Panasonic Dvd Vcr Deck Pv D4734 Operating Instructions

							PV-D4734S
DVD/VCR DECK
Operating Instructions
Model No.
Connections and Initial Setup Procedures are on pages 12 to 17.
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
®
As an ENERGY STAR   Partner, Matsushita Electric Corporation
of America has determined that this product or product model
meets the 
ENERGY STAR   guidelines for energy efficiency.
®
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Initial Setup
(Connection)
Basic
Operation
VCR
 Operation
DVD
 Operation
For Your
Information
LSQT0796 A
MULTI FORMAT PLAYBACK
*Ability to play back may depend on recording conditions.
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:131 
						

							INSTALLATION
1 POWER SOURCE CAUTION
Operate only from a power source indicated on the unit or in this
manual. If necessary, have your Electric Utility Service
Company or Video Products Dealer verify the power source in
your home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this product comes with either a polarized
power cord plug (one blade is wider than the other), or a three-
wire grounding type plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot fully insert
the plug, try reversing it. If it still will not fit, have an electrician
install the proper wall outlet. Do not defeat the safety feature by
tampering with the plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a three-hole grounding outlet. If necessary,
have an electrician install the proper outlet. Do not defeat the safety
feature by tampering with the plug.
3 POWER CORD
Make sure power cords are routed so that they are not likely to
have anything rest on them, roll over them, or be in the way of
walking traffic. If an extension cord is used, make sure it also
has either a polarized or grounded plug and that the cords can
be securely connected. Frayed cords, damaged plugs, and
damaged or cracked wire insulation are hazardous and should
be replaced by a qualified service technician.
Overloaded outlets and extension cords are fire hazards and
should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat generated during
operation. If they are blocked, heat build-up inside the unit can
cause failures that may result in a fire hazard or heat damage to
cassettes or discs.
For protection, follow these rules:
a. Never cover ventilation slots or the unit while in use, or
operate the unit when placed on a bed, sofa, rug, or other
soft surface.
b. Avoid built-in installation, such as a book case or rack,
unless proper ventilation is provided.
5 PLACEMENT: AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place the unit over or near heater or radiator, in direct
sunlight, inside closed vehicles, in high temperature [over 104°F
(40°C)], or in over 75% humidity. If the unit is suddenly moved
from a cold place to a warm one, moisture may condense in the
unit and on the tape causing damage. Never subject the unit to
vibration, impact, or place it so that the surface is tilted as
internal parts may be seriously damaged.
6 TO AVOID PERSONAL INJURY
Do not place unsecured equipment on a
sloping surface.
Do not place this unit on any support that
is not firm, level, and adequately strong.
The unit could fall causing serious injury
to a child or adult and damage to the unit.
An appliance and cart combination should
be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
Carefully follow all operating instructions and use the
manufacturers recommended accessories when operating
this unit or connecting it to any other equipment.USING THE UNIT
If the unit has been in storage or moved to a new location, refer first to the
INSTALLATION section of these safeguards.
1 KEEP THE UNIT AWAY FROM WATER OR MOISTURE OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN,  MOISTURE, OR STRONG
IMPACT, unplug the unit and have it inspected by a qualified service technician
before use.
3 DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or before leaving the unit
unused for extended periods of time, disconnect all equipment from the power
source as well as the antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN
Never expose the unit to rain or water. DO NOT OPERATE if liquid has been
spilled into the unit. Immediately unplug the unit, and have it inspected by a
service technician. Fire and shock hazards can result from electrical shorts
caused by liquid contact inside.
Never drop or push any object through openings in the unit. Some internal parts
carry hazardous voltages and contact can cause electric shock or fire hazard.
Do not put any foreign object on the disc tray.
Avoid placing the unit directly above or below your TV set as this may cause
electrical interference. Keep all magnets away from electronic equipment.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of fire,
shock, or other hazards.
6 CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically untreated cloth to gently
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air that
could over-spray, or seep into the unit and cause electrical shock. Any substance
such as wax, adhesive tape, etc. may mar the cabinet surface. Exposure to
greasy, humid, or dusty areas may adversely affect internal parts.
SERVICE
1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this product
does not operate properly, do not attempt to open or remove covers, or make
any adjustments not described in the manual. Unplug the unit and contact a
qualified service technician.
2 IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only parts specified by the
manufacturer, or those having the same safety characteristics as the original
parts. The use of unauthorized substitutes may result in fire, electric shock,
or other hazards.
3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK
After any service or repairs to the unit, request the service technician to
conduct a thorough safety check as described in the manufacturer’s service
literature to ensure that the unit is in safe operating condition.
Important Safeguards and Precautions
GROUND 
CLAMP
ELECTRIC
SERVICE
EQUIPMENTANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC- NATIONAL 
  ELECTRICAL CODE
OUTDOOR  ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system is connected to the equipment, be sure the
antenna or cable system is grounded so as to provide some protection against
built up static charges and voltage surges.
Section 810 of the National
Electrical Code, ANSI/NFPA 70
(in Canada, part 1 of the Canadian Electrical
Code) provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR
CIRCUITS
An outside antenna system should be located well away from power lines,
electric light or power circuits and where it will never come into contact with
these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines, circuits or
other power sources as this could be fatal. Because of the hazards involved,
antenna installation should be left to a professional.
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO
THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANUAL AND ON THE PRODUCT.
2
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:132 
						

