Panasonic Dvd Vcr Deck Pv D4734 Operating Instructions

31
VCR
 Operation
 Auto Play
Insert a tape ➛ Power comes on,
➛ Play starts if there is no record tab
(see p. 6).
 Auto Rewind
Play
Fast Forward
 Play Auto Eject
(Repeat Play must be off)
Play 
➛  ➛ ➛  ➛ 
➛ Tape end ➛  ➛ ➛  ➛ 
➛ Rewind ➛  ➛ ➛  ➛ 
➛ Stop
➛  ➛ ➛  ➛ 
➛ Tape ejects if some programs are set.
Auto Operation Functions
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
➛
 Tape end ➛ Rewind ➛ ➛➛ ➛
➛ Stop
Repeat Play
Set to...

32For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Special VCR  Features
ACTION
SET SELECT
REC
VCR/TV Selector FeatureVCR/TV Selection Feature
The VCR/TV selection can be set to auto or manual.
3 1
Press ACTION*
to display MENU.
Press 
to select “AUTO VCR/TV,”
and
press SET
to set “ON” or “OFF.”
Press ACTION
to return to normal screen.
4
Note
OFF(Manual):You select “VCR” or “TV” mode using
the VCR/TV button on the remote....

33
VCR
 Operation
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF:Screen turns solid blue when signal is weak or
non-existent.
Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION
to return to normal screen.
4 3 2
Press 
to select “SET UP
CHANNEL,” and
press SET.
Press 
to select “WEAK SIGNAL
DISPLAY,” and
press SET
to set “ON”...

34For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Special VCR Features (continued)
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV mode.
4 31
If “OFF,” remote warning will not appear
when invalid key is pressed.
Press ACTION*
to display MENU.
Press 
to select
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
Press ACTION
to return to normal screen....

35
VCR
 Operation
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE
mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
4
Press PLAY to start dubbing.
Playing VCR starts playback.Press STILL/PAUSE to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:Unauthorized exchanging and/or copying of copyrighted recordings may...

36For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Te amo
Disc Operation
Ready Checklist
Please read “Basic DVD Operation”
on page 22.
[Subtitle language]
[Audio sound track language]
Change the No. by pressing ,
and press SET.
[Audio attribute 1 type, sampling
frequency, bit No. of the disc (see p. 53.)]
If, after several presses of the AUDIO
button the language does not change,
language selection is not offered on the
disc.
When...

37
SELECT : ANGLE
SELECT : ANGLE
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
The ANGLE Indicator lights up on
DECK when a scene recorded at
different angles is detected.
The angle number can be set
beforehand so that the angle is
switched whenever the ANGLE
Indicator lights up.
1Press AUDIO in Play mode
to display the audio screen.
Vocal Selection for Karaoke Discs (DVD only)
DVDs may contain scenes shot from...

38For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Some DVDs have more than one title, e.g. movies.
If the disc offers a title menu, you can select the desired
title number. (Operation may vary according to the disc.)
1
Press TITLE*
in Play mode
to display the title screen.
Title Menu (DVD only)
DVDs may offer a special menu. This menu may include
guides to unique contents, audio/subtitle languages, etc.
Although contents and operation...

39
You can program specific tracks and order of play.
Program Play (CD only)Ready Checklist
DECK is in DVD mode, press DVD.
CD is inserted.
1Press ACTION
to display DVD MAIN MENU.
2Press to select
“PLAY MODE,” and
press 
SETto display.
3
Press to select
“PROGRAM PLAY,”
and
press 
SET to display.
5
Press  
to select “START,” and
press SET to start play
of programs in the
sequence selected.
To cancel, press STOPduring play, then pressCLEAR.
4Press  
to select a track
number (Track
numbers on disc are...

40For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Tracks are played in a random order.
Random Play (CD only)
Press ACTION*
to display DVD MAIN MENU.1
Disc Operation (continued)
Press to select “PLAY MODE,”
and
press 
SETto display.
2
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 4 : 3  Pan&Scan
PROGRESSIVE  OUT:
OFF
PLAY  MODE
Press to select
“RANDOM PLAY,” and...