Panasonic Dvd Vhs Home Theater Sound System Sc Ht822 Operating Instructions

11
RQT7708
Other speaker setup options (Center speaker only)
∫Attaching to a wall
[Note]
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 Ib.) per screw. 
Consult a qualified building contractor when attaching the speakers to wall. Improper attachment may result in damage to the wall and 
speakers.
≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
1Drive a screw (not included) into a wall.
2Fit...

12
RQT7708
How you set up your speakers can affect the bass and the sound field. Note the following points.
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
≥The front left, right and surround speakers are all the same. 
≥Use only supplied speakers
Using other speakers can damage the unit and sound quality will 
be negatively affected.
≥Set the speakers up on an even surface to...

13
RQT7708
∫Attaching the stickers to the speakers
Attach the speaker-cable stickers to make connection easier.
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
Be sure to connect only positive (copper) wires to positive (i) terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
∫Preventing the speakers from falling over (Front and surround speakers)
[Note]
Consult a qualified building contractor when attaching the speakers...

14
RQT7708
To enjoy cable and satellite television
Connection ➜page 49
Subscribe to a cable or satellite company.If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a 
television, but the picture may be affected with some televisions 
and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the 
problem. If it persists, move the speakers further away from the...

15
RQT7708
∫Connecting a television with COMPONENT VIDEO IN terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive 
output and provide a purer picture than the S-VIDEO OUT 
terminal. Connection using these terminals outputs the color 
difference signals (P
B/CB, PR/CR) and luminance signal (Y) 
separately in order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends 
on the television or monitor...

16
RQT7708
Conserving power
The system consumes a small amount of power, even when it is 
turned off. The amount of power used depends on the display 
setting (➜page 42):
BRIGHT: 3.8 W DIM: 3.5 W OFF: 2.2 W
To save power when the unit is not to be used for a long time, 
unplug it from the household AC outlet.
You will need to reset some memory items after plugging the unit.
STEP5Radio and system connection
AC IN
Y
PB/CBPR/CRCOMPONENT
VIDEO OUTS-VIDEO
OUTLINE
OUTLINE
IN VIDEO
OUT DVD/ 
VHS
VIDEO
IN EXT...

17
RQT7708
After plugging the unit into your household AC outlet and pressing 
[Í] to turn the unit on for the first time, the unit automatically tunes 
in all the channels it can receive and sets the clock.
The unit determines the type of transmission, TV or CATV, as 
follows:
TV: when there are less than 5 CATV channels.
CATV: when there are 5 or more CATV channels.
Preparation
≥Confirm that the antenna is connected correctly.
≥Turn on the television and select the video input for the VHS.
≥Press [VHS]...

18
RQT7708
∫TV maker setting
You can control the television by entering the remote control code.
1Refer the chart below for the code for 
your television.
2Aiming the remote control at the television
While pressing and holding [TV] ( ), 
press the numbered buttons to enter 
the code number.
≥Example: To select 01, press [0] ➜ [1].
≥The remote control outputs the on/off signal. If the code is 
correct, the equipment turns on or off. If it doesn’t, try 
entering another code.
[Note]
≥If your television...

19
RQT7708
Turn on the television and select the video input for the DVD.
The QUICK SETUP screen assists you to make 
necessary settings such as:
≥Menu Language (➜page 31)
≥TV Type (➜page 30)
≥TV Aspect (➜page 30)
1Press [DVD] to put the remote control 
in DVD mode.
2Press [Í] to turn on the unit.
3Press [DVD/VHS] to select “DVD/CD” 
as the source.
4Press [SHIFT]i[SETUP] to show 
QUICK SETUP screen.
5Follow the messages and make the 
settings using [3421] and 
[ENTER].
6Press [ENTER] to finish QUICK...

20
RQT7708
Basic play
Turn on the television and select the appropriate video input for the DVD.
OPEN/CLOSEEJECT DISC CHANGEDISC CHECKINPUT
SELECTORREC
/REW FF/STOP PLAYDOWNUPPHONES
CHVOLUMESTOP DISCDISC
1 2
3 45
 1 2 3 4 5
PLAYPOWERÍ/IVOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL SPEED PROG
SKIPSLOW/SEARCH
MENU
ENTERDIRECT 
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TVFM/AM DVD/VHS
DV D T V
VHSTUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECTJET REW CD MODE
DISC 5
S10ENTER
PLAY 
LIST
TV VOL...