							3 3
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
RISK OF ELECTRIC SHOCK
DO NOT OPENCAUTION
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol warns the user that uninsulated voltage within the unit may
have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
Safety Precautions/Mesures de sécurité
To prevent fire or shock hazard, do not expose this equipment to rain
or moisture.
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
AVERTISSEMENT :
Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
exposer cet appareil à la pluie ou à une humidité excessive.
ATTENTION :
Pour éviter les chocs électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Region Management Information:
This DECK is designed and manufactured to respond to the
Region Management Information that is recorded on a DVD
disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DECK, this
DECK cannot play this disc.

The Region number for this DECK is “1”.

The Player will play DVD-Video marked with labels
containing “1” or “ALL”.
Example:
CAUTION:UNIT IS A CLASS I LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE
YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER
OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.CAUTION:
LASER RADIATION
WHEN OPEN DO NOT
STARE INTO BEAM.
ATTENTION:
RAYONNEMENT
LASER EN CAS
D’OUVERTURE.
NE PAS REGARDER
DANS LE FAISCEAU.
(Inside of product)
FCC NOTE:This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when operated in a
residential environment. If this equipment does cause interference to radio or television reception,
which can be determined by turning the equipment off and on, use the equipment in another
location and/or utilize an electrical outlet different from that used by the receiver.
If necessar y, consult the dealer or an experienced radio/TV technician for help. The user may find
the booklet, “Something About Interference” available from FCC local regional offices helpful.
FCC Caution:To assure continued compliance, (example- use only shielded interface cables when connecting
to other devices.) Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
1ALL1
     2
        4
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:133 
						

							4For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Before Using
Congratulations
on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring you
years of enjoyment. Please fill in the information
below. The serial number is on the tag located
on the back of your DECK.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.                       PV-D4734S
Serial No.
Only use tapes with the  mark in this DECK.
Record/ Playback Time
SP
(Standard Play)
SLP
(Super Long Play)
Type of Video Cassette
Tape Speed
Setting
T180 T160 T120
2 Hours
40 Minutes 2 Hours
6 Hours 8 Hours3 Hours
9 Hours
Accessories
RF Coaxial Cable
LSJA0418 Batteries 2 “AA” Remote Control
EUR7724KC0
To order accessories,
call toll free
1-800-332-5368.
Video Head Clog Sensor
During playback, this screen
appears if clogging is detected.
To remove screen, press PLAY
on the remote or DECK. Playing older or damaged tapes may eventually
cause video heads to become clogged.V I DEO  HEADS  MAYNEED  CLEAN I NGPLEASE   I NSERT  HEADCLEAN I NG  CASSETTEOR  REFER  TO  MANUAL
END               : PLAY
Head Cleaning
Use “dry” type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
If head clog symptoms persist, contact your
nearest servicenter by visiting our Web Site
(see p. 61).
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
(to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise.
Press CH (TRACKING) 
/ on the remote control
or on DECK until the picture clears up.
To return to Auto Tracking, press POWER off, then
on again a few seconds later.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING) / operate as a
V-Lock control.
Features for a Quality Picture (VCR)
Cleaning DECK
Use a soft cloth or dusting attachment of a vacuum
cleaner to remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and can be
marred by alcohol and various solvents.
Avoid excessive use of oil-based furniture polishes
since the materials used in the cabinet will
accumulate more dust. We recommend using a
non-abrasive, antistatic cleaner and polisher.
RR
RRRR
RR
Loading the Batteries
     Battery replacement cautionDo not mix old and new batteries.
Do not mix alkaline with manganese batteries.
1) Open cover.
3) Close cover.
2) Insert batteries as
marked.
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:134 
						

