Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions

							11
RQT6951
SC-HT790V, SC-HT800V
The front and surround speakers are the same. Use those you 
have connected the short cords to as front speakers and those you 
have connected the long cords to as surround speakers.
[1]Attaching the stickers to the speaker 
cables
Attach the speaker-cable stickers to make connection easier.
[2]Connecting the speakers
Keeping the cables out of the way (SC-HT810V only)
Pass the cables through the holes in the stand to keep them out of 
the way.[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i) 
terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
Caution
Hold the speakers by the sides. 
Applying pressure to the front 
net can damage the speaker.
STEP2Speakers
Speaker cables
≥3a4-m (13-foot) cables
≥2a10-m (33-foot) cablesSheet of speaker-cable 
stickers
The illustrations show SC-HT810V.
Setup example
Short cables
Long cablesCopper
Silver
_:
`:
Front (L)
SubwooferCopper
Front (R)
Surround (L)
Surround (R)
Center Silver
Click!
1 Pass the cable through the hole.
2 Pass through the cutout in the base. Stand

						

							12
RQT6951
To enjoy cable and satellite television
Connection ➡page 54
Subscribe to a cable or satellite company.If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a 
television, but the picture may be affected with some televisions 
and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the 
problem. If it persists, move the speakers further away from the 
television.
Basic connection
STEP3Television
75 ≠ coaxial cable
Video cable
AC INA
Y
P
B/CB
PR/CRCOMPONENT
VIDEO OUTS-VIDEO
OUTLINE
OUTLINE
IN VIDEO
OUT DVD EXTDVD/
VCR
VIDEO
IN
L
R
RF IN RF OUT
LOOP EXT
75
AM ANT FM ANTLOOPANT
GND
VIDEO
INVHF/UHF
RF IN
Television
(not included)
Video cable
(included)
Connect video cables directly to your television
The video signals on DVDs and videotapes have copyright 
protection. The video may not be shown correctly if you connect 
through an A/V selector or other equipment.Antenna cable
(usually disconnected 
from the television) 75 ≠ coaxial
cable
(included)
Cable TV
Outdoor antenna
Indoor antenna 75 ≠ coaxial cable
This cable carries broadcast signals to the television whether the 
unit is on or off so you do not need to connect the antenna directly 
to the television.
It does not carry other signals from this unit, so make sure you 
connect the television to VIDEO OUT. Contact your dealer if your 
television does not have the corresponding terminal.FromIf the connector 
doesn’t match 
➡page 55
If the connector 
doesn’t match 
➡page 55 Main unit

						

							13
RQT6951
∫Connecting a television with COMPONENT VIDEO terminals
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive 
output and provide a purer picture than the S-VIDEO OUT 
terminal. Connection using these terminals outputs the color 
difference signals (P
B/PR) and luminance signal (Y) separately in 
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends 
on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR). 
Connect to terminals of the same color.
≥After making this connection, change the black level for a better 
picture (➡page 31, Video — Black Level Control).
To enjoy progressive video
≥Connect to the component video input terminals on a 480P 
compatible television. (Video will not be displayed correctly if 
connected to an incompatible television.)
≥All televisions manufactured by Panasonic and that have 480P 
input connectors are compatible. Consult the manufacturer if you 
have another brand of television.
∫Connecting a television with an S-VIDEO IN terminal
S-VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO 
OUT terminal by separating the chrominance (C) and luminance 
(Y) signals. (Actual results depend on the television.)
[Note]
Connect to a different terminal group than that you used for the 
video cable (e.g., “VIDEO 2”).
Picture from this unit’s VCR will not appear when you use the 
same group input terminal connections because the S-video 
terminal input takes precedence.
For better video from DVD
The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the 
television to view video from the VCR section (➡page 12).
You may need to change the video-input mode on the television to view video from the VCR and DVD sections. Read your television’s 
operating instructions for details.
DVD EXTDVD/
VCR
Y
P
B/CB
PR/CRCOMPONENT
VIDEO OUTS-VIDEO
OUTLINE
OUTLINE
IN VIDEO
OUTVIDEO
IN
L
R
RF IN RF OUT
LOOP EXT
75
AM ANT FM ANTLOOPANT
GND
DVD EXTDVD/
VCR
COMPONENT
VIDEO INY
P
B
PR
Video cables
(not included)
Television
(not included) To television
Y
P
B/CB
PR/CRCOMPONENT
VIDEO OUTS-VIDEO
OUTLINE
OUTLINE
IN VIDEO
OUTVIDEO
IN
L
R
RF IN RF OUT
LOOP EXT
75
AM ANT FM ANTLOOPANT
GND
DVD EXTDVD/
VCR
IN S VIDEO
S-video cable
(not included)
Television
(not included) To television

