Panasonic Dvd Vcr Deck Pv D4734 Operating Instructions

11
VCR
TIMER
RECHi - Fi
DVD
A
MANGLE
REW        1 2 : 0 0AM0 : 25CH 02-0 : 1 2 : 3 4 SPSTEREOSAPMONO
VCR Status & Clock DisplaysBlank Tape/ No Video Signal
Indications
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with Weak
Signal Display Feature (p. 33) set to OFF,
the TV screen will turn solid blue.
Function Status
Rec Time Remaining
(OTR mode only,
see p. 21.)
Current Time
Channel
Tape Speed
(See p. 4.) Broadcast Audio
Being Received...

12For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Connections
1 Disconnect antenna or cable from TV
and connect to DECK.
Basic Connections
Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b
(not supplied) as shown in the figure below.
If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher
quality picture and sound.
You can enjoy stereo sound even if your TV is not stereo by connecting a...

13
You CannotYou Can
record and view
both scrambled
and unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
splitter.view a channel
other than the
one selected
for any type of
recording.
set a Timer
recording of a
channel unless
you select it on
the Cable Box.IN FROM ANT.
OUT
 TO TV
IN 1
VHF/UHF
OUT
IN 2 IN 1
Cable Box
OUT IN OUT 2 OUT 1
2-Way Splitter
OUT
A/B Switch IN
  
      
  Connect With Two Cable Boxes
IN FROM...

14For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Connections (continued)
Audio Connections
Ready Checklist
Turn down the volume, then turn DECK, as well as other equipment to be connected,
off before proceeding with connection.
Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color...

15
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or DTS decoder, you can
enjoy theater-quality audio in your home. [An optical digital audio cable (optional)
is required when an optional Dolby Digital decoder or DTS decoder is used.]
Notes on connecting an optical
digital audio cable (optional)
Firmly connect the cable to the
connector....

16For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Before doing Initial Setup
Initial Setup for Basic Connections (Ready to Play)
Turn TV on.
See connections a RF Coaxial Cable Connection and b AV Cable Connection on page 12.

  Set TV to channel 3.

Set TV to VIDEO.
[DECK 
➛ ➛➛ ➛
➛ TV]
  Go to “Initial Setup (Ready to Play).” (See below.)
[Cable Box 
➛ ➛➛ ➛
➛ DECK 
➛ ➛➛ ➛
➛ TV], [DSS 
➛ ➛➛ ➛
➛ DECK 
➛ ➛➛ ➛
➛ TV]
  Turn on Cable Box...

17
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Settings are made automatically.
When complete, this screen appears.
If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock (below).
3
If Auto Clock Set was incomplete.
Press ACTION* on remote to display
CLOCK screen.
Press 
 to select the month and SET to
set. In the same manner, select and set
the date, year, time, and DST (Daylight
Saving Time).
Press ACTION to start...

18For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Clock
2)Press  to select
“MANUAL,” and press SET.
(For Auto Clock Set, select
“AUTO CLOCK SET.”)
3) Press 
 and  to
select, then set the date,
time, and DST (Daylight
Saving Time).
4) Press ACTION to 
startClock and exit this
mode.
(“TIME ZONE ADJUST”
appears only when auto
clock is set.)
Language
2)Press SET repeatedly to
change language item as
shown below.
For English For Spanish
For...

19
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH 
/ or
NUMBER keys and press ADD/DLT.
CHANNEL  08  ADDED
CHANNEL  08  DELE TED
Time Zone Adjust
2)Press  to select
“TIME ZONE ADJUST,”
VCR’s Output
Channel
1) Press  to select
“VCR’S OUTPUT CH.,”
and press SET.
2) Press SET.
3) Press ACTION.
After 3 seconds
To Make Corrections,
repeat steps 1) ~ 3).
DST (Daylight Saving Time)
DECK auto adjusts clock for DST.
(p. 17.)...

20For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Playback/ Record on a Tape
Ready Checklist
All connections are made. (pp. 12 ~ 15)TV and DECK are plugged in.TV is on and tuned to CH 3, 4, or VIDEO.Remote is in VCR mode. (Press VCR.)
Insert a tape.
DECK power comes on. If Auto VCR/TV (see
p. 32) is set to “OFF,” press VCR/TV on the
remote for VCR mode.
If tape has no rec. tab (p. 6), auto play begins.
Special Features During Play
1...