Panasonic Dvd Vhs Home Theater Sound System Sc Ht822 Operating Instructions

31
RQT7708
∫“Display” tab
∫“Others” tab
(Effective when playing multi-channel audio)
For optimum listening with 5.1-channel sound, all the speakers, 
except for the subwoofer, should be the same distance from the 
seating position. If you have to place the center or surround 
speakers closer to the seating position, adjust the delay time to 
make up for the difference.
1 Press [34] to select the delay time box and press [ENTER].
2 Press [34] to adjust the delay time and press [ENTER].If either distance a...

32
RQT7708
Playback
Turn on the television and select the appropriate video input for the VHS.
[Note]
≥Pause stops after 5 minutes. Cue, review and jet search restart to 
play after 10 minutes.
≥The tape moves at high speed during fast-forward, rewind, and jet 
rewind so the unit will make a noise. Also, it takes some time for the 
tape to stop after you press [∫].≥The picture during cue, review, and jet search may be disrupted or 
otherwise affected on some televisions. During jet search at 35 
times...

33
RQT7708
See below for details.
Press [SHIFT]i[PICTURE MODE].
Each time you do this:
STANDARD:for recordings of television program (Factory preset)
DYNAMIC:Clear, vivid pictures for scenery and sports
SOFT:for prerecorded tapes
Press and hold [1] (play) for about five 
seconds.
“R1” appears on the television.
At the end of the program, the tape rewinds to the beginning of the 
program and plays it again. (It only works if there is a five-second 
blank at the end of the program.) This repeats until you...

34
RQT7708
Manual recording
Preparation
Turn on the television and select the video input for the VHS.
See below for details.
1Press [VHS] to put the remote control 
in VHS mode.
2Press [Í] to turn on the unit.
3Press [DVD/VHS] to select “VHS” as 
the source.
4Insert the tape you want to record to.
Ensure its tab is in place (➜page 5).
5Select the channel with the numbered 
buttons, [WCH] or [XCH].
≥To select with the numbered buttons:
e.g. channel 2: [0] ➜ [2]
channel 23: [2] ➜ [3]
channel 123: [100] ➜...

35
RQT7708
You can watch and listen to other content when the unit is in timer 
recording standby or during VHS recording.
∫Television (➜page 18)
1 During recording
Press [TV] to put the remote control in TV mode.
2 Press [TV/VIDEO] then select the channel with the numbered 
buttons, [WCH] or [XCH].
∫DVD (➜page 20)
1 During recording
Press [DVD] to put the remote control in DVD mode.
2 Press [DVD/VHS] to select “DVD/CD”.
3 Insert a disc and start play.
∫Radio (➜page 44)
1 During recording
Press [TUNER]...

36
RQT7708
Timer recording
You can create up to 16 timer recording programs. You can set the timer to record an individual 
program up to a month in advance, record at the same time on the same day every week, or at 
the same time daily.
Preparation
≥Make sure the unit’s clock is correct (➜page 40 to adjust it if necessary).
≥Insert a tape, ensuring its tab is in place (➜page 5).
See below for details.
1While stopped, press [PROG].
The timer-programming screen appears.
2Press [PROG] to select an...

37
RQT7708
∫To check a program
Press [PROG].
The timer-programming screen appears.
∫To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and 
press [ENTER].
2 Select the item with [21] and correct it with [34].
∫To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
The...

38
RQT7708
Finding programs with the Jet Navigator and VHS Index Search System (VISS)
The unit saves the date, channel, time, and category of the recordings you make and shows 
them on the Jet Navigator list, making it easier to find and play them. It can save the data for up 
to 14 recordings on a tape, for 20 different tapes, and for a total of 50 recordings.
See below for details.
1Press [MENU] to display the “VHS 
MENU” screen.
2Press [34] to select “OPTION” menu 
and press [ENTER].
3Press [34] to...

39
RQT7708
Set categories to make it easier to see what kind of programs are in 
the list.
1Press [1] (cursor) while the program 
you want to categorize is highlighted.
2Press [3421] to select a category 
and press [MENU] to confirm and 
return to the previous screen.
To return to the Jet Navigator list
Press [MENU].
[Note]
≥If you have already stored 14 programs on a tape and you then 
store another one, the new item is added and the oldest is deleted.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA”...

40
RQT7708
Changing settings
≥The settings remain intact even if you switch the unit to standby.
See below and the following pages for details
(while VHS MENU is displayed).
Select the language for these menus and other on screen displays.
1Press [34] to select “LANGUAGE” 
and press [ENTER].
2Press [34] to 
choose the 
preferred 
language.
≥ENGLISH (Factory preset)
≥ESPAÑOL
≥FRANÇAIS
Press [MENU] to confirm and return to the previous screen.
The clock is set automatically after Plug-in Auto Tuning (➜page...