Home > Panasonic > DVD System > Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions

Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions

Here you can view all the pages of manual Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions . The Panasonic manuals for DVD System are available online for free. You can easily download all the documents as PDF.

Page 51

51
RQT6951
You can make the sound of the center speaker seem 
like it is coming from within the television.
Press [SHIFT]r[C.FOCUS].
Each time you do this:
CENTER FOCUS1 (Normal)>CENTER FOCUS2 (Enhanced)
 ^------------"----=OFF!----------""----=}
≥This does not work when Super Surround is turned on.
≥This will have less effect when Dolby Pro Logic is turned on.
Using this function makes you feel like you are 
sitting in the ideal seating position (in the center of 
the circle formed by the...

Page 52

52
RQT6951
Other speaker setup options
[Note]
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 Ib.) per screw.
1Remove the stand. (SC-HT810V only)
BEFORE REMOVING THE STAND
≥Take the speaker cable out of the stand’s hole if it is 
threaded through.
≥Lay the speaker on a soft cloth.
Unscrew the screw with a Phillips-head screwdriver.
2Screw a screw (not included) into the 
wall.
3Fit the speaker securely onto the 
screw with the hole or holes....

Page 53

53
RQT6951
Optional connections
[A]You can record sound from discs, video cassette 
tapes, or radio, etc., to a tape deck.
1DiscsPress [DVD/VCR] to select “DVD” as the source.
Video cassette tapes
Press [DVD/VCR] to select “VCR” as the source.
Radio
Press [FM/AM] to select “FM” or “AM”.
2 Start recording and play.
Refer to the manual of the other unit for details.
[B]You can playback the sound from a tape deck/laser 
disc player, etc., through this unit’s speakers.
1 Press [VCR] to put the remote control...

Page 54

54
RQT6951
Optional connections
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
Subscribe to a cable TV or satellite TV service.
≥Consult your service provider regarding appropriate cable box or satellite receiver.
≥Select the applicable input on your television to view the output from your cable box/satellite receiver through...

Page 55

55
RQT6951
Use one of the following connections to suit the antenna lead.
∫A single twin lead
∫A twin lead and a coaxial cable
∫Two twin leads
≥If your television has both lead and coaxial VHF terminals, use the 
lead connection to minimize signal loss.Use one of the following connections to suit the antenna terminals 
on your television. Refer to the television’s operating instructions.
∫A twin lead and coaxial plug terminal
∫A twin lead terminal
∫Two twin lead terminals
∫Multiple antenna terminals...

Page 56

56
RQT6951
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do 
not solve the problem:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or 
the website (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www. panasonic.ca), or an...

Page 57

57
RQT6951
Sound
Picture
Disc picture
VCR picture
No sound.
Distorted sound.≥Check the connections.
≥Turn the volume up.
≥Turn muting off.
≥Switch off the unit, determine and correct the cause, then switch the unit on.
Causes include:
– Shorting (bare wires touching) of positive and negative speaker wires.
– Using speakers with an impedance lower than that rated for this unit.
– Straining of the speakers through excessive volume or power.
– Using the unit in a hot environment without proper...

Page 58

58
RQT6951
Troubleshooting guide
Recording
Listening to the radio
Unit display
Television display
“1” flashes when I try to start 
recording. 
Cannot record.≥If the erasure prevention tab has been removed, cover the hole with adhesive tape. 5
Timer recording doesn’t record a 
program correctly.≥Check the clock and calendar.
≥Set the channel and start and end times correctly.
≥Be sure to press [F] after programming to put the unit in timer recording standby.
≥Program times may be overlapped.—
—
38
—...

Page 59

59
RQT6951
Glossary
Decoder
A decoder restores the coded audio signals on DVDs to normal. This 
is called decoding.
Dolby Digital
This is a method of coding digital signals developed by Dolby 
Laboratories. Apart from stereo (2-channel) audio, these signals can 
also be multi-channel audio. A large amount of audio information 
can be recorded on one disc using this method.
Dolby Pro Logic
A surround system where a 4-channel audio track is recorded as 
2 channels and then is restored to 4 channels for...

Page 60

60
RQT6951
Specifications
∫AMPLIFIER SECTION
[SC-HT790V]
RMS output power, 10 % total harmonic distortion
1 kHz FL/FR40 W per channel 6 ≠
1 kHz Center50 W per channel 6 ≠
1 kHz SL/SR40 W per channel 6 ≠
100 Hz Subwoofer140 W per channel 4 ≠
Total RMS Dolby Digital mode power350 W
FTC output power, 1 % total harmonic distortion
120 Hz–20 kHz FL/FR20 W per channel 6 ≠
120 Hz–20 kHz Center25 W per channel 6 ≠
120 Hz–20 kHz SL/SR20 W per channel 6 ≠
45 Hz – 120 Hz Subwoofer85 W per channel 4 ≠
Total FTC...
Start reading Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions

Related Manuals for Panasonic Dvd Vcr Home Theater Sound System Sc Ht790v Operatinf Instructions

All Panasonic manuals