						

							14
RQT6951
Conserving power
This unit consumes a small amount of power, even when it is 
turned off. The amount of power used depends on the display 
setting (➡page 44):
BRIGHT: 3.7 W DIM: 3.5 W OFF: 2.4 W
Audio memory backup
To save power when the unit is not to be used for a long time, 
unplug it from the household AC outlet.
Remember to reset the radio stations and any other memory items 
before using the unit again.
Information you enter into the unit’s memory remains intact for up 
to 2 weeks after the subwoofer’s AC power supply cord is 
disconnected.
STEP4Connecting the subwoofer, antennas, and AC power supply cords
AC INA
Y
P
B/CB
PR/CRCOMPONENT
VIDEO OUTS-VIDEO
OUTLINE
OUTLINE
IN VIDEO
OUTVIDEO
IN
L
R
RF IN RF OUT
LOOP EXT75
AM ANT FM ANTLOOPANT
GND
1L3L2R45R
A
DVD EXTDVD/
VCR
1
3
2
6
45
 System cable
AM loop antenna
FM indoor antenna2 AC power supply cords
SubwooferAdhesive tape
Fix the other end of the antenna 
where reception is best.AM loop antenna
Stand the antenna 
up on its base.
Keep loose antenna 
cord away from other 
wires and cords.
System cable
Catch to the rightAC power supply cord
To household AC outlet 
(AC 120 V, 60 Hz)FM indoor 
antenna
Catch up
To disconnect
Press the catch 
and pull out.
Click! Connect the AC power supply cord after all other connections are complete.
To disconnect
Press the catch 
and pull out.
Click! To household AC outlet 
(AC 120 V, 60 Hz) AC power supply cord
Unscrew the terminal 
with a Phillips-head 
screwdriver.White
Red
Black Main unit
AC power supply cords
Connect both AC power supply cords to enjoy all the features 
of this system.

						

