Panasonic Dvd Vcr Deck Pv D4732 Operating Instructions

							41
SET : SET NEXT : D I SPLAY
TRACKTRACK:1212V I DEO  CD
PBC : OFF 0 : 12 : 34
SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTERCHAPTER:11110:12:34
1Press DISPLAY in Play or Stop mode
to display “On-Screen Displays.”
When DISPLAY is pressed, On-Screen Displays show
disc information (title/chapter/track number, elapsed
playing time) and DECK information (repeat play, play
mode).
Each press of 
DISPLAY changes the on-screen
display as follows. (refer to p. 42.)
DISPLAY button does not function while DVD
TITLE MENU is displayed.
Note
3
Press 
to select the setting, and
press 
SET.
To make corrections,
press 
 and SET
repeatedly to move to
the error, then correct.
 Pressing  is effective
for elapsing time
instead of the above
buttons. Press 
repeatedly to delete the
error, then correct. For some functions the
setting will be registered
immediately without
pressing 
SET.
When numbers are
displayed (e.g. title
number), 
NUMBER keysare also available.
To return to normal
screen,
press 
CLEAR orDISPLAY repeatedly.

2Press  (or  )
to select 
an item, and
press SET.

Notes
When DISPLAY button is
pressed during playback of a
Video CD with Playback control,
NUMBER keys are not available
on the displayed screen. In this
case, press 
DISPLAY again to
remove the displayed screen.
When 
 appears on the screen
while a button is being operated,
it means that the corresponding
operation is prohibited by DECK
or the disc.
SET NUMBER
keys
DISPLAY
SELECT 
DVD Operation using On-Screen Displays
Selected disc information
Selected DECK information
Normal Screen
CLEAR
SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER:240:12:34
SET : SET NEXT : D I SPLAY
TRACKTRACK:1717V I DEO  CD
PBC : OFF 0 : 12 : 34
Ready Checklist
DECK is in DVD mode, press DVD.
DV D
 Operation
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1341 
						

							42For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DVD Operation using On-Screen Displays (continued)
Detailed Descriptions of each On-Screen Display
  
Disc information screen (for DVD)1. TITLE No.Change the No. by pressing * or NUMBER keys, and press SET.2. Chapter No.Change the No. by pressing  or NUMBER keys, and press SET.3. Disc currently being played
4. Elapsed playing time
The screen may be changed by selecting the elapsed time.
Change the elapsed time by pressing NUMBER keys.
e.g., press 0 - 1 - 2 - 3 - 4 - 5 for 01 : 23 : 45.
This function does not work with some discs.
  
 Disc information screen (for Video CD/ CD)A. Track No.Change the No. by pressing  or NUMBER keys, and press SET.B. Playback control ON/OFF[Video CD with playback control only]
C. Disc currently being played
D. Elapsed playing time
TITLEchapterchapter
chapterCHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
tracktrack
track
TRACK REPEAT
DISK REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
 CHAPTER/TITLE REPEAT PLAY (DVD) TRACK/DISC REPEAT PLAY (Video CD/CD)
For your reference a. Repeat Play
  
 DECK information screen (for DECK)Change the desired mode during play by pressing , and press SET.
For repeat play in VCR mode, see p. 32.
b. Play mode [Video CD/ CD only] (See p. 39 or 40.)
Note
Track No. and the elapsed playing time are not displayed during play started from menu of Video
CDs with playback control.
When 
 appears on the screen while a button is being operated, it means that  the  corresponding
operation is prohibited by DECK or the disc.
O F F Video CD menu play is cleared.  ON Video CD menu play is displayed.
Video CD    CD
Note4
SELECT :  
SET : SET NEXT : D I SPLAY
TITLE:1DVD
CHAPTER : 12 1 : 12 : 551
23
SET : SET NEXT : D I SPLAY
TRACK TRACK:    1V I DEO  CD
PBC : OFF 1 : 35 : 12A
BC
D
Video CD/CD TRACK REPEAT DISC REPEAT REPEAT  OFFDVD CHAPTER REPEAT TITLE REPEAT REPEAT OFF
PROGRAM PLAY program play
RANDOM PLAY random play
          
