Panasonic Electronic Board UB-T780 Operating Instructions

Set the Proper Resolution
•
Set your computer's and projector's resolutions to
the most appropriate setting.
If the resolution is not set properly, the image
 will be
difficult to see. Particularly, if the projector's
resolution is lower than the computer's, thin lines
can appear cut or broken. Refer to your projector's
documentation for information on adjusting the
resolution.
Do Not Look Directly into the Projector Lamp
• When using a projector, try to avoid looking directly
into...

Starting the elite Pana-
board software and Per-
forming Calibration
1.
Turn on the elite Panaboard.
2. Connect the elite Panaboard to your computer
with the USB cable.
•The elite Panaboard software starts
automatically.
• When you start the elite Panaboard software for
the first
 time, the calibration screen is displayed.
• Restart your computer if you are prompted to do
so. After the computer has restarted, connect
the elite Panaboard to your computer with the
USB cable.
3. Perform calibration.
4....

Note
•For detailed information about using the
elite Panaboard software, refer to the
included electronic manual or the help. For
instructions on viewing the electronic
documentation "Operating Instructions (For
Software)", see "Viewing the Electronic
Documentation" (page 22).
Exiting the elite Panaboard software
Right-click on the   icon in the notification area, and
select [Exit] from the menu. Uninstalling the elite
Panaboard software
If it is necessary to uninstall the elite...

Viewing the Electronic
Documentation
Follow the procedure below to view the electronic
documentation "Operating Instructions (For Software)".
1.
Turn on your computer and start Windows.
2. Open "Operating Instructions (For Software)"
from the Start menu.
([Start]  ® [All Programs]  ® [Panasonic]  ® [elite
Panaboard] 
® [Operating Instructions for
Software])
• The electronic documentation will be displayed. Note
•To view the electronic documentation, you
must have Adobe ®
 Reader ®...

Daily Care
When cleaning the elite Panaboard or inside the elite  Panaboard, make sure to switch off the power and unplug
the power cord from the AC outlet.
Cleaning the elite Panaboard Gently wipe the elite Panaboard with a soft, moist cloth.
Notice
•For spots that are difficult to remove, use
commercially available white-board cleaner or
neutral household cleaner diluted with water.
• The elite Panaboard is designed exclusively for
projector images. If you write on the screen
board with a white-board...

Replacing the Penpoint of the
Electronic Pen
As the penpoint of the electronic pen becomes worn,
 a
hole will appear in the penpoint. Continuing to use the
electronic pen in this condition can cause damage to
the screen or unsatisfactory operation, so replace the
penpoint with a new one. 24 Operating Instructions (For Basic Operations)
Appendix  

Troubleshooting
When you think there may be a problem, follow the steps in the table below. If the problem persists, contact
your dealer.
Symptom Possible cause and solution See page
The LEDs do not light when
the power switch is turned
on. Check that the power cord is properly plugged in.
→
If the problem persists, turn off the power, and then turn it on
again. –
Red LED is blinking. Turn off the power, and turn it on again.
→
If the problem persists, contact your dealer. –
The computer does not rec-...

Symptom Possible cause and solution See page
The message "The pen bat-
tery is low. Replace the bat-
tery soon." is displayed on
the computer screen.
Replace the electronic pen's battery with a new one. 14
23
Marks written with a white-
board marker cannot be
erased. Because the elite Panaboard is designed exclusively for projector
images, you cannot erase the marks with a standard eraser.
→
Use a commercially available melamine foam eraser to erase. 23
26 Operating Instructions (For Basic...

Specifications
Model Number UB-T780
General Power AC 100 V–240 V, 50 Hz/60 Hz
Power Consumption: During
Operation 0.1 A
External Dimensions: Height ×
Width × Depth 1340 mm × 1752 mm × 89 mm
(4 ft. 4 
7
/8 in. × 5 ft. 9  1
/8 in. × 3  1
/2 in.) Weight 26 kg (57.32 lbs)
Operating Environment Temperature: 15 °C to 30 °C (59 °F to 86 °F)
Humidity: 30 % to 80 %
Storage Environment Temperature: -20 °C to 40 °C (-4 °F to 104 °F)
Humidity: 15 % to 80 %
Interface USB 2.0
Input Unit Screen Board Size: Height ×...

Optional Devices and Accessories
Optional Device Stand KX-B061
Accessories Electronic Pen UE-608025
•
To purchase separately sold items, contact your dealer. 28 Operating Instructions (For Basic Operations)
Appendix