							15
RQT6951
After plugging the unit into your household AC outlet and pressing 
[Í] to turn the unit on for the first time, the unit automatically tunes 
in all the channels it can receive and sets the clock.
The unit determines the type of transmission, TV or CATV, as 
follows:
TV: when there are less than 5 CATV channels.
CATV: when there are 5 or more CATV channels.
Preparation
≥Confirm that the antenna is connected correctly.
≥Turn on the television and select the video input for the VCR.
≥Press [VCR] to put the remote control in VCR mode.
Press [Í] to turn on the unit.
Plug-in Auto Tuning starts and the unit puts the stations it can 
receive into channels (➡page 43, Channel range).
The unit starts auto clock setting when finished, then displays the 
time.
[Note]
If auto tuning stops partway (by changing the source, turning the 
unit off, or due to a power failure.)
1 Disconnect the AC power supply cord on the main unit and then 
reconnect it.
2 Turn on the main unit.
To cancel partway
Press [MENU].
∫To start Plug-in Auto Tuning again (after 
relocation, for example)
Preparation
≥Press [Í] to turn on the unit.
≥Make sure there is no video cassette tape loaded in the unit.
≥Press [DVD/VCR] to select “VCR” as the source.
1 Press and hold [CHX] and [CHW] on the main unit 
simultaneously for 3 seconds until the channel changes to “2”.
2 Disconnect the AC power supply cord on the main unit and then 
reconnect it.
3 Turn on the main unit. Plug-in Auto Tuning restarts.
∫To set the channels manually (➡page 43).
∫If the unit couldn’t set the clock automatically
The MANUAL CLOCK SET screen appears. Set the time manually 
(➡page 42).
STEP5Plug-in Auto Tuning
DVD/VCR
DV D
RESET
TV/VIDEO
PA G E
GROUP
PICTURE MODE/SETUP
REPEAT
PLAY MODE
TV VOLiJET REW TV VOLj
OPEN/CLOSE/EJECT
TOP MENU
NAVI
PROG CANCEL SPEED
CH
CH OSD/DISPLAY
VOLUME
D.RE-MASTER
SUBWOOFER
POSITION
MEMORYSUBTITLE ZOOM QUICK REPLAYC.S.M
SFCC.FOCUS
SUPER SRNDS.POSITION
MUTING
SLEEP
ÎPL
[SHIFT]AUDIO
MIX 2CHTEST
CH SELECTRETURN DIRECT
NAVIGATORPLAY LISTMENU SLOW/SEARCH SKIP
1
100
23
456
78
09
TV TUNER FM/AM REC
ENTER VCR
S10/ ENTER
MENUVCR
DVD/VCRÍ
POWERÍ/IVCREJECTDV D
REC TIMER REC /REW FF/STOP PLAYSTOP PLAYDOWN UPPHONES
CH CHPROGRESSIVESELECTORVOLUMEOPEN/CLOSE
POWERÍ/ICH X CH W
Antenna system and channel captions all revert to the 
default values when you perform the procedure above. 
Reset the timer recording settings. (If necessary reset the 
clock first. ➡page 42, CLOCK SET)
AUTO CHANNEL SET
PROCEEDING
END :MENU2
Disappears     2

						

							16
RQT6951
∫TV maker setting
You can control the television by entering the remote control code.
1Refer the chart below for the code for 
your television.
2Aiming the remote control at the television
While pressing and holding [TV], 
press the numbered buttons to enter 
the code number.
≥Example: To select 01, press [0] ➡ [1].
≥The remote control outputs the on/off signal. If the code is 
correct, the equipment turns on or off. If it doesn’t, try 
entering another code.
[Note]
≥If your television brand is not listed or if the code listed for your 
television does not allow control of your television, this remote 
control is not compatible with your television.
≥Reenter the codes after you change the batteries.
∫TV operation
STEP6Operating the television
DVD/VCR
DV D
RESET
TV/VIDEO
PA G E
GROUP
PICTURE MODE/SETUP
REPEAT
PLAY MODE
TV VOLiJET REW TV VOLj
OPEN/CLOSE/EJECT
TOP MENU
NAVI
PROG CANCEL SPEED
CH
CH OSD/DISPLAY
VOLUME
D.RE-MASTER
SUBWOOFER
POSITION
MEMORYSUBTITLE ZOOM QUICK REPLAYC.S.M
SFCC.FOCUS
SUPER SRNDS.POSITION
MUTING
SLEEP
ÎPL
[SHIFT]AUDIO
MIX 2CHTEST
CH SELECTRETURN DIRECT
NAVIGATORPLAY LISTMENU SLOW/SEARCH SKIP
1
100
23
456
78
09
TV TUNER FM/AM REC
ENTER VCR
S10/ ENTER
Í
TV/VIDEO2
2
: TV VOLs
9 TV VOLr
3 CHW
4 CHX
Operation Buttons
Power on/
standby[Í]
Remote control 
TV mode[TV]
≥Switch the remote control mode to TV. Press 
before doing TV operations. When in TV 
mode, the [TV] button lights each time you 
press an operation button.
TV/Video switch [TV/VIDEO]
Selecting 
channels[3CHW] [4CHX] or numbered buttons 
[1–9, 100, 0,S10/ENTER].
≥[S10/ENTER] is used to confirm channel 
selection on some televisions manufactured 
by other companies.
Adjusting 
volume[:TV VOLj] [9TV VOLi]
ManufacturerCode No.ManufacturerCode No.
Panasonic 01, 02 PHILIPS 06
FISHER14PIONEER02, 10, 19
G.E. 02, 03, 07, 09 QUASAR 02
GOLD STAR07, 15RCA03, 07, 09, 13, 23, 24, 25
HITACHI 05, 07 SANYO 14
JVC12SHARP08, 21
LXI 03, 06, 07, 10, 14, 15 SONY 04
MAGNAVOX06, 07, 11, 15, 22SYLVANIA06, 07, 15
MITSUBISHI 07, 15, 16, 21 SYMPHONIC 17
NEC07, 15TOSHIBA10, 21
PHILCO 06, 07 ZENITH 18, 20

