Panasonic Dvd Vcr Deck Pv D4732 Operating Instructions

							31
NUMBER
keys
 Auto Play
Insert a tape ➛ Power comes on,
➛ Play starts if there is no record tab
(see p. 6).
 Auto Rewind
Play
Fast Forward
 Play Auto Eject
(Repeat Play must be off)
Play 
➛  ➛ ➛  ➛ 
➛ Tape end ➛  ➛ ➛  ➛ 
➛ Rewind
➛  ➛ ➛  ➛ 
➛ Tape ejects if there is no record tab
Auto Operation Functions
Commercial Skip
VCR fast forwards (skips) over 1~3 minutes
of recorded tape.
1
Press CM/ZERO in Play mode.
    PLAY
1st  Press
2nd Press
3rd  Press1 min Skip
2 min Skip
3 min Skip
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
No indication appears on-screen. The skip time can be changed by
pressing CM/ZERO repeatedly as
shown by the figure below.
REW/SLOW-
FF/SLOW+ PLAY
SEARCH
CM/ZERO
STOP
VCR
 Operation
➛ Tape end ➛ Rewind
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1331 
						

							32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
Repeat Play
Set to playback a recording over and over.
Zero Search
To quickly return to a specified tape location.
Continue to record, playback etc.
Press STOP.
DECK will go into FF or REW mode and stop
at the last point the Counter was set to 0:00:00.
5 4 3 2 1 32 1
SELECT :              EXIT         : ACTION    SET : SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
PLAY       1 2 : 0 0AM 0 : 0 0 : 0 0 SP
COUNTER
RESET Press ACTION*
to display MENU.
Press 
to select “SET UP VCR,” and
press SET.
Play repeats at tape end or if unrecorded portion
over 30 sec. is detected.
Press ACTION twice
to return to normal screen.
Press DISPLAY during play
to display Counter.
Press COUNTER RESET
at desired position to reset
to “0:00:00”.
Press CM/ZERO in Stop
mode to start Zero Search.DISPLAY ACTION
SET
CM/ZERO
4
Press 
to select “REPEAT PLAY,”
and press SET
to set “ON” or “OFF.”REPEATREPEAT  PLAY                   : OFFREMOTE  WARN I NG            : ONAUTO  SHUT-OFF               : OFF
SELE
CT :                 SET: SETEND       : ACT I ON     
   SET  UP  VCR  
STOP
SELECT
 
Note
For repeat play in DVD mode, see page 42.
REW        1 2 : 3 0AM          CH  02 0 : 30 : 30 SP
STOP       1 2 : 3 1AM          CH  02 0 : 0 0 : 0 0 SP
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1332 
						

							33
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF:Screen turns solid blue when signal is weak or
non-existent.
Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION twice
to return to normal screen.
4 3 2
Press 
to select “SET UP
CHANNEL,” and
press SET.
Press 
to select “WEAK SIGNAL
DISPLAY,” and
press SET
to set “ON” or “OFF.”
SELECT :              EXIT         : ACTION    SET : SET
                MENU
SET  UP  VCR
SET  CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
ACTION
SET
1Press ACTION
to display MENU.
SELECT :                 SET: SETEXIT       : ACT I ON    
ANTENNA  :   CABLE
AUTO   SETWEAK  S I GNAL  D I SPLAY:OFF
SET  UP  CHANNEL
Special VCR  Features
SELECT 
*Important:If a remote control button does not work
when pressed,  press the VCR button
on the remote and try the button again.
When set to ON, all operations
except for timer record and tape
eject are prohibited. Useful for
households with small children.
VCR Lock Feature
VCR  LOCK  ACT I VATED
VCR  LOCK  OFF
VCR Lock cancels in 24 hours if
clock is set.
To turn off, repeat above. To turn on, hold down REC on
DECK in Stop mode with no
tape inserted for 7 seconds.
(Please ignore “NO CASSETTE”
warning.)
REC
Auto Shut-Off Feature
The power shuts off at a preset time.
3 1
4
Press 
to select “AUTO SHUT-OFF.”
Press SET repeatedly to
change shutoff time as
shown below.
Press ACTION twice
to return to normal screen. Press ACTION
to display MENU.
2
SELECT :              EXIT         : ACTION    SET : SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3Press to select “SET UP VCR,” and
press SET.
REPEAT  PLAY                : OFFREMOTE  WARN I NG         : ONAUTO  SHUT-OFF            : OFF
SELE
CT :                   SET: SETEXIT       : ACT I ON   
SET  UP  VCR
OFF
2 Hours
6 Hours4 Hours
The shut-off countdown will not function during Play or
Record.
Note
VCR
 Operation
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1333 
						

