Home > Panasonic > Automobile Electronics > Panasonic Hands Free Kit Cy Bt200u Operating Instructions

Panasonic Hands Free Kit Cy Bt200u Operating Instructions

Here you can view all the pages of manual Panasonic Hands Free Kit Cy Bt200u Operating Instructions. The Panasonic manuals for Automobile Electronics are available online for free. You can easily download all the documents as PDF.

Page 31

English
31
ProblemPossible causeaPossible solution
The voice quality of
hands-free is low
(Distortion, noise etc.).
There is another wireless device near the unit.
●Switch off the wireless device or keep it away from these Hands Free Kit with
Audio Streaming featuring Bluetooth®technology.
The distance between CY-BT200U (this unit) and the mobile phone is too long or too
short.
●Keep a proper distance between CY-BT200U (this unit) and the mobile phone.
The reception condition of the mobile phone is poor,...

Page 32

32
Troubleshooting (continued)
A call-back call
cannot be made.
Some mobile phones do not send Bluetooth data even if incoming calls are indicated on
the screen of your mobile phone. 
●A call-back call cannot be made.
The calling party activates the caller ID blocking function.
●A call-back call cannot be made.
An international call was received.
●A call-back call may not be made internationally depending on a contract with the
mobile phone company. Check the contract.
ProblemPossible causeaPossible...

Page 33

English
33
ProblemPossible causeaPossible solution
The CY-BT200U (this
unit) is inoperable.
The Switch Unit is disconnected.
●Connect the Switch Unit securely and properly.
The power of the Head unit is set to off.
●Turn on the power of the Head unit.
For other than the above
●Turn on and off the power of the Head unit.
●Toggle the ignition switch between ACC ON and ACC OFF of the car, or turn on and
off the mobile phone.
Audio output comes
out of the mobile
phone after
reconnection.For some mobile phone...

Page 34

34
Specifications
Power supply : DC 12 V (11 – 16 V), test voltage 14.4 V, negative ground 
(Supplied from a head unit or a Expansion Module)
Current consumption : Less than 1.0 A
Communication Frequency : 2,402 MHz – 2,480 MHz
Number of channels : 79 channels
Channel width : 1.0 MHz
Communication mode : Frequency hopped spread spectrum communication
RF output : –1 dBm (0.8 mW)
Service area : Within 10 m
Applicable Bluetooth version : Ver. 1.2
Supported profile : HFP (Hands-Free Profile), OPP (Object...

Page 35

English
35
FCC ID:ACJ932CY-BT100U
Canada: License No
IC: 216J-CYBT100U
Note: 
¡Specifications and design are subject to modification without notice due to improvements.
¡Some figures and illustrations in this manual may be different from your product. 

Page 36

YFM264C099ZA            PTW1107-0138       Printed in Taiwan
©2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved
Panasonic Consumer
Electronics Company,
Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Panasonic Puerto
Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler...
Start reading Panasonic Hands Free Kit Cy Bt200u Operating Instructions

Related Manuals for Panasonic Hands Free Kit Cy Bt200u Operating Instructions

All Panasonic manuals