							5
Table of Contents
Timer Recording...........................................................24, 25
MTS Broadcast/ VHS Hi-Fi Stereo System.................26, 27
Multi-Brand Control Feature........................................28, 29
Tape Operation 
(Search System)......................................30, 31
Special VCR Features................................................32 ~ 34
Copying Your Tapes 
(Dubbing) ......................................................35 Important Safeguards and Precautions.........................2, 3
Before Using.........................................................................4
DECK & Cassette Information........................................6 , 7
Location of Controls....................................................8 ~ 10
Displays 
(On Screen Displays and Multi Function Display) .................11
Connections...............................................................12 ~ 15
Initial Setup for Basic Connections 
(Ready to Play).......16, 17
Reset Language, Channels, Clock, VCR’s Output Channel..18, 19
Playback/ Record on a Tape........................................20, 21
Initial Setup
(Connection)
Basic
Operation
VCR
 Operation
DVD
 Operation
For Your
Information
Initial Setup (Connection)
DVD / VCR
Basic Operation
VCR
DVD
Basic DVD Operation...................................................22, 23
VCR Operation
Disc Operation............................................................36 ~ 41
DVD-RAM Operation 
(DVD-RAM only)..............................42, 43
DVD Operation using On-Screen Displays..............44 ~ 48
MP3/JPEG Playback Operation.................................49 ~ 51
Settings for DVD Operation.......................................52 ~ 55
Language Code List...........................................................56
DVD Operation
For Your Information
Warning and Instruction Displays.....................................57
Before Requesting Service..........................................58, 59
Limited Warranty..........................................................60, 61
Customer Services Directory............................................61
Spanish (Español) Quick Use Guide.........................62 ~ 69
Index..............................................................................70, 71
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:135 
						

							6For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
DECK & Cassette Information
DVD-RAM discs
DVD-RAM discs must meet the following conditions
for this unit to be able to play them.
TypeNon-cartridge discs
Discs that can be removed from
their cartridges (TYPE 2 and 4)
Capacity12 cm (5”) 9.4 GB (double-sided)
and 4.7 GB (single-sided)
8 cm (3”) 2.8 GB (double-sided)

Remove TYPE 2 and 4 discs from their cartridges
before use, then return them when you are finished.
Read the instructions for the disc carefully.
Some parts of the disc, for example where one program
ends and another begins, may not play smoothly.
If disc is brought from a cold to a warm
environment, moisture may form on the disc
Wipe away moisture with a soft, dr y, lint-free cloth
before using disc. (See above.)
Improper disc storageDiscs could be damaged if stored or left in areas:
 exposed to direct sunlight.
 that are humid or dusty.
 near heat (i.e. heater, radiator, etc.).
Disc Handling
To clean disc surfaceWith a soft, damp (water only) cloth,
gently wipe from the center hole to the
outer edge as shown below. (Wiping in a
circular pattern will scratch the surface.)
 DVD-RAM, DVD-R :
Clean only with the DVD-RAM disc
cleaner available. Never use cloths or
cleaners for CDs etc.
Handling precautionsSticking a label on the disc may impair DVD-R playback.
Do not attach sticker to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off
stickers.)
Only hold disc by edges as shown below. Finger prints,
dirt and scratches can cause skipping and distortion.
Do not write on label side of disc.
Never use record cleaning
sprays, benzine, thinner,
static electricity prevention
liquids, or any other solvent.
Do not try to close disc tray when disc is not
properly placed.
Disc tray
Disc
Prevent Accidental Tape Erasure
Record Tab
Cover the hole
with cellophane tape.
To record again Break off the tab to
prevent recording.
Screw driver
DECK can play back discs bearing any of the
following marks:
Discs which cannot be playedDVD with Region No. other than “1” or “ALL”
PAL discs, DVD-ROM, DVD-Audio, DVD-RW,
DVD+R, DVD+RW, CD-ROM, CDV, CD-G, CVD,
SVCD, SACD, CD-TEXT, Divx Video Disc,
Photo-CD and Video CD [Discs Played 8cm (3) or 12cm (5)]
DVD (DVD-Video)
CD (CD-DA)
LogoDisc type
DVD-R (DVD-Video formatted
discs [finalized])
Disc formats supported by this DECK
DVD-RAM (Version 1.1 of the
Video Recording Format a
unified video recording
standard)
Notes
Do not use irregularly shaped discs (e.g. heart-
shaped), as these can damage the unit.
It may not be possible to play CD-R, CD-RW,
DVD-R and DVD-RAM in all cases due to the
type of disc or condition of the recording.
CD-R/CD-RW
CD-DA format
MP3/JPEG file
and finalized.*
*A process that allows play on compatible equipment.
Built-in Head Cleaner
A clean video head helps produce a clear picture.
So, we have equipped your DECK with a built-in, non-
chemical head cleaning system that helps prevent
clogging of the video heads. Cleaning is performed
each time you load or unload a video cassette.
This feature is preventative only, If your video
heads are seriously clogged, consider the use of
a chemical non-abrasive head cleaning kit or take
your DECK to a Servicenter.
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:136 
						