 ----normal play
SELECT : 
SET : SET END : D I SPLAY
PLAY
CHAPTER REPEAT a
SET : SET END  : D I SPLAY
PLAY
DISC  REPEATRANDOM  PLAYb
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1342 
						

							43
PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00           MP3  MENU  ROOT                   . .               
  VA                       END_WALTZ
  TECHNO             DD_CUB I C
  POPS                  NOCTURNE 
  JAZZ                   NORN
 
DV D
 Operation
1Press POWER on the remote or DECK.
Press 
OPEN/CLOSE,
and then place a MP3 disc into the disc tray.
Press 
OPEN/CLOSE to close.
2
3
MP3 Playback
ROOT
VA
TECHNO
  
POPS
JAZZ
END_WALTZ
DD_CUB I C 
N
OCTURNE
NORN

4
[PLAY MODE]
NORMAL:
All MP3 files are selected and
played back one time only.
SINGLE REPEAT:
The selected MP3 file is
played back repeatedly.
FOLDER REPEAT:
The MP3 files contained in
the selected folder are played
back repeatedly.
However, folders below the
selected folder are not played
back.
DISC REPEAT:
All MP3 files are played back
repeatedly.
Forward/Reverse Search
Press FF/SLOW+ or REW/SLOW- during play.
Press PLAY to release.
Search speed, slow at first, increases with each
additional press of the button up to 4 levels.
Forward/Reverse Track Skip
Press 
SKIP | or | SKIP during play.
Each press skips a track.
If pressed within first 3 seconds of playback, skips
to the previous track. If over 3 seconds, returns to
first of that track. (|
 SKIP only.)
Only the SKIP | or | SKIP button can be used
for track skip selection during playback.
Place unit into Stop mode before performing folder/
file selection (see above right.)
Function
StatusCounter
PLAY MODE
Folder area
File area
Press STOP to stop playing.
5
MP3 playback (During STOP mode)
1)Press 
 to select an MP3 file ().
2)Press 
SET or PLAY to start playback.
Select folder (During STOP mode)
1)Press 
 to select a folder ().
2)Press 
SET to display files/folders
contained in the folder.
Select parent folder (During STOP
mode)
1)Press 
 to select a folder ().
2)Press 
SET to make changes to
the previous directory display.
Select PLAY MODE (During STOP
mode)
1)Press 
  to move cursor to PLAY
MODE.
2)Press 
 to select the desired
PLAY MODE (see below).
You can use this unit to play MP3 format audio recorded for
personal use with a computer etc. onto a CD-R or CD-RW.
Play may not be possible in some cases due to the
condition of the recording.
Parent
folder
Press OPEN/CLOSE to eject the disc.The MP3 MENU is closed automatically.
MP3 Playback Operation
*Important:If a remote control button does not work
when pressed, press the DVD button on
the remote and try the button again.
(The currently
displayed folder
turns green)(The selected
MP3 file/folder
is displayed
with a cursor.)

Folder area operation cannot be done.
Only file area operation is possible.
Note
:MP3 file
:Folder
:Parent folder
MP3 MENU is displayed and playback is
started automatically. (The MP3 CD directory is
displayed.)
(The MP3 CD directory structure
displayed in the above example OSD
is shown in the diagram at left.)
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1343 
						

							44For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
DVD Lock (DVD only)
LEVEL 0 : LOCK ALL, Playback of all DVDs, CDs and
Video CDs is prohibited.
(Use to prohibit play of mature theme DVDs not
encoded with rating level.)
LEVEL 1 : mature  theme DVDs
LEVEL 2 : DVDs expressly for children can be played back.
LEVEL 3 to 7 : DVDs for general audiences/children can be
played back. (DVDs with mature content
are prohibited.)
LEVEL 8 : NO LIMIT: (Factory preset)
All DVDs can be played back.
You can prevent playback of DVDs of a specific
rating level which may be unsuitable for children.
Some DVDs are encoded with a rating level. If the disc
rating is higher (stricter) than the one you preset,
playback will be prohibited.