							34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Special VCR Features (continued)
INPUT
ACTION
SET
TAPE
POSITION
SELECT 
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV, DSS or CABLE mode.
4 31
If “OFF,” remote warning will not appear
when invalid key is pressed.
Press ACTION*
to display MENU.
Press 
to select
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
Press ACTION twice
to return to normal screen.
Remote Warning Feature
2
Press 
to select “SET UP VCR,”
and
press SET.
SELECT :              EXIT         : ACTION    SET : SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S  OUTPUT  CH:3
REPEAT  PLAY                   :  OFFREMOTE  WARN I NG            :  ONAUTO  SHUT-OFF               :  OFF
SELE
CT :                 SET: SETEXIT       : ACT I ON    
SET  UP  VCR
*Important:If a remote control button does not work
when pressed,  press the VCR button
on the remote and try the button again.
PAUSE/
STILLSTOP
REC
To find out the present tape position and amount of tape remaining.
Tape position is displayed for VHS-C type Cassettes, tapes
under 30 minute long, and some other tapes, but the
position is not correct.
Tape remaining time display may not be
precise.
1
BEG I N                END
                                                SP
                                 R 120 M
 I  N.
“DETECTING TAPE POSITION” is displayed
only when a cassette is first inserted, and it
takes several seconds for correct tape
position to appear.
Tape Position and Tape Status Feature
Press TAPE POSITION
to return to normal screen.
2
The present tape position indication and
amount of tape remaining (according to
tape speed) is displayed.
DETECTING   TAPE   POSITION
Press TAPE POSITION
to detect current tape position.
This function cannot display exact amount of tape remaining for
tapes 30 minutes or less, or for tapes over 120 minutes in length.
Note
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1334 
						

							35
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then PAUSE/STILL
immediately to enter REC/PAUSE
mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
4
Press PLAY to start dubbing.
Playing VCR starts playback.Press PAUSE/STILL to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
Please note that some tapes cannot be dubbed on DECK. Also, it is not
possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.
Playing (Source) VCRRecording (Editing) DECK
5
To Monitor Dubbing on  TV
1Turn TV on and tune to the Recording
VCR channel (CH 3 or CH 4).
2Set the VCR/TV Selector on DECK to
“VCR.”
NoteDubbing tapes protected with Copy
Guard will result in poor quality
recordings.
Connection
Press STOP to stop dubbing. Press PLAY, then PAUSE/STILL
immediately to enter PLAY/PAUSE
mode.
The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.
Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R”
AUDIO IN terminals on DECK.
In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to DECK.
 Selecting the Input Mode
Method 1:Press INPUT repeatedly.Channel Number 
↔ ↔↔ ↔
↔ LINE1 
↔ ↔↔ ↔
↔ LINE2Method 2:Press CH /.
Display will change as below.
Front of DECK
 VIDEO IN 2L-AUDIO IN2-R
(Audio/Video In Terminals
on the front of DECK are
available)
IN FROM ANT.
OUT
 TO TV
IN 1
VHF/UHF
OUT
TV
OUT
VHF/
UHF
DVD/VCR DECK
 VIDEO
 AUDIO
1L
R
VCR/ Camcorder (Hi-Fi)
 VIDEO
 AUDIOL
R
“L1” or “L2” lights up on Multi Function Display
(about 4 seconds) when LINE1 or LINE2 is selected.
LINE1:  For rear audio/video connection.
LINE2:  For front audio/video connection.
1
2
VCR
 Operation
1
23
125
LINE1(CABLE)69(TV)orLINE2Press
Press
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1335 
						