							7
Specifications
Power Source:120 V AC, 60 Hz
Power Consumption:Power On: Approx. 28 watts, Power Off: Approx. 0.85 watts
Video Signal:EIA Standard NTSC color
Video Recording System:4 rotary heads helical scanning system
Audio Track:1 track (Normal), 2 channel (Hi-Fi Audio Sound)
Tuner
 Broadcast Channels:VHF 2 ~ 13, UHF 14 ~ 69
 CABLE Channels:Midband A through I (14 ~ 22), Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64), Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A (01), Ultraband 65 ~ 94, 100 ~ 125
Input/Output Terminal:Audio/Video Line Input/Output, RF Input/Output
Input Terminal:Audio/Video Line Input (Front)
Output Terminal:S-Video Output (DVD only), Component Video Output (DVD only)
Audio Output 2 (L), (R)
Operating Temperature:5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating Humidity:10 % ~ 75 %
Weight:3.85 kg (8.5 lbs).
Dimensions:430 (W) x 95 (H) x 273 (D) mm
16-15/16” (W) x 3-3/4” (H) x 10-3/4” (D) inch
Discs Played
(1) DVD-Video Disc5” (12 cm) single-sided single-layer
5” (12 cm) single-sided double-layer
5” (12 cm) double-sided double-layer (one layer per side)
3” (8 cm) single-sided single-layer
3” (8 cm) single-sided double-layer
3” (8 cm) double-sided double-layer (one layer per side)
DVD-RAM Disc5” (12 cm) 9.4 GB (double-sided) and 4.7 GB (single-sided)
3” (8 cm) 2.8 GB (double-sided)
(2) Compact Disc5” (12 cm) disc
(CD-DA) 3” (8 cm) disc
(CD-R/CD-RW, MP3, JPEG)
Digital Audio Output:Digital Optical Connector
Pickup:Wavelength: 655 nm (DVD), 790 nm (CD)
Laser power: CLASS II
Note:Designs and specifications are subject to change without notice.
Definition of Terms (DVD)
Angle:Some DVD discs feature scenes simultaneously shot from different angles.
The ANGLE button can be used to view the scene from different angles.
(ANGLE Indicator lights on DECK when a scene recorded at different
angles is detected.)
Chapter Number:Titles are subdivided into numbered sections. You can quickly search for
a favorite scene using these numbers.
DVD:A high-density optical disc on which high-quality pictures and sound have
been digitally recorded. DVD incorporates video compression technology
(MPEG II) and high-density recording technology which allow entire
movies to be recorded with incredible playback quality.
Subtitles:Written dialogue which appears at the bottom of the screen.
Time Number:The elapsed play time from the start of a disc or title. Use to quickly find
scenes. (May not work with some discs.)
Title Number:For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.
Track Number:Numbers assigned to tracks on CDs to allow specific tracks to be quickly
located.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093,
licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Initial Setup
(Connection)
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:137 
						

