Panasonic Electronic Board Ub-8325 Operating Instructions

							Specifications
81
Help
Specifications
Model No.UB-8325
GeneralPower supply Refer to the name plate on the printer
Power consumption
(Operational)Refer to the name plate on the printer
External dimensions 
(Height × Width × Depth, 
without stand)1,388 mm × 1,550 mm × 264 mm 
(4 6 
21/32 × 5 1 1/32 × 10  13/32 )
Mass (without stand) 34.0 kg (75 lbs.)
Ambient operating conditions Interactive Function
Temperature: 15–30°C (59–86
°F)
Humidity: 30–80% RH
Other than Interactive Function
Temperature: 10–35°C (50–95
°F)
Humidity: 30–80% RH
Ambient storage conditions Temperature: -20–60°C (-4–140
°F)
Humidity: 15–80% RH
Writing implements
Dry erase felt-tipped markers (black, red, blue and green *)
* The green marker is only for the interactive function.
PC interface Full Speed USB 2.0 *
*This electronic board does not function with Hi-Speed 
USB 2.0.
Input 
BlockPanel dimensions 
(Height × Width)900 mm × 1,400 mm (2 117/16 × 4 71/8 )
[1664 mm (65 1/2) diagonal]
Panel surfaces 2 screens
Panel advance system Endless scroll type
Copying area (Height × Width) 850 mm × 1,330 mm (2 9
15/32 × 4 43/8 )
Scanning system Image sensors
Scanning resolution (Height × Width)A4: 1.6 x 1.7 dots/mm (40 x 43 dots/inch)
Letter: 1.7 x 1.6 dots/mm (43 x 40 dots/inch)
Output 
BlockPrinting system Fusion thermal transfer type
Printing resolution 8 dots/mm (203 dots/inch)
Copy paper Standard or recycled paper [60 – 90 g/m
2 (16 - 24 lb.)]
Copy paper size A4 / Letter*
1
Copy color Black
Contrast adjustment Two levels: Normal/Dark
2-screen compressed copying Yes
Time required for copying 15 s/sheet
Continuous copies 1 to 9 sheets
Paper empty indication Yes 
						

							Specifications
82
*1Letter size is for U.S.A. and Canada models.
•The markers (big) and the eraser are used for other than the interactive function.
•The markers for interactive (small) are used while inserted in the pen holder.
The Electronic Pen [a marker for interactive (small) inserted in the pen holder] and the Electronic Eraser are used 
with the interactive function.
Interactive 
FunctionEffective Area
(Height x Width)Projector mode: 850 x 1,330 mm (2 915/32 × 4 43/8 )
* The position cannot be detected within 50 mm (2”) of the 
upper screen border.
Whiteboard mode: 825 x 1,330 mm (2 815/32 × 4 43/8 )
* The whiteboard cannot not be written on within 50 mm 
(2
 ) of the upper screen border and 25 mm (1 ) of the 
lower screen border.
* It is not always possible to normally detect the position 
within 100 mm (3 15/16 ) of the position receiver and
35 mm (1 3/8 ) from the both sides of the screen.
Battery for Electronic Pen or 
Electronic EraserLR03 (AAA size)  x 2
*Alkaline battery
Battery Longevity for Electronic Pen 
or Electronic Eraser48 hours [Continuously at 25°C (77
°F)]
* When using Panasonic “LR03 (AAA size)” alkaline batteries.
Optional and Separately Available Items
OptionStand: KX-BP065
Wall-mounting kit: KX-B063
Separately
Available 
ItemsReplacement film:  UG-6001 (Set of 2 rolls [50 m (164 )])
Markers (big):  KX-B031 (set of 10 black markers), 
KX-B032 (set of 10 red markers), 
KX-B033 (set of 10 blue markers)
Erasers:  KX-B042 (set of 6 erasers)
Marker (big) and eraser set:  KX-B035 (contains one black, one red, and one blue markers and 
one eraser)
For Interactive Pen holder:
Electronic Eraser:
Marker (small) set:
Eraser cloth
(for Electronic Eraser):KX-BP038
KX-BP048
KX-BP0385 (contains one black, one red, one 
blue and one green markers)
KX-BP0481 (set of 10 cloths) 
						