							36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
AUD I O :3  ESP3  ESPDolby  Digital  3/2.1ch
SELECT
SELECT:  SESET:T:SETSET
Hola
AUD I O :1  ENG1  ENGDolby  Digital  3/2.1ch
SELECT
SELECT:  SESET:T:SETSET
Hello
ESPESP
Te amoTe amo
If after several presses of the button the language does not
change, language selection is not offered on the disc.
When power is turned on again or disc is removed, subtitles
revert to initial setting language. If the initial language is not
recorded on the disc, the disc’s priority language will appear. You can select a different subtitle language (if offered) than
the one set at the Settings for DVD Operation.
(See p. 45.)
Press 
to select a language.
Press  (or  )
to set.
Press 
to select “ON” or “OFF.”
Subtitle Language (DVD only)
Display disappears after
5 seconds.
When no subtitles are offered,
“-” will be displayed instead of
the language number.
Press SUB TITLE*
in Play mode to display
the subtitle selection
on-screen.
ENG
FRA
DEU
ITA
ESP
NLDEnglish
French
German
Italian
Spanish
Dutch
SVE
NOR
DAN
POR
RUS
JPNSwedish
Norwegian
Danish
Portuguese
Russian
Japanese
CHI
KOR
MAL
VIE
THA
 ∗
Chinese
Korean
Malay
Vietnamese
Thai
Other
[Subtitle language (No.)]
[Audio sound track language (No.)]
Change the No. by pressing ,
and press SET.
Ready Checklist
Please read “Basic DVD Operation”
on p. 22.
You can change the audio soundtrack language, selected
at the Settings for DVD Operation, to a different language
if available. (See p. 45.)
(This operation works only with discs on which multiple
audio soundtrack languages are recorded.)
Press AUDIOin Play mode to display the
audio selection on-screen.
Audio Soundtrack Language (DVD only)
Audio attribute 1 type,
sampling frequency, bit No. of
the disc.
[Audio attribute 1 type, sampling
frequency, bit No. of the disc (see
p. 46.)]
Disc Operation
1
2
1
2
Number of subtitle language being played back.
Press 
to select desired language.
Number of the audio soundtrack
language being played back.If, after several presses of the
AUDIO button the language does not
change, language selection is not
offered on the disc.
When power is turned on again or
disc is removed, language reverts to
initial setting. If this language is not
recorded on the disc, the language
recorded will be heard.
LPCM
Dolby Digitaldts96KHz
or
48KHz
1ch - 5.1ch
1ch - 5.1ch16bit
20bit
24bitLinear PCM disc
Dolby Digital disc
dts disc
Notes
Notes
Display disappears after
5 seconds.
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1336 
						

							37
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
The ANGLE Indicator lights up on
DECK when a scene recorded
at different angles is detected.
The angle number can be set
beforehand so that the angle is
switched whenever the ANGLE
Indicator lights up.ANGLE Indicator
 DVD Karaoke (1 vocal)   VOCAL ON     VOCAL OFF
 DVD Karaoke (2 vocals) VOCAL V1 +
 V2    VOCAL V1    VOCAL V2    VOCAL OFF 
 Video CD                        LR     L     R
1Press AUDIO in Play mode
to display the audio screen.
Vocal Selection for Karaoke Discs (DVD/Video CD)
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at different
angles. You can view these angles, if available, using the
ANGLE button.
1
Press ANGLE
in Play mode to display the
angle selection on-screen.
Display disappears after
5 seconds.
Multiple Angle Viewing (DVD only)
2Press 
to select the desired
angle.
2
Press  (or  )
to select as shown below,
and
press 
 (or ) to set.
(DVD only)
Number of angle being played back.
ANGLE : 1
SELECT:  SET:SET
SELECT :   SET : SET
AUDIO:2 ENG VOCAL ONVOCAL ON
You can enlarge specific portions of a picture and
select the zoom ratio using the ZOOM button during
DVD playback.
Press ZOOM repeatedly to change display
as follows.
Picture Zoom (DVD only)
You can enlarge the center portion of the image
to one of 2 magnifications.
The subtitle cannot be enlarged nor
can it’s position be changed.
The picture zoom feature does not
work with a Video CD.
During picture zoom, “ZOOM1” or
“ZOOM2” is displayed on-screen.
Zooming, on some discs, may result
in poor picture quality, or may not
operate at all.
Use the , ,  and   buttons to move the position
up, down, left and right.
Notes
Notes*Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
AUDIO SET
ANGLE SUB TITLE
ZOOM
SELECT DV D
 Operation
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1337 
						

							38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Some DVDs have more than one title, e.g. movies.
If the disc offers a title menu, you can select the desired
title number. (Operation may vary according to the disc.)
1
Press TITLE*
in Play mode
to display the title screen.
Title Menu (DVD only)
DVDs may offer a special menu. This menu may include
guides to unique contents, audio/subtitle languages, etc.
Although contents and operation may vary, the following
steps show basic steps for using the menu.
1
2Press MENUin Play mode to display
DVD MENU.
Press 
  or
NUMBER keysto select an item, and
press 
SET or PLAY
to perform.
DVD Menu (DVD only)
2Press   orNUMBER keys
to select a title, and
press 
SET or PLAYto start playing.
Disc Operation (continued)
“Pressing SET or PLAY” is
not necessary when using
NUMBER keys.
  
