Panasonic EB-TX210 EB-TX220 Operating Instructions
Have a look at the manual Panasonic EB-TX210 EB-TX220 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ix Icons Used in This Manual The following icons indicate critical and time-saving information found throughout this manual. Please take special notice of information included with these icons. Caution: Calls attention to information that could prevent you from damaging your phone or putting your own safety at risk. Please be sure to read this information. Note: Information that could have direct impact on how a particular feature or function will operate. Tip: Points out helpful advice and time-saving shortcuts. Memorizing these tips can save you valuable time.
Safety First 1 Safety First Safety First Your new phone is a convenient and effective communications tool, but it can be hazardous when used improperly. To avoid harming yourself or anyone else, please review the following information before using your phone. Batteries Batteries can cause property damage, injury, or burns if the terminals are touched with a conductive material (i.e., metal jewelry, keys, etc.). Therefore, use caution when handling a charged battery. Additional precautions and notes are listed below: 1Never throw a battery into a fire; it may explode. 2Fully recharge the battery if the battery is low or as soon as the low-battery alert beeps. 3Do not drop the battery. 4Do not bridge battery contacts together with metallic objects. 5Do not remove the battery from the phone while the phone is powered on. Settings you have changed may revert to their previous settings. Charging Devices 1Use only Genuine Panasonic charging accessories. Use of attachments not recommended by Panasonic or your wireless service provider may result in fire, electrical shock, or injury. Panasonic is not responsible for damages caused by using non-Panasonic accessories. 2Do not expose charging adapters to moisture, water, or the weather. 3Do not use an adapter with a damaged cord. 4When using a DC adapter in an automobile, a small amount of electricity flows through the adapter, even if the phone is turned off. Remove the plug from the cigarette lighter whenever the phone will be left in the vehicle for long periods of time. The cigarette lighter must have a 12V negative ground socket. Do not use the adapter in a vehicle that has a positive ground system.
Chapter 1 2 Safety First General 1Do not use the phone in extreme temperature or humidity. The specified operating temperature range is -22°F to +140°F (-30°C to +60°C). 2Do not attempt to disassemble the phone. There are no user- serviceable parts inside. 3Do not expose the phone to rain or spill liquids on it. 4Do not carry the phone by holding the antenna. 5Do not use any accessories other than those designed for use with your phone. 6Use of attachments not recommended or sold by your wireless service provider may result in fire, electrical shock, or injury. 7Panasonic cannot be held responsible for damages caused by using non-Panasonic accessories. Availability of Service This phone, like any wireless phone, operates using radio sig- nals, wireless and landline networks, and user-programmed functions. Because of this, connection in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential communications (for example, medical emergencies). When operating in analog mode, the service area where you can place and receive calls will be smaller than with other phones. Emergency (911) Service If you need to make an emergency (911) call, power the phone on, dial 911, and press . If you have stored the numbers 911 in memory location number 9, simply press and hold 9, and the emergency call will be placed. Emergency calls can be made regardless of lock setting. Remember, to make or receive any call, the phone must be switched on and in a service area that has adequate signal strength. Emergency calls might not be possible on all wireless phone networks or when certain network service and/or phone features are in use. Safety Tips Following the suggestions in this section will help ensure safe and efficient operation of your Panasonic phone. This Model Phone Meets The Governments Requirements For Exposure To Radio Waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits
Chapter 1 Safety First 3 for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish per- mitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are conducted using standard operating positions speci- fied by the FCC with the phone transmitting at its highest cer- tified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.49W/kg and when worn on the body, as described in this user guide, is .93W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID NWJ10A002A. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com . * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Chapter 1 4 Safety First All Panasonic branded accessories are tested and comply with FCC RF exposure requirements. Non-Panasonic accessories may not comply. Body-worn operation To maintain compliance with FCC RF exposure guidelines, if you wear your wireless phone on your body while on a voice or data call, always place the phone in a Panasonic supplied or approved carry accessory. Use of non-Panasonic approved accessories may exceed FCC RF exposure guidelines. Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Phone Operation NORMAL POSITION: Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder. FOR EFFICIENT OPERATION: For your phone to operate most efficiently, do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: Give full attention to driving—driving safely is your first responsibility; Use handsfree operation, if available; Pull off the road and park before making or answering a call if driving conditions so require.
Chapter 1 Safety First 5 Electronic Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Pacemakers: The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (6”) or 15 centimeters (15 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations of Wireless Technology Research. Persons with pacemakers: Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON; Should not carry the phone in a breast pocket; Should use the ear opposite the pacemaker to minimize the potential for interference; If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. Hearing Aids: Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider. Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles: RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities: Turn your phone OFF in any facility where posted notices so require.
Chapter 1 6 Safety First Aircraft FCC regulations prohibit using your phone while in the air; switch off your phone before boarding an aircraft unless otherwise advised by airline personnel. Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in other areas posted: “Turn off two-way radio.” Obey all signs and instructions. Potentially Explosive Atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. For Vehicles Equipped with an Air Bag An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in- vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. For U.S. Customers: Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Batterymarch Park, PO Box 9101, Quincy, MA 02269. E-mail address: [email protected] . Web site: www.nfpa.org . Refer to Appendix C for the FDA Consumer Update on Mobile Phones published by the U.S. Food and Drug Administration.
Getting Started 7 Getting Started Getting Started If you are looking at your phone and wondering where to go from here, this is the place to start. This chapter is designed to get you started, and to familiarize you with your phone’s most basic features and functions. Battery Use Your phone’s battery may not be fully charged when you remove it from the box. The battery must be fully charged before using your phone for the first time. Attach and charge the battery as described in this section. Attaching the Battery to an EB-TX210 Series Phone 1 Insert the bottom edge of the battery along the bottom, back edge of phone. 2Push the top of the battery toward the phone until it clicks into place. Attaching the Battery to an EB-TX220 Series Phone 1 Press down on the battery cover. 2Remove the battery cover.
Chapter 2 8 Getting Started 3Slide the battery release latch all the way to the left. 4Insert bottom edge of battery into battery pocket, then lower the top edge of the battery toward the phone until the battery lies flat. 5Slide the battery release latch to the far right until it clicks into place. The battery cover will not slide into place if the latch is incorrectly positioned. 6Slide battery cover onto phone until it clicks into place.