Panasonic Electronic Board UB-2815C, UB-2315C Operating Instructions

Daily Care and Maintenance
31
Help
When the clock battery has been drained, the time set-
up screen is displayed each time the unit’s power is 
turned on.
Replace the battery as follows and set the current time 
(see page 20).
1
Loosen the screw attached to the lower side of 
the Control Panel 1, then remove the battery 
holder 2.
•Do not loosen any other screws.
2
Remove the old battery and install the new one 
with the positive (“+”) terminal upward.
•Always use “CR2032” batteries and be sure 
that the...

Troubleshooting
32
To identify error message that are displayed on the control panel, refer to “Error Codes” on page 34.
The following table lists solutions to problems that you may have concerning this unit as well as tips in avoiding 
these problems in the future.
If problems still persist, call your dealer.
Troubleshooting
IssueSolution and CareSee 
Page
The power switch is on but the 
display is off.Confirm that the power plug is securely plugged in.
(If the display still does not light, turn the...

Troubleshooting
33
Help
Printed images are thin or blank. Perform the Test Print feature.
If the problem still occurs: 
•The ink of the print cartridge is empty.
Change the print cartridge with a new one referring to the 
manual of the printer.
•The nozzle of the print cartridge is dirty.
Clean the nozzle according to the manual of the printer.21
When the scanned image is 
printed, colors are shifted or 
blurred.Adjust the alignment of the printer according to the manual of the 
printer. –
When the...

Troubleshooting
34
The following table describes the meaning of each error code which may appear on the display.
Error Codes
Error CodeCauseRemedySee 
Page
U307035Write-protection is set on the USB 
flash memory device.Cancel the write-protection.
–
U306035Write-protection is set on the SD 
memory card.Cancel the write-protection.
–
U307014
U307160
U407035The following folders for storing 
images on the USB flash memory 
device are set to “read only”:
for UB-2815C: “UB-2815C”
for UB-2315C:...

Troubleshooting
35
Help
If other indications appear, call your dealer.U308002There is no paper in the printer. Add paper to the printer.
Depending on the printer, it may be 
necessary to press the error 
cancellation button (ex. OK) on the 
printer after fixing the printer error. 
Refer to the manual of the printer for 
details.–
U308003
U308004There is a printer error. Fix the printer error according to the 
printer manual.–
U308001 Unsupported printer is connected. Connect compatible printer. 37...

Specifications
36
Specifications
Model No.UB-2815CUB-2315C
GeneralPower supply Refer to the name plate backside of the Control Box
Power consumption Refer to the name plate backside of the Control Box
External dimensions 
(Height × Width × Depth)1,858 mm × 2,014 mm × 1,207 mm 
(6 1 
5/32 × 6 7 5/16 × 3 11  17/32 )1,858 mm × 1,534 mm × 1,207 mm 
(6 1 5/32 × 5 13/32 × 3 11  17/32 )
Mass 39 kg (86 lbs.) 33 kg (73 lbs.)
Ambient operating 
conditionsTemperature: 10–30°C (50–86
°F)
Humidity: 30–80% RH
Ambient...

Specifications
37
Help
Scanning resolution
(Height x Width)[Standard-size, A4]
Color-Fine: 1.8 x 1.8 dot/mm
(45 x 45 dpi)
Color-Standard: 1.8 x 0.9 dot/mm
(45 x 22 dpi)
B/W: 1.8 x 1.8 dot/mm
(45 x 45 dpi)
[Standard-size, Letter]
Color-Fine: 1.6 x 1.6 dot/mm
(42 x 42 dpi)
Color-Standard: 1.6 x 0.8 dot/mm
(42 x 21 dpi)
B/W: 1.6 x 1.6 dot/mm
(42 x 42 dpi)
[Full-size, A4]
Color-Fine: 2.5 x 1.8 dot/mm
(63 x 45 dpi)
Color-Standard: 2.5 x 0.9 dot/mm
(63 x 22 dpi)
B/W: 2.5 x 1.8 dot/mm
(63 x 45 dpi)
[Full-size,...

Specifications
38
*1For information regarding available USB flash memory devices, SD memory cards, and printers, refer to the 
following site:
http://panasonic.co.jp/pcc/products/en/eboard/ub-2815c_info.htm
*
2Letter size is for U.S.A. and Canada models.
*3If an SD memory card has been formatted (ex. by the general formatting software of a computer), it oftentimes 
cannot be recognized by this unit.  
To use the SD memory card with this unit, it must be reformatted to comply with SD memory card...

39
Before installing this set, please read this manual completely.
CLASS 1 LED PRODUCT
Installation
Installation Manual
(for qualified service personnel)
Table of Contents
page
For Your Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Assembling the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
●Accessories for assembling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
●Assembly  . . . . . . . . . . . . . . . . . . . . . . ....

40
For Your Safety
To prevent severe injury and loss of life, read this 
section carefully before using the unit to ensure proper 
and safe operation of your unit.
The following graphic symbols are used in this 
Installation Manual.
Safety check must be done by qualified 
service personnel after installing this unit.
Be sure to disconnect the power cord while 
installing the unit. Otherwise, it may cause 
electric shock or injury.
Be sure to use the specified parts for the 
installation. Otherwise, it...