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
DVD MENU
3 . ANGLE
1 . SUBT I TLE
2 . AUD
 I O
DVD MENU
3 . ANGLE
1 . SUBT I TLE
2 . AUD
 I O
B i rds
of  the  world

Repeat step 2 if there is
more than one menu. “Pressing SET or PLAY” is
not necessary when using
NUMBER keys.
MENU
SET STOP PLAY
NUMBER
keys
TITLE
CLEAR
ACTION
SELECT 
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1338 
						

							39
You can program specific tracks and order of play.
Program Play (Video CD/CD)Ready Checklist
DECK is in DVD mode, press DVD.
Video CD or CD is inserted.
1Press ACTION
to display MENU.
2Press to select
“PLAY MODE,” and
press 
SETto display.
3
Press to select
“PROGRAM PLAY,”
and
press 
SET to display.
5
Press  
to select “START,” and
press SET to start play
of programs in the
sequence selected.
To cancel, press STOPduring play, then pressCLEAR.
4Press  
to select a track
number (Track
numbers on disc are
displayed.), and
press 
SET.
Repeat step 4 to select another track.
The selected track is added on the right side.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : F I E L D
TV  MODE : L e t t e rbox 4:3
PARENTAL LOCK :LEVEL 8PLAY  MODEPLAY  MODE
PLAY  MODE
SELECT :  
SET : SET
END : ACT I ONPROGRAM  PLAYPROGRAM  PLAYRANDOM  PLAY
SELECT :  
SET : SET
END : ACT I ON
D I SC PROGRAM
161116 5 8
2 7 12 17 15 6
3 8 13 18 1 13
4 91419 3 2
5101520 2
     
CLEAR  LAST
CLEAR  ALLSTART PROGRAM  PLAY
PROGRAM  PLAY
SELECT :  
SET : SET
END : ACT I OND I SC PROGRAM
161116 5 8
2 7 12 17 15 6
3 8 13 18 1 13
4     9  14 19 3 2
5101520 2
      
CLEAR  LAST
CLEAR  ALL START
Notes
Program Repeat Play
(Video CD/CD)
4Press SET to enter Select mode.
“REPEAT OFF” will flash.
5Press  to select “DISC
REPEAT.”
(DECK Information Screen) (DECK Information Screen)
1Do operation steps 1 through 5
at left on this page.
2Press DISPLAY to display Disc
Information screen.
(Disc Information Screen)
3Press DISPLAY to display
DECK Information screen.
6Press SET to set mode. (“DISC
REPEAT” will stop flashing.)
To cancel, select “REPEAT
OFF” in step 5, then press SET.
SELECT : 
SET : SET END : D I SPLAY
PLAY
DISC REPEATDISC REPEATPROGRAM PLAY 
SET : SET END  : D I SPLAY
PLAY
REPEAT  OFFREPEAT  OFFPROGRAM  PLAY
SET : SET NEXT : D I SPLAY
TRACKTRACK:    1V I DEO  CD
PBC : OFF 1 : 35 : 12
*Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Up to 15 tracks can be programmed.
“
 ” or “ ” (depending on disc) indicates additional
PROGRAM PLAY screen.
Press 
  for next or previous screen.
To clear the last program one by one
Press 
  to move to “CLEAR LAST” and
press SET. (Pressing CLEAR on remote control
also clears last program.)
To clear all programs
Press 
  to move to “CLEAR ALL” and pressSET. (Programs are also cleared when the power
is turned off or the disc is removed.)
DV D
 Operation
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1339 
						

							40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tracks are played in a random order.
Random Play (Video CD/CD)
Press ACTION*
to display MENU.1
Disc Operation (continued)
Pess to select “PLAY MODE,”
and
press 
SETto display.
2
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : F I E L D
TV  MODE : L e t t e r b o x   4 : 3
PARENTAL LOCK :LEVEL 8PLAY  MODEPLAY  MODE
Press 
to select
“RANDOM PLAY,” and
press 
SET
to begin random play.
To cancel, press STOPduring play, then pressCLEAR.
3
PLAY  MODE
SELECT :  
SET : SET
END : ACT I ONPROGRAM  PLAY
RANDOM  PLAY
*Important:
If a remote control button does not
work when pressed, press the
DVD button on the remote and try
the button again.
SELECT 
STOP
CLEAR
ACTION
SET
AUDIO
CONTROL
Ready Checklist
DECK is in DVD mode, press DVD.
Setting the Sound Output Level
Press AUDIO CONTROL repeatedly to change “ON” 
↔ ↔↔ ↔
↔ “OFF.”
“ON” or “OFF” lights up on Multi Function Display (about 3 seconds) when
press AUDIO CONTROL.
DVD /Video CD
Music CDAudio Control “OFF”
Volume level is low.
Audio Control “ON”
Volume level is increased
automatically when played back.
“ON” is set ..... When a DVD or Video CD is played back, the average volume is increased.
“OFF” is set .... The volume level recorded on the disc is played back just as it is.
When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.”
Notes
Audio recorded on a DVD or Video CD often incorporates
a dynamic range of sound.
This means that, when compared to a music CD, etc.,
the average volume is generally lower and the peaks
may be higher. This unit can be set so that the average
volume is increased automatically.
PV-D4732S P36-60 (2nd) [LSQT0618B].p65 2002/05/23, 18:1340