Panasonic DP 8035 User Manual

21
FacsimileFeatures
Print Co m m. Journal?
4
Print Communication Journal.
(COMM. JOURNAL) T
ransmission stops.
5
Downloaded From ManualsPrinter.com Manuals 

22
Facsimile Features
■ 2-Sided Transmission
Letter or A4 Original(s) are placed in a Portrait () direction, the document(s) will be rotated by 90° and then transmitted in
a Landscape (
) direction. The document(s) will be printed the same size as the transmitted originals at the Receiving
Station.
Rotation XMT Fax Parameter No. 078 (Rotation XMT) set to:
• Invalid
Letter or A4 Original
(Portrait)SendsReceiving Station:
Prints on Letter or A4 Size
(70% Reduction)
This machine has duplex SCAN & PRINT...

23
FacsimileFeatures
• Valid  (Default Position)
Sends with Rotated
Transmission Receiving Station:
Letter or A4 Paper
Scanning Direction
Scanning Direction
A4/Letter
A4/Letter
Set as Portrait
Set as Landscape
Downloaded From ManualsPrinter.com Manuals 

24
Facsimile Features
NOTE1. If you need a special access number to get an outside line, dial it firs\
t then press Pause key to enter a
pause (represented by a -) before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press 
key (represented by a /).
The dialling mode will change from Pulse to Tone after dialling the digit /.
Ex: 9 PAUSE * 5551234
Sending Documents
■ On-Hook Dialling
1
or
3
You will hear...

25
FacsimileFeatures54
T elephone number
 • Transmission
starts immediately
on scanning.
Downloaded From ManualsPrinter.com Manuals 

26
Facsimile Features
■ Automatic Reception
■ Manual Reception
Machine receives documents automatically.
Receive Transmit
You may wish to receive documents manually if you use the telephone line in your office primarily as a personal telephone, and
occasionally for your facsimile machine.
Transmit
ReceiveTo receive documents manually, change the
Fax Parameter No. 017 (Receive Mode) to
Manual.
(See page 168)
1234
Rings Lift the handset Remove any documents
from the ADF or Platen
Glass.
NOTE1. If the...

27
Facsimile
Features
■ Print Reduction Setting
■ Substitute Memory Reception
Transmitted Document Received Document
Oversized documentsReduce within paper
size
If the recording paper runs out,
jams, or if the toner runs out
during reception, the machine
automatically starts receiving
documents into its image data
memory. Stored documents are
printed automatically after
replenishing the recording
paper, or toner.
(See notes 2 and 3)
NOTE2. If the memory overflows, the machine will stop receiving, and...

28
Facsimile Features
■ General Description
Timer Controlled Communications
You can send document(s) to one, or multiple stations at any preset tim\
e within the next 24 hours.
Up to 50 built-in timers can be set for deferred communication.
■  Deferred Transmission
Receive
Store document(s)
in memory
1
(To use the Platen Glass,
see page 17.)
or
2
5
Start time
(4-digit, 24-hour clock)
2T ransmit
1Calling at
predetermined
time
NOTETo  change or cancel the Deferred Communication settings, see pages 120, 12\...

29
Facsimile
Features
BERLIN ANTARTICA
34
7
 • To cancel a choice, select the same destination again.
 • For transmission to additional destinations, continue
pressing the relevant keys.
 • Select “DESTINATIONS” to confirm your designated
destinations. (See page 62)Document(s) are stored into memory.
 •A communication journal is printed if the transmission
fails for any reason. (Ex: Remote station was busy)
(See page 176)
 • Press Stop key to return the machine to the initial
screen of the current active...

30
Facsimile Features
■ Deferred Polling
1
BERLIN
ANTARTICA
2
5
Polling password
(4-digit)
_
2
Receive
1Calling at
predetermined
time
Store document(s)
in memory
Timer Controlled Communications
NOTETo  change or cancel the Deferred Communication settings, see pages 120, 12\
2.
 • For instruction on how to use polling without a pre-
programmed time, see page 36.
 • If you have set the polling password in Faxparameter No. 026 ( Polling Password), the
password will appear on the display. You can
still...