After DVD Lock is set and a
blocked DVD is played, this
message will appear.
The message may differ
depending on the disc.
To continue viewing a blocked
program for now,
Press 
 to select “YES” and
SET. Then, enter your 4 digit
secret code. When “NO” is
selected, blocked programs
cannot be viewed.
DVD Lock Feature
SELECT : 
SET : SET END : D I SPLAY,
YOUR  SELECT I ON  EXCEEDS  THE
PLAYER  S  RAT I NG  LIMIT.
DO  YOU  WANT  TO  CHANGE  THE
LIMIT?
YES
NO
Discs not encoded with rating
level will play even if the jacket
states it is for mature
audiences. For these discs, the
DVD Lock Ratings will not work.
Caution
4
Press  
to select rating level, and
press SET
to select “LOCKED” or
“UNLOCKED.”
5Press ACTION twice
to end setup.
A 4-digit code must be entered to view a blocked
program or change rating settings.
Press ACTION*
to display MENU.
Press 
to select “PARENTAL LOCK,”
and
press 
SET to display.
2
1)Press NUMBER keys
to enter your secret code.
2) Enter same secret code
again for confirmation.
3)Press 
SET to display.
Step 2) not necessary when
changing rating or secret
code.
Take care that you are not
observed entering the
secret code.To Make CorrectionsPress  repeatedly to
move the cursor.
Press 
NUMBER keys to
make the correction.
Change your secret codeYou will need your current code.
Do step 1 ~ 2 left.
Enter current secret code.
Press 
CLEAR to clear the code.
Do step 4 to enter new code.
DO NOT forget your secret code.
Note
3
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : FIELD
TV  MODE : Letterbox 4:3
PARENTAL LOCK   : LEVEL 8
*Important:If a remote control button does not work when
pressed, press the DVD button on the remote
and try the button again.
Ready Checklist
DECK is in DVD mode, press DVD.
END       : ACT I ONENTER  : 0 - 9 
ENTER  4-D I G I T   CODE----  
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1344 
						

							45
Disc Languages (DVD only)
To select and set the language of the audio
soundtrack, subtitles, or title/DVD menus for all discs
to be played.
“AUDIO” selections(Factory preset: English)To select the audio soundtrack language.English/Spanish/French/Japanese
Original: Original disc language
OTHER ✱✱✱✱: Other language selection*
1
“SUBTITLE” selections(Factory preset: AUTO)To select the subtitle language.AUTO:Same language selected
for “AUDIO”
If language set for “AUDIO” is used in
playback, subtitles will not appear.
If another language is used during
playback, the subtitles will appear
in the language selected at “AUDIO”
setup.
English/Spanish/French/Japanese
OTHER ✱✱✱✱: Other language selection*
1
“MENUS” selections(factory preset: English)
To select the language used in title
menus or DVD menus.
English/Spanish/French/JapaneseOTHER ✱✱✱✱: Other language selection*1
To enter OTHER ✱✱✱✱
      
 code
number,
Press NUMBER keys (Please refer to
language codes on p. 48).
To make corrections, press 
repeatedly to delete language code
number, and correct.
Settings for DVD Operation
1
2
Once initial settings are done, they
remain in memory (even after power off)
until changed. This means DECK will
operate under the same conditions
(especially DVDs) each time.
DISC LANGUAGES (See below)All languages offered on the disc can be set.
If the language not offered is set, the original disc
language will be selected.
AUDIO OUTPUT (See p. 46.)You can set the audio output that comes from the
digital audio output terminal.
STILL MODE (See p. 47.)To select “FIELD” (Field still) or “FRAME” (Frame
still) to prevent jitter or make small text or fine
patterns clearly visible in a still picture. When
“AUTO” is set “FIELD” or “FRAME” is selected
automatically.
TV MODE (See p. 47.)To select whether the video material for a wide-
screen will be played back in the Pan & Scan style,
Letterbox style or 16 : 9 style.
3
Press 
to select
“DISC LANGUAGES,”
and
press 
SETto display screen. Press 
ACTION
to display MENU.
Press 
to select an item, and
press 
SET.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I ONDISC  LANGUAGESAUD I O  OUTPUT
ST I L L   MODE : AUTOTV  MODE : Letterbox 4:3PARENTAL LOCK :LEVEL 8
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I ONDISC  LANGUAGESAUD I O  OUTPUT
ST I L L   MODE : AUTOTV  MODE : Letterbox 4:3PARENTAL LOCK :LEVEL 8
Press 
to select an item, and
press 
SET repeatedly
for desired language.
(Please refer right.)4
D I SC  LANGUAGES
SELECT :  
SET : SET
END : ACT I ONAUDIO: EnglishSUBT I TLE : AUTO
MENUS : English
5
Press ACTION to redisplay DVD menu
and go to step 2 to setup another item.
Or, press 
ACTION twice to exit.
*1If the selected language is not offered,
the original disc language is selected.
SET ACTION
SELECT 
NUMBER
keys
CLEAR
Ready Checklist
DECK is in DVD mode, press DVD.
DV D
 Operation
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1345 
						