							83
Before installing this set, please read this manual completely.
CLASS 1 LED PRODUCT
Installation
Installation Manual
(for qualified service personnel)
Table of Contents
page
For Your Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
●Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  84
Assembling the Electronic Board . . . . . . . . . . . . . . . . . . . . . . . 85
●Accessories for assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  85
●Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  86
Electronic Board Operations Check . . . . . . . . . . . . . . . . . . . . . 89
●Interactive Operations Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  90
Repacking  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Assembling the Optional Stand (KX-BP065) . . . . . . . . . . . . . . 92
●Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  92
●Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93
Optional Wall-mounting Kit (KX-B063). . . . . . . . . . . . . . . . . . . 96
●Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  96
●Wall-mounting procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97
●Attaching the wall-mounting fixtures. . . . . . . . . . . . . . . . . . . . . . . . .  98 
						

							84
For Your Safety
To prevent severe injury and loss of life, read this 
section carefully before using the unit to ensure proper 
and safe operation of your unit.
The following graphic symbols are used in this 
Installation Manual.
Safety check must be done by qualified 
service personnel after installing this option.
Be sure to disconnect the power cord while 
installing the unit. Otherwise, it may cause 
electric shock or injury.
Be sure to use the specified parts for the 
installation. Otherwise, it may cause fire, 
electric shock or injury.
Notes in the operating instructions or notes 
of labels on the cabinet, chassis or parts 
should be observed.Do not install the unit except by a qualified 
service personnel.
After installing or moving the electronic 
board, lock the casters and set the fall-
prevention extension legs.
If the unit is hung on a wall, confirm the wall 
must be capable of supporting at least the 
following weight.
1,005 N [103 kgf (227 lbs.)]
Do not attach the electronic board to 
mortared walls. Accidental electric leakage 
from the wall-mounting fixture bolts to metal 
laths or wire laths can cause heat, smoke or 
a fire.
Confirm the bolts of the unit are certainly 
caught by the wall-mounting fixtures by 
pulling the unit after hanging the unit on the 
wall-mounting fixtures if the unit is mounted 
on a wall.
Be sure to put on a glove to avoid electric 
shock or injury. Denotes a potential 
hazard that could 
result in serious 
injury or death.
Denotes hazards 
that could result in 
minor injury or 
damage to the unit.
This symbol is used to alert 
operators to a specific operating 
procedure that must not be 
performed.
These symbols are used to alert 
operators to a specific operating 
procedure that must be emphasized 
in order to operate the unit safely.
Notice
WARNING
CAUTION
WARNING
CAUTION
Locking the casters
(Push this side)
Push to lock 
						

							85
Installation
Assembling the Electronic Board
■Accessories for assembling
The package includes the parts for setting up the electronic board shown below. Make sure that all of these parts 
are included in the package before proceeding.
No.Part NameIllustrationQ’tyRemarks
Power cord1
Wall-mounting 
template1 For wall-mounting 
						

							Assembling the Electronic Board
86
■Assembly
1Assemble the optional stand or wall-mounting kit.
■If you are using a stand, refer to page 92.
■If you are using a wall-mounting kit, refer to page 96.
2Remove the electronic board from the shipping box.
Remove the joints, then remove the electronic board from the shipping box.
•Do not touch the screen film surface, as this may damage it.
•The shipping box, cushioning material, and other packing material will be necessary if you ever need to 
repackage the electronic board, so do not throw them away.
Manuals, CD-ROM, 
Eraser cloth (for Electronic Eraser)
Markers for Interactive
Batteries (6 pcs)Pen holder (2 pcs)
Electronic Eraser Eraser
USB cable Power cordMarkers
Joints
JointsElectronic board
Thermal transfer film
[Contents of Accessory Box] Shipping box
Shipping box
Caution 
						