						

							17
RQT6951
Answer questions in the QUICK SETUP screen to make some 
simple DVD settings. 
Preparation
Turn on the television and select the video input for the DVD.
1Press [DVD] to put the remote control 
in DVD mode.
2Press [Í] to turn on the unit.
3Press [DVD/VCR] to select “DVD” as 
the source.
4Press [SETUP] to show the menus.
5Press [2,1] to select “Others” tab.
6Press [3,4] to select “QUICK 
SETUP” and press [ENTER].
7Press [3,4] to select “Yes” and 
press [ENTER].
8Press [3,4] to select the item and 
press [ENTER].
≥Menu Language (➡page 31)
≥Audio Language (➡page 31)
≥Subtitle Language (➡page 31)
≥TV Type (➡ below)
≥TV Aspect (➡ below)
9Press [ENTER] and then [SETUP] to 
end the settings.
To return to the previous screen
Press [RETURN].
∫TV Type
Select to suit the type of television.
≥Standard (Direct View TV) (factory preset)
≥CRT Projector
≥LCD TV/Projector
≥Projection TV
≥Plasma TV
∫TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your 
television.
If you have a regular 4:3 television, you can also select how video 
on some discs is shown (➡page 31, Video — TV Aspect).
≥4:3 Pan&Scan (factory preset)
Widescreen software is expanded to fill the 
screen of a 4:3 aspect television (unless 
prohibited by the producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the 
letterbox style on a 4:3 aspect television.
STEP7DVD QUICK SETUP
DVD/VCR
DV D
RESET
TV/VIDEO
PA G E
GROUP
PICTURE MODE/SETUP
REPEAT
PLAY MODE
TV VOLiJET REW TV VOLj
OPEN/CLOSE/EJECT
TOP MENU
NAVI
PROG CANCEL SPEED
CH
CH OSD/DISPLAY
VOLUME
D.RE-MASTER
SUBWOOFER
POSITION
MEMORYSUBTITLE ZOOM QUICK REPLAYC.S.M
SFCC.FOCUS
SUPER SRNDS.POSITION
MUTING
SLEEP
ÎPLAUDIO
MIX 2CHTEST
CH SELECTRETURN DIRECT
NAVIGATORPLAY LISTMENU SLOW/SEARCH SKIP
1
100
23
456
78
09
TV TUNER FM/AM REC
ENTER VCR
S10/ ENTER
[SHIFT]
2
RETURN
3
1
5–9 4, 9
Disc
Audio
Subtitle
Menus
RatingsEnglish
English Automatic
Level 8
SETUP
SELECT TAB
ENTER RETURN

						