							46For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Make settings according to amplifier
connected to optical audio output as shown
in above table.
When a dts decoder is not connected, to
enjoy dts DVD, please select audio output
other than dts at the dts DVD menu screen.
Otherwise, there will be no sound.
*1 Audio Output 2 from DECK is converted to
48 kHz/16 bit in addition to audio from
digital audio output.
To enjoy high quality sound at 48 kHz/20
bit /24 bit or 96 kHz, connect the amplifier
or decoder directly to the Audio Output 2
connectors, not to the Digital Audio Output
connector. [Select “OFF” at the “LPCM
(DVD)”.]
*2 When connecting an amplifier (with an
optical digital input connector) which does
not contain the Dolby Digital or dts
decoder, be sure to select “OFF”.
If “Bitstream” is selected, starting DVD play
may cause such a high level of noise as to
be harmful to your ears and damage the
speakers.
*3 When a dts decoder is connected, please
select “Bitstream” in “dts”. If “OFF” is
selected, there will be no sound.
Audio Output
Select the digital output to be output from the optical
digital audio output connector of DECK.
  
 “LPCM (DVD)” selectionsOFF:Linear PCM of less than 48 kHz/16 bit is
output. When playing DVDs recorded in
linear PCM of over 48 kHz/20 bit or 96 kHz,
no digital audio is output. (Factory preset)
PCM:When playing DVDs recorded in linear PCM
of 48 kHz/20 bit/24 bit or 96 kHz, digital
audio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright
protection.)
  
 “Dolby Digital” selectionsBitstream:Dolby Digital bitstream (1ch-5.1ch) is
output. (Factory preset)
OFF:No output.
  
 “dts” selectionsBitstream:dts bitstream is output. (Factory preset)
OFF:No output.
  
 “DRC (Dynamic Range Compression)” selectionsOFF:Nor mal audio range is selected. (Factor y
preset)
ON:For dynamic sound even at low volume, this
is useful for late-night listening. [Dolby Digital
DVDs only].
  
 “SURROUND” selectionsSurround Sound creates the effect of sound coming
from non-existent rear speakers even when only
connected to a 2-channel stereo system.
OFF:No Surround Sound effect. (Factory preset)
ON:Surround Sound effect.
Press 
to select an item,
and
press 
SET
repeatedly for
output. (See below.)
Press to select
“AUDIO OUTPUT,”
and
press 
SET
to display screen.
1
Settings for DVD Operation (continued)
3 2
4
Turn off other surround effects when using
this surround effect.
For optimum effect, the distance between
DECK and the listener should be about 3 or 4
times the distance between the right and left
front speakers.
Notes
Recommended setting
LPCM
(DVD)
OFF
PCM*
1
PCM*1
PCM*1
Dolby
Digital
OFF
OFF*
2
Bitstream
Bitstreamdts
OFF
OFF*
2
OFF
Bitstream
No amplifier is connected
AV amplifier (with digital
audio input connector)
without Dolby Digital/dts
decoder
AV amplifier including
Dolby Digital decoder
AV amplifier including
Dolby Digital/dts decoder
*3
   Type of amplifier
   to be connected
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUAUDIDIO  OUTPUTO  OUTPUTST I L L   MODE : F I LED
TV  MODE : L e t t e r b o x   4 : 3PARENTAL LOCK :LEVEL 8
AUD I O  OUTPUT
SELECT :  
SET : SET
END : ACT I ONLPCM(DVD)LPCM(DVD): OFF: OFFDolby  Digital : Bitstream
d t s : OFF
DRC : OFF
SURROUND : OFF
Press ACTION to redisplay DVD menu
and go to step 2 to setup another item.
Or, press 
ACTION twice to exit. Press 
ACTION*
to display MENU.
Ready Checklist
DECK is in DVD mode, press DVD.
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1346 
						

