item is used to start the unit demonstration.
(Only when the mode is at the   position)
If [DEMO MODE] is switched to [ON] and you press the MENU button when there is no SD 
card inserted and while this unit is connected to the AC adaptor, the demonstration 
automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take 
place for approx. 5 minutes, the demonstration automatically starts again. To stop the 
demonstration, set [DEMO MODE] to...

48VQT4C31
¬Change the mode to  .
A Zoom bar
≥ The zoom speed varies depending on the range over which the zoom lever is moved.
≥ Maximum zoom magnification can be set with [D.ZOOM]. ( l55)
∫ About Zoom bar
Zoom bar is displayed during the zoom operation.
≥If you take your finger off the zoom lever during zoom operation, the operation sound may 
be recorded. When returning the zoom lever to the original position, move it quietly.
≥ When the zoom magnification is 70 k, the subjects are focused at about 1.5...

49VQT4C31
Optical image stabilizer can stabilize the image without decreasing the image quality as 
much.
¬Change the mode to  .
≥Stabilization may not be possible under strong shaking conditions.
Advanced (Recording)
Optical image stabilizer function
Optical image stabilizer buttonPress the button to turn optical image stabilizer on/off. 
 (On) # setting canceled
≥ When you wish to record as you walk, we recommend 
turning the optical image stabilizer on.
≥ When recording with a tripod, we recommend...

50VQT4C31
Select the operation icons to add different effects to the images to be recorded.¬Change the mode to  .
1Press the ENTER button to 
display the operation icons on 
the screen.
≥The indication changes each time you 
press  4 of the cursor button.
≥  Press the ENTER button to display/not-
display the operation icon.
2(e.g. Backlight Compensation)
Select an operation icon.
≥Select the operation icon again to cancel 
the function.
≥ Refer to the respective pages for 
canceling the following...