							Assembling the Electronic Board
87
Installation
3Install the electronic board.
Install the electronic board using the stand (option) 
or wall-mounting kit (option). 
■Using the stand (option)
1) Hang the electronic board on the optional 
stand.
•The electronic board can be mounted 
200 mm (7 
7/8”) higher than hang position A 
by hanging it with the wing bolts B.
2) Secure the stand fixture to the electronic 
board using the two wing-bolts [M5 x 12 mm 
(15/32”)] provided with the stand (option).
■Using the wall-mounting kit (option)
1) Hang the electronic board on the optional 
wall-mounting fixtures.
2) Secure the wall-mounting fixture to the 
electronic board using the two wing-bolts 
[M5 x 12 mm (15/32”)] provided with the wall-
mounting kit (option).
•When mounting the electronic board, avoid banging 
it. Such impact may break the internal light or cause 
other damage.
•After mounting the electronic board, gradually apply 
weight to it to make sure that the wall is strong 
enough to support it.
A
B
Caution 
						

							Assembling the Electronic Board
88
4Connect the power cord.
1) Securely fit the supplied power cord into the 
AC inlet on the printer unit.
2) Fasten the power cord through the center 
cable holder, as well as the left or right cable 
holder depending on the location of the AC 
outlet (see below).
•Left Location
When fastening through the left cable holder, 
fasten the power cord through the cable 
holders as shown below:
•Right Location
When fastening through the right cable holder, 
fasten the power cord through the cable 
holders as shown below:
5Wipe the screen film surface.
Soak a soft cloth with water, wring well, and 
wipe the screen film surface.
•Do not wipe the screen film surface with paint 
thinner, benzene, or cleaners that contain abrasives. 
Doing so may cause discoloration.
•Do not wipe the screen film surface with a dry cloth. 
Doing so may create static electricity.
6Check operations.
Refer to “Electronic Board Operations Check” 
on page 89.
Caution 
						

							89
Installation
Electronic Board Operations Check
After assembling the electronic board, perform the procedures presented in the following table to make sure it 
functions properly.
StepPoints to Check
SymptomSolutions
1Turn on the power switch.“ ” flashes after “ ” lights up. (Normal operation)
(If not) Check power cord. (See step 
4 on page 88.)
2Open the printer door and attach the 
accessory thermal transfer film, then 
close the printer door.
•Installing Thermal Transfer Film 
procedure (refer to the Operating 
Instructions on page 18)
“ ” flashes. (Normal operation)
(If not) Check thermal transfer film.
3Open the paper cover and insert 
ordinary A4 (Letter) test paper, then 
close the paper cover.
•Loading Copy Paper procedure 
(refer to the Operating 
Instructions on page 19)“ ” lights up. (Normal operation)
(If not) Check copy paper.
4Open the printer door.“ ” flashes. (Normal operation)
(If not)
*1
5Close the printer door.“ ” lights up. (Normal operation)
(If not)
*1
6Press .Screen is fed. (Normal operation)
The screen film surface is not fed 
smoothly.
*1
There are strange noises.
7Use the accessory marker to draw 
a large   filling the entire 
copyable area of the screen film 
surface.
•Copyable area (refer to the 
Operating Instructions on page 
11 )
Press  twice.
Press .“ ” lights up and three copies are 
made.(Normal operation)
Three copies are not made.
*1
The entire readable area is not 
printed.
There are strange noises or paper 
jams during the copying process.
Multiple sheets of paper are fed 
through at the same time.
8Press   to move the screen 
film surface. Write letters, etc. with 
the marker.
Press  once.
Press .The Contrast/Remaining Film 
indicator light is turned on and one 
copy is made.(Normal operation)
The Contrast/Remaining Film 
indicator light is not turned on.*1
The image is not copied properly.
There are strange markings on the 
copy sheet 
(e.g., stripes or lines).
9Press  once.The Contrast/Remaining Film 
indicator light is turned off.(Normal operation)
(If not)
*1 
						

							Electronic Board Operations Check
90
*1Contact the store or dealer from which the unit was purchased.
■Interactive Operations Check
1Install the software on the computer and connect the supplied USB cable according 
to “Installing Drivers / Interactive Panaboard Software” on page 28.
2Check that the interactive function operates.
•If the Electronic Pen position shifts, adjust the position according to the instructions on page 36.
10Press .Two screens are copied 
properly.(Normal operation)
(If not)
*1
StepPoints to Check
SymptomSolutions