							47
Still Mode
1
Press to select “STILL MODE,”
and
press 
SET repeatedly
for mode. (See below.)
2
AUTO :“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD:“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AU TO” on some discs.
TV Mode
1
Press to select “TV MODE,”
and press SETrepeatedly for mode.
(See below.)
2
Pan & Scan 4 : 3 (Factor y preset) :
Wide-screen video data is played in Pan & Scan
style (left and right of screen is trimmed.)
Video data not formatted in Pan & Scan will play
in letterbox style.
Letterbox 4 : 3 :
Wide-screen video data is played in Letterbox
style (top and bottom of screen has black margin).
16 : 9 :
Set “16: 9” when using Wide-screen TV. Set the screen display style for wide-screen video
material playback.
Pan & Scan (Factory preset)
Letterbox
Set to reduce jitter in a displayed still picture or a motion
picture.
3Press ACTION
to exit this mode.
Press ACTION
to exit this mode.3
Example
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
STITILLLL  MODE  MODE: F I ELDELDTV  MODE : L e t t e r b o x   4 : 3PARENTAL LOCK :LEVEL 8
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : F I LED
TV  MODETV  MODE: Letterbox 4:3Letterbox 4:3PARENTAL LOCK :LEVEL 8
*Important:If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
SET ACTION
SELECT 
Press ACTIONto display MENU.
Press 
ACTIONto display MENU.
DV D
 Operation
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1347 
						

							48For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Language Code List
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or
“MENUS” (see p. 45).
   CodeLanguage
7079Faroese
7082French
7089Frisian
7165Irish
7168Scots Gaelic
7176Galician
7178Guarani
7185Gujarati
7265Hausa
7273Hindi
7282Croatian
7285Hungarian
7289Armenian
7365Interlingua
7378Indonesian
7383Icelandic
7384Italian
7387Hebrew
7465Japanese
7473Yiddish
7487Javanese
7565Georgian
7575Kazakh
7576Greenlandic
7577Cambodian
7578Kannada
7579Korean
7583Kashmiri
7585Kurdish
7589Kirghiz
7665Latin
   CodeLanguage
7678Lingala
7679Laothian
7684Lithuanian
7686
Latvian, Lettish
7771Malagasy
7773Maori
7775Macedonian
7776Malayalam
7778Mongolian
7779Moldavian
7782Marathi
7783Malay
7784Maltese
7789Burmese
7865Nauru
7869Nepali
7876Dutch
7879Norwegian
7982Oriya
8065Panjabi
8076Polish
8083
Pashto, Pushto
8084Portuguese
8185Quechua
8277
Rhaeto-Romance
8279Romanian
8285Russian
8365Sanskrit
8368Sindhi
8372
Serbo-Croatian
8373Singhalese
   CodeLanguage
8375Slovak
8376Slovenian
8377Samoan
8378Shona
8379Somali
8381Albanian
8382Serbian
8385Sundanese
8386Swedish
8387Swahili
8465Tamil
8469Telugu
8471Tajik
8472Thai
8473Tigrinya
8475Turkmen
8476Tagalog
8479Tonga
8482Turkish
8484Tatar
8487Twi
8575Ukrainian
8582Urdu
8590Uzbek
8673Vietnamese
8679Volapük
8779Wolof
8872Xhosa
8979Yoruba
9072Chinese
9085Zulu
   CodeLanguage
6565Afar
6566Abkhazian
6570Afrikaans
6577Ameharic
6582Arabic
6583Assamese
6588Aymara
6590Azerbaijani
6665Bashkir
6669Byelorussian
6671Bulgarian
6672Bihari
6678
Bengali; Bangla
6679Tibetan
6682Breton
6765Catalan
6779Corsican
6783Czech
6789Welsh
6865Danish
6869German
6890Bhutani
6976Greek
6978English
6979Esperanto
6983Spanish
6984Estonian
6985Basque
7065Persian
7073Finnish
7074Fiji
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1348 
						