							8For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Location of Controls
EJECT button:When this button is pressed in VCR mode, the tape is ejected.
This button is inoperative if pressed during recording.
If pressed in DVD mode, the disc tray opens or closes.
Remote Control
ZOOMp. 37
POWER
TV modep. 28
EJECT /OPEN / CLOSEpp. 20, 22
PLAYpp. 20, 22
VCR/TVp. 21
ANGLEp. 37
SUB TITLEp. 36
SELECT    
Bold:VCR Function   /  Bold Italic:VCR and DVD Functions
Italic:DVD Function   /  Normal:Others
CHANNEL  /  /TRACKING / V-LOCK /   10pp. 4, 21, 22
VOLUME + / -p. 28
MENU / PLAY LISTp. 38, 43
DVD modep. 28
ACTIONpp. 18, 52
SET
VCR modep. 28
STOPpp. 20, 22
ADD/DELETE / CLEARpp. 19, 39
NUMBER keys
REWIND / SEARCH /SLOW-pp. 20, 23
FAST FORWARD /SEARCH / SLOW+pp. 20, 23
PAUSE / STILLpp. 20, 23
Virtual Surround Sound (V.S.S.) /ENTERpp. 23, 28
TITLE /DIRECT NAVIGATORp. 38, 42
AUDIO (SAP / Hi-Fi)pp. 27, 36
INPUTp. 35
DISPLAYp. 11, 44
RETURN / SEARCHpp. 22, 30
COMMERCIAL SKIP /ZERO SEARCHpp. 30
SPEEDp. 21
RECORDp. 21COUNTER RESETp. 30
PROGRAMp. 24
SKIP+ SKIP- p. 23
TAPE POSITION /STATUSVOLUME ADJUSTp. 31, 41
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:138 
						

							9
Front View of DECK
Audio/Video
Input Connector 2
(LINE 2)
 p. 35
CHANNEL /TRACKING/V-LOCKpp. 4, 21
POWER
OPEN/CLOSEp. 22
STOP/EJECTp. 20
Multi Function
Display
p. 11RECp. 21
Disc TrayCassette
Compartment
PLAYp. 20
Remote
Sensor
Front View of DECK
STOPp. 22
Bold:VCR Function
Italic:DVD Function
Bold Italic
:VCR and DVD Functions
Normal:Others
PLAYp. 22
If the disc cannot be removed...
First, unplug DECK. Then, prepare a rigid
wire (e.g. an extended paper clip) and,
applying moderate force, insert it straight
into the hole at the base of the tray.
The tray will eject a little. Now, pull the tray
all the way out and remove the disc.
Over 2 inches
Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone.
 Make sure a tape is not inserted in the DECK.
Reset All Memory Functions
Press and hold both VCR PLAY
and CHANNEL 
 on the DECK for
more than 5 seconds.
 The power shuts off. Turn DECK Power on.
3Perform “Initial Setup (Ready to Play)”
on page 16.
2 1
12 1
Initial Setup
(Connection)
REWIND / SEARCH /SKIP  p. 20, 23
FAST FORWARD/ SEARCH /SKIP  p. 20, 23
PV-D4734S P1-25 (040202).p65 2004/02/02, 13:139 
						

							10For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Location of Controls (continued)
The following table shows the status of the output jacks when in VCR or DVD mode.Bold:VCR Function
Italic:DVD Function
Bold Italic
:VCR and DVD Functions
NotePROG functions on the remote are not available when using Component Video Output and
S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.
Video Output
Audio Out 1
Audio Out 2Component
Video OutputS-VIDEO OUT
VCR
DVD
YES
YESN/AN/A
YES
To enjoy PROGRESSIVE SCAN video
(1).Connect Component Video Output to the component video input terminals of a television.
(See p. 13.)
(2).When PROGRESSIVE OUT is set to “ON” in the DVD Main Menu (p. 55), a Progressive
Scan signal is output from the 
Component Video Output Connector.
Notes
The screen may shift off-center when using progressive output. Please adjust the screen
position if this occurs. (Refer to your TV manual.)
If the television is not progressive compatible, a progressive scan picture is not available.
Connect the Video Output or S-Video Output connector (see p. 12, 13) and
set PROGRESSIVE OUT to “OFF” in the DVD Main Menu. (See p. 55.)
Rear View of DECK
AC Power Plug
S-Video Out Connector
(DVD Only)
pp. 10, 13
Component Video Output
Connector (Y, PB, PR)
(DVD Only)
p. 13
Audio Output 2
Connector (L/R)
p. 13 Optical Digital Audio
Output Connector
(DVD Only)
p. 15
Video Input
Connector
p. 35Video Output
Connector
p. 12
Audio Output 1
Connector (L/R)
p. 12
VHF/UHF Antenna Input Terminal
p. 12VHF/UHF Antenna Output Terminal
p.12
While plugged into an AC outlet,
this DECK consumes 0.85 W of
electrical power in off mode.

Audio Input
Connector (L/R)
p. 35

PV-D4734S P1-25 (040202).p65 2004/02/02, 13:1310