Panasonic Electronic Board UB-2815C, UB-2315C Operating Instructions

Setting the Unit
21
Using
By performing the Test Print feature, it is possible to 
clean the printer head from this unit when scanned 
images are not printed correctly (ex. certain areas 
appear blank).
Once the printer head is cleaned, the following pattern 
will be printed.
If the pattern is printed as shown below, the problem 
has been fixed. If the pattern is not printed as shown 
below, refer to the manual of the printer for details.
Note
•This item is only be displayed when an external 
printer is...

Computer Interfacing
22
Drivers and software must be installed in your 
computer to use the computer interfacing function.
*1This unit does not function with Hi-Speed USB 2.0. 
Even if using a computer equipped with Hi-Speed USB 
2.0, this unit functions with Full Speed USB 2.0.
(This unit will not run at the rated speed of Hi-Speed 
USB 2.0.)
*
2Microsoft® Windows® 2000 operating system 
(hereafter Windows 2000)
*
3Microsoft® Windows® XP operating system 
(hereafter Windows XP)
The provided CD-ROM...

Computer Interfacing
23
Using
The USB and TWAIN driver and Panaboard Software 
are installed in your computer by following 
procedures.
Note
•Do not yet connect a USB cable to the unit.
1
Power on your computer and start Windows*1.
•Log on as an administrator for 
Windows 2000 
or Windows XP.
*
1Microsoft® Windows® operating system 
(hereafter Windows)
2
Insert the CD-ROM into the CD-ROM drive. 
The Setup window appears automatically.
•Depending on the operating system or the 
settings that you are...

Computer Interfacing
24
8
When the following window appears after files 
are copied, power the unit on, and connect the 
USB cable to your computer.
9
Follow the on-screen instructions if the wizard 
windows appear.
•If the wizard window is displayed to connect 
to the Windows Update in Windows XP SP2, 
select [No].
•If the warning window is displayed in 
Windows 2000 / Windows XP, select [Yes] or 
[Continue Anyway] to continue the 
installation.
10
When the installation is completed, click [OK]. 

Computer Interfacing
25
Using
1
Power on your computer and start Windows.
•Log on as an administrator for 
Windows 2000 or Windows XP.
2
Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
•Depending on the operating system or the 
settings that you are using, the Setup 
window may not appear automatically. 
In such a case, double-click “Menu.exe” in 
the CD-ROM from “My Computer”.
3
When “Welcome” window appears, click 
[Next].
4
Click [Panasonic-DMS].
•To install the USB...

Computer Interfacing
26
If you need to remove the USB and TWAIN driver and 
Panaboard Software, perform the following steps.
1
Power on your computer and start Windows.
•Log on as an administrator for 
Windows 2000 or Windows XP.
2
Click [Start], and then click Control Panel in 
Settings.
•For Windows
 XP, click [Start], and then click 
Control Panel.
3
Double-click Add / Remove Programs icon 
(Windows XP: Add or Remove Programs) in 
the Control Panel.
4
Select Panaboard UB-2 Software in the Add 
/...

Computer Interfacing
27
Using
By using Panasonic-DMS, it is possible to scan 
handwritten text/diagrams or attached documents.
1
Click [Start] and select Programs–
Panasonic–Panasonic Document 
Management System–Document Manager.
(For Windows XP, All Programs is displayed 
instead of Programs.)
2
Click the File menu, then click Select 
Source....
3
Select Panaboard UB-2 Series and click 
[Select].
4
Click the File menu, then click Acquire 
Image..., or click the (scanner) icon on the 
Toolbar.
•The...

Computer Interfacing
28
Panaboard Operation Panel
NameDescription
Mode Button
Click to select the scanning mode.
Color-Fine: For scanning in high-resolution color. Recommended for 
scanning color documents.
Color-Standard: For scanning in normal-resolution color. Recommended for 
scanning handwritten text/diagrams written with a color marker.
B/W-Dark: For scanning black and white images to be darker than normal 
density.
B/W-Normal: For scanning black and white images with normal density.
Start Button...

Daily Care and Maintenance
29
Help
P
Always turn off the power switch and unplug the 
power plug when cleaning outside and inside the 
unit.
Gently wipe the whiteboard and unit with a water-
dampened cloth that has been thoroughly wrung.
Note
•If you accidentally write on the whiteboard with an oil-
based marker, wipe with a small amount of ethyl 
alcohol.
•Do not use thinner, benzine or cleaners containing 
abrasives or surfactants, as this may result in 
discoloration or difficulty of erasing.When the...

Daily Care and Maintenance
30
If white lines appear or the image is completely blank, 
clean the white balance area.
1
Move the scanner to the center of the white-
board.
2
Gently wipe both sides of the white balance 
area with a water-dampened cloth that has 
been thoroughly wrung.
Note
•Do not use thinner, benzene, or cleaners 
containing abrasives as this may result in 
discoloration.
3
Move the scanner to the home position.If black lines appear or the image is very dark, clean 
the scanner lens.
1...