							18
RQT6951
Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]Preparation
Turn on the television and select the video input for the DVD.
1Press [DVD] to put the remote control 
in DVD mode.
2Press [Í] to turn on the unit.
3Press [DVD/VCR] to select “DVD” as 
the source.
The following indicator appears when you select DVD.
4Press [SHIFT]r[OPEN/CLOSE/EJECT] 
to open the disc tray and place the disc.
≥If the disc contains both audio data (WMA and MP3) and 
JPEG, check “Mixed Disc—Audio & Stills” in the SETUP 
menu (➡page 31). Select “Stills (JPEG)” or “Audio (MP3/
WMA)”.
≥Load double-sided discs so the label for 
the side you want to play is facing up.
5Press [1] (play).
The disc tray closes and play begins. It is normal for sound 
and pictures to take time to start.
[WMA] [MP3] [CD] (CD text only)
Track information appears on the television. Press 
[SHIFT]i[SUBTITLE] to turn the display on or off.
6Adjust the volume.
[Note]
≥If “$” appears on the television 
The operation is prohibited by the unit or disc.
∫To enjoy progressive video
Press [PROGRESSIVE] on the main unit 
so “PR ON” appears on the display.
To check whether progressive output is on or off
Press [PROGRESSIVE]. “PR ON” (on) or “PR OFF” (off) appears 
on the display.
[Note]
≥The television will be disrupted for a moment but this is normal.
≥Output from this unit is interlace if you have connected to the 
television through VIDEO OUT or S-VIDEO OUT terminals, 
irrespective of the setting.
≥When progressive output is on, closed captions will not be 
displayed.
DVD/VCR
DV D
RESET
TV/VIDEO
PA G E
GROUP
PICTURE MODE/SETUP
REPEAT
PLAY MODE
TV VOLiJET REW TV VOLj
OPEN/CLOSE/EJECT
TOP MENU
NAVI
PROG CANCEL SPEED
CH
CH OSD/DISPLAY
VOLUME
D.RE-MASTER
SUBWOOFER
POSITION
MEMORYSUBTITLE ZOOM QUICK REPLAYC.S.M
SFCC.FOCUS
SUPER SRNDS.POSITION
MUTING
SLEEP
ÎPLAUDIO
MIX 2CHTEST
CH SELECTRETURN DIRECT
NAVIGATORPLAY LISTMENU SLOW/SEARCH SKIP
1
100
23
456
78
09
TV TUNER FM/AM REC
ENTER VCR
S10/ ENTER
[SHIFT]
2
3
1
4
45
6
;
342 1
ENTERSKIP
:  9SLOW/SEARCH
6  5
POSITION
MEMORY
RETURN
SUBTITLE
TOP MENUMENU
POWERÍ/IVCREJECTDV D
REC TIMER REC /REW FF/STOP PLAYSTOP PLAYDOWN UPPHONES
CH CHPROGRESSIVESELECTORVOLUMEOPEN/CLOSE
244
5
6
∫ STOP
PROGRESSIVE
Numbered 
buttons
StopPress [∫] (➡page 19, Resume function).
PausePress [;].
Skip Press [:] (backward) or [9] (forward).
Group skip [JPEG]
Press [4] (backward) or [3] (forward).
SearchPress [6] (backward) or [5] (forward).
You can turn off the sound (➡page 31, Audio—Audio 
during Search).
SlowWhile paused, press [6] (backward) or [5] 
(forward).
Frame-
by-
frameWhile paused, press [2] (backward) or [1] (forward).
Press and hold to change in succession.
Or, press [;] repeatedly for forward frame-by-frame.
Notes
≥Press [1] (PLAY) to restart play.
≥The speed of search and slow-motion increases up to 5 steps.
When playing Video CDs
≥You cannot move backwards during slow-motion and frame-
by-frame.
≥Pressing buttons to perform skip, search or slow-motion may 
take you to a menu screen.
dBdB
(Minimum) (Maximum)
DVD

						

							19
RQT6951
[DVD-A] [DVD-V] [VCD]
Press [3,4,2,1] to select an item and 
[ENTER] to confirm.
Or, press the numbered buttons.
To select a 2-digit number
e.g. 23: [S10] ➡ [2] ➡ [3].
Press [TOP MENU] to show the top menu.
Press [MENU] to show a menu.
Press [RETURN] to show a menu. [VCD]
[Note]
The disc continues to rotate while the menu is displayed even after 
you finish playing an item. Press [∫] when you finish to preserve the 
unit’s motor and your television screen.[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] 
(When the elapsed play time is displayed)
[JPEG]
During play
Press [POSITION MEMORY] to memorize a 
position.
Press again to replace the position.
This position is saved even if you turn the unit off, change the source 
or open the disc tray. When you turn the unit on, reselect DVD or 
reinsert the disc whose position you memorized, “!” flashes on the 
display. Press [1] (play) to start play from the memorized position. 
The position is cleared.
≥You can memorize positions on up to five different discs at a time. 
When you memorize another position, the earliest position is 
replaced. 
“!” flashes on the display when the unit has recorded the position at 
which you stopped play.
Press [1] (play) to start play from that position.
≥The position is cleared when you:
–Turn the unit off.
–Select another source.
–Open the disc tray.
≥Press [∫] to clear the position.
[DVD-V]
The following message appears 
immediately after you press [1] (play) 
when “!” is displayed. 
Press [1] (play) while the message is 
displayed and the beginning portions of 
each chapter up to the current one are played.
Full play resumes from the point where you pressed [∫] or 
[POSITION MEMORY].
(This feature works only within a title.)
If you do not press [1] (play), the message disappears and play 
starts from where you pressed [∫] or [POSITION MEMORY].
When a menu appears on the televisionPosition Memory function
Resume function
Chapter Preview
Position memorized
Press PLAY to Preview Chapters
[Remember] Press [DVD] first.