							49
These displays will alert you to a missed operation or provide further instructions.
Warning and Instruction Displays
For Your
Information
PLEASE SET CLOCK BY
PRESSING ACTION KEY
CHECK CASSETTE
RECORD TAB
NO CASSETTE
VIDEO HEADS MAY NEED
  CLEANING PLEASE INSERT
  HEAD CLEANING CASSETTE
OR REFER TO MANUAL
END      : PLAY
VCR LOCK ACTIVATED
PageCaution OSD
If you attempt to set or review a Timer
Recording and the Clock is not set...
If DECK is not in Stop mode or a cassette
with record tab is not inserted 2 minutes
before a Timer Recording is about to
begin...
If you press REC on the remote control or
DECK, and a cassette is inserted with no
record tab...
If you press PLAY, FF, REW, or REC on
the remote control or DECK without a
cassette inserted...
If you press STOP or POWER
during a Timer Recording...
(visible in VCR mode only)
If head cleaning becomes necessary
while playing back a tape...
If you press a function button other than
STOP/EJECT or POWER while DECK is
in VCR Lock mode...
If you press an invalid key on the remote
while in CABLE/DSS mode...
If you press an invalid key on the remote
while in TV mode...
REMOTE CONTROL IS SET
TO TV MODE
USE VCR : VCR KEY
USE DVD : DVD KEY REMOTE CONTROL IS SET
TO CABLE/DSS MODE
USE VCR : VCR KEY
USE DVD : DVD KEY
PLEASE PREPARE FOR TIMER
REC
PLEASE CHECK THE DISC,
AND FOR STAINS OR
SCRATCHES ON DISC
If you press PLAY, or DECK reads
data from a stained or scratched disc
in DVD mode. Also, if the type of disc
is other than DVD, Video CD or CD...
IT IS PROHIBITED TO COPY
DVD/VIDEO CD/CD TO VHSIf you press REC in DVD mode...
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPROX 3 SEC
24
24
25
6
20
21
25
6
33
28
29
34
4
21 28
29
34
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1349 
						

							50For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before Requesting Service
Power
No power…
Power turns itself off...
Recording & Playback
TV program cannot be recorded...
Timer recording cannot be
performed…
There is no playback picture, or the
playback picture is noisy or contains
streaks...
During Special effects playback,
picture may contain some vertical
jitter when using a TV with an
Automatic Vertical Hold Control...
DECK cannot be controlled...
Check the following points if you are having trouble with your DECK.
Correction
Completely insert Power Plug into an AC outlet.
Set POWER button to on.
Make sure power source is active.
Auto power-off (shutoff) occurs after about 5 min.
in DVD mode with no operation, or if there is no
broadcast signal in TV or Playback mode.
Turn the power back on. (pp. 23, 33)
Correction
Check connections between DECK, external
antenna, and TV.
Check channel selections.
Make sure your antenna system (CABLE or TV) is
correctly set. (Channels [p. 18])
Make sure cassette record tab is intact. (p. 6)
Confirm that clock is set to current time and date.
Make sure Cable/DSS box (if used) is left on and
tuned to channel to be recorded.
Set recording start/stop times correctly. (p. 24)
Timer recording may not be performed or continued
if a power interruption occurs before or during a
Timer Recording, even after power is restored.
Select channel 3 or 4 on TV to match VCR output
channel (3 or 4) (p. 16) or select LINE.
Set VCR/TV selector to “VCR.”
Adjust TRACKING control in either direction. (p. 6)
Try Head Cleaning. (p. 6)
Set TV’s Vertical Hold Control to MANUAL, then
adjust.
Make sure DECK power is on.
Check Remote batteries.
Make sure VCR LOCK is set to off. (p. 33)
Make sure Remote is in proper mode.(p. 28)
Make sure Timer Recording is not in progress.
Remote Control
DECK cannot be remote controlled...
PROG buttons do not respond...
Correction
Make sure DECK power is on.
Make sure Remote is in VCR mode.

Aim Remote Control directly at remote sensor on DECK. (p.9)Avoid any object blocking signal path.
Check Remote batteries. (p. 4)
Exposing DECK remote sensor to direct fluorescent
or outdoor light may cause signal interference.
PROG functions are not available in COMPONENT
Video Output and S-VIDEO OUT. Set TV to either RF
IN or VIDEO IN. (p. 10)
Check Remote batteries. (p. 4)
Press VCR or DVD button for DVD/VCR mode. (p. 28)
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1350