Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions

11
RQT6951
SC-HT790V, SC-HT800V
The front and surround speakers are the same. Use those you 
have connected the short cords to as front speakers and those you 
have connected the long cords to as surround speakers.
[1]Attaching the stickers to the speaker 
cables
Attach the speaker-cable stickers to make connection easier.
[2]Connecting the speakers
Keeping the cables out of the way (SC-HT810V only)
Pass the cables through the holes in the stand to keep them out of 
the way.[Note]
≥Never short-circuit...

12
RQT6951
To enjoy cable and satellite television
Connection ➡page 54
Subscribe to a cable or satellite company.If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a 
television, but the picture may be affected with some televisions 
and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the 
problem. If it persists, move the speakers further away from the...

13
RQT6951
∫Connecting a television with COMPONENT VIDEO terminals
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive 
output and provide a purer picture than the S-VIDEO OUT 
terminal. Connection using these terminals outputs the color 
difference signals (P
B/PR) and luminance signal (Y) separately in 
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends 
on the television or monitor (e.g. Y/P...

14
RQT6951
Conserving power
This unit consumes a small amount of power, even when it is 
turned off. The amount of power used depends on the display 
setting (➡page 44):
BRIGHT: 3.7 W DIM: 3.5 W OFF: 2.4 W
Audio memory backup
To save power when the unit is not to be used for a long time, 
unplug it from the household AC outlet.
Remember to reset the radio stations and any other memory items 
before using the unit again.
Information you enter into the unit’s memory remains intact for up 
to 2 weeks after...

15
RQT6951
After plugging the unit into your household AC outlet and pressing 
[Í] to turn the unit on for the first time, the unit automatically tunes 
in all the channels it can receive and sets the clock.
The unit determines the type of transmission, TV or CATV, as 
follows:
TV: when there are less than 5 CATV channels.
CATV: when there are 5 or more CATV channels.
Preparation
≥Confirm that the antenna is connected correctly.
≥Turn on the television and select the video input for the VCR.
≥Press [VCR]...

16
RQT6951
∫TV maker setting
You can control the television by entering the remote control code.
1Refer the chart below for the code for 
your television.
2Aiming the remote control at the television
While pressing and holding [TV], 
press the numbered buttons to enter 
the code number.
≥Example: To select 01, press [0] ➡ [1].
≥The remote control outputs the on/off signal. If the code is 
correct, the equipment turns on or off. If it doesn’t, try 
entering another code.
[Note]
≥If your television brand...

17
RQT6951
Answer questions in the QUICK SETUP screen to make some 
simple DVD settings. 
Preparation
Turn on the television and select the video input for the DVD.
1Press [DVD] to put the remote control 
in DVD mode.
2Press [Í] to turn on the unit.
3Press [DVD/VCR] to select “DVD” as 
the source.
4Press [SETUP] to show the menus.
5Press [2,1] to select “Others” tab.
6Press [3,4] to select “QUICK 
SETUP” and press [ENTER].
7Press [3,4] to select “Yes” and 
press [ENTER].
8Press [3,4] to select the item...

18
RQT6951
Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]Preparation
Turn on the television and select the video input for the DVD.
1Press [DVD] to put the remote control 
in DVD mode.
2Press [Í] to turn on the unit.
3Press [DVD/VCR] to select “DVD” as 
the source.
The following indicator appears when you select DVD.
4Press [SHIFT]r[OPEN/CLOSE/EJECT] 
to open the disc tray and place the disc.
≥If the disc contains both audio data (WMA and MP3) and 
JPEG, check “Mixed Disc—Audio & Stills”...

19
RQT6951
[DVD-A] [DVD-V] [VCD]
Press [3,4,2,1] to select an item and 
[ENTER] to confirm.
Or, press the numbered buttons.
To select a 2-digit number
e.g. 23: [S10] ➡ [2] ➡ [3].
Press [TOP MENU] to show the top menu.
Press [MENU] to show a menu.
Press [RETURN] to show a menu. [VCD]
[Note]
The disc continues to rotate while the menu is displayed even after 
you finish playing an item. Press [∫] when you finish to preserve the 
unit’s motor and your television screen.[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA]...

20
RQT6951
Convenient functions
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]:
Skip back a few seconds within the current item (program, track or 
title).
[JPEG]: Skip back a few pictures.
During play
Press [QUICK REPLAY].
[Note]
This feature may not work while playing some parts of a disc or at all 
with some discs.
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press the numbered buttons.
To select a 2-digit number
e.g. 23: [S10] ➡ [2] ➡ [3].
[WMA] [MP3] [JPEG]
Press the numbered buttons then press 
[ENTER].
e.g....