						

							20
RQT6951
Convenient functions
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]:
Skip back a few seconds within the current item (program, track or 
title).
[JPEG]: Skip back a few pictures.
During play
Press [QUICK REPLAY].
[Note]
This feature may not work while playing some parts of a disc or at all 
with some discs.
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press the numbered buttons.
To select a 2-digit number
e.g. 23: [S10] ➡ [2] ➡ [3].
[WMA] [MP3] [JPEG]
Press the numbered buttons then press 
[ENTER].
e.g. 123: [1] ➡ [2] ➡ [3] ➡ [ENTER].
≥This works only when stopped with some discs.
≥When playing DVD-Audio and you want to start play from a track in 
a different group, select the group first (➡ right).[DVD-A] [WMA] [MP3] [JPEG]
1Press [GROUP].
2Press [3, 4] to select the group 
number and press [ENTER].
3Press [3, 4] to select the track/
picture number and press [ENTER].
≥You can also select the group and track/picture number with 
the numbered buttons.
[DVD-A]
≥Playing all the groups in succession (➡page 25, All group 
play)
≥Playing bonus groups
Some discs contain bonus groups. If a password screen appears 
after selecting a group, enter the password with the numbered 
buttons. Refer also to the disc’s jacket.
[JPEG]
While a picture is displayed
1Press [OSD/DISPLAY] until the disc 
information screen is displayed 
(➡page 29).
2Press [2,1] to select “Angle” and 
press [3,4] to select the rotation 
angle.
The picture rotates ninety degrees each time you do this.
0()90()180()270
^-----------------------------------J
[DVD-A]
During play
Press [SHIFT]r[PAGE].
The page changes each time you do this.
Replaying a scene—QUICK REPLAY
Starting play from a selected item
DVD/VCR
DV D
RESET
TV/VIDEO
PA G E
GROUP
PICTURE MODE/SETUP
REPEAT
PLAY MODE
TV VOLiJET REW TV VOLj
OPEN/CLOSE/EJECT
TOP MENU
NAVI
PROG CANCEL SPEED
CH
CH OSD/DISPLAY
VOLUME
D.RE-MASTER
SUBWOOFER
POSITION
MEMORYSUBTITLE ZOOM QUICK REPLAYC.S.M
SFCC.FOCUS
SUPER SRNDS.POSITION
MUTING
SLEEP
ÎPL
[SHIFT]AUDIO
MIX 2CHTEST
CH SELECTRETURN DIRECT
NAVIGATORPLAY LISTMENU SLOW/SEARCH SKIP
1
100
23
456
78
09
TV TUNER FM/AM REC
ENTER VCR
S10/ ENTER
PAGE
GROUP
REPEAT
OSD/DISPLAY342 1
ENTER
QUICK 
REPLAY
SHIFT CANCEL
DVD
Numbered 
buttons
Selecting groups to play
Rotating pictures
Selecting still pictures—Page Skip
1
1
118
Group number
Track No. in group e.g. [MP3]
Track No. in disc
Total No. of tracks on disc
2
3
12 180SlideshowON   5 secOFF
Angle
PAGE 1
DVD