Panasonic DP 3530 User Manual
Have a look at the manual Panasonic DP 3530 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 Making Copies To recall a job stored in memory M1, M2, M3, M4, M5 or Number of Copies (Max. 999) 123 NOTE●When using the double exposure mode, the M5 is turned On and other job requiring memory cannot be used. ●The default setting of Double Exposure Mode is ON in the Copier Settings 19 Double Exposure. If this setting is changed to “OFF”, this mode cannot be used. Number of Copies (Max. 999) 34 NOTE If “2: NO” is selected, the machine will start copying only scanned original. 5 7The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See page 48) 1: YES Continues to copy another original, repeat steps 1 and 3- 2 to step 6. 2: NO Starts making copies. (See NOTE on page 60) Downloaded From ManualsPrinter.com Manuals
62 Making Copies Other Features ■ Concurrent Copying The next copy job can be reserved even if the current copy job is not completed. (Requires the optional Hard Disk Drive (See page 81) to be installed) 1st job1st job 2nd jobReserve Copy 2nd job 1st job orSelect Function ■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode) ■ Skyshot Mode Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened. Two types of Skyshot modes can be selected: 1) Digital Skyshot Mode : The scanning area (size) is not pre-determined. 2) Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance. Digital Skyshot Mode The Digital Skyshot has 2 modes ( copy or copy ). The default setting of Digital Skyshot Mode is “Freeshp”. Before using this mode, select each setting by using the Function setting. No:None Freeshp (Free shape):Copy is made with a slant. copy Parallel:Copy is made in a straight line. copy (within 5 degrees) (See page 67) Set original on Platen Glass Number of Copies (Max. 999) NOTE∗Sleep Mode/Shutdown Mode and timer setup is performed in the key operator mode. (See page 70) ●An incorrect exposure may occur when there is a black line at the edge of the original or an image which the copier interprets as a black pattern in the skyshot mode. These modes save power while the copier is not in use. Power Save Mode Enter Sleep/Shutdown Mode∗ Automatically enters the Sleep/ Shutdown Mode after 15 minutes from the last copy job. To clear or 1 2 12 21 ●Power Consumption and Warm Up Time while in the Power Save Mode or Sleep/Shutdown Mode, refer to page 90. ●The machine will not go into Sleep/Shutdown Mode when the Weekly Timer is selected. Indicator Flash: Power Save Mode Light: Sleep/Shutdown Mode Downloaded From ManualsPrinter.com Manuals
63 Making Copies Scanning is completed or Select Function Job Waiting List can be confirmed with Job Queue. (See page 40) ■ Interrupt Mode This mode can interrupt other copy jobs while making copies/printing. or Other Job set Other Job is completed Number of Copies (Max. 999) ∗Default M1/M2 size can be changed in the Function mode. (See page 74) Manual Skyshot Mode ●Set 07 Manual Skyshot Mode in Copier Settings first. (See page 67) Platen Upper- Left Corner Custom size∗ NOTE●If using ADF, place originals in the center position of ADF Tray. The ADF can feed only 14 - 28 lb plain paper. ●When using the manual skyshot mode, the M1 and M2 are turned On and other job requiring memory cannot be used. ●An incorrect position detection of the original may occur when a strong light shines onto the glass during skyshot mode. 3456 12345 123 Downloaded From ManualsPrinter.com Manuals
64 Function ■ Using Function Modes to Change the Initial Copy Modes General Settings General Settings for Key OperatorCopier Settings Copier Settings for Key OperatorPrinter Settings Printer Settings for Key OperatorFax/Email Settings Fax/Email Settings for Key OperatorScanner Settings Input Identification (Key Operator ID) CodeOptions General Settings:Changing the Initial Machine Modes ●Power On Default mode, Manually add toner, etc. (See page 66) For Key Operator: Paper size, Finisher bin/Staple mode, Department Counter, Network TCP/IP settings, etc. (See pages 70-73) ■ Procedure Select the desired Function Mode Select the desired Function NOTE●Please refer to the appropriate operating instructions manual for function settings on options. 123 When selecting the Key Operator Mode: 4 Identification Code (4-digit) Downloaded From ManualsPrinter.com Manuals
65 Function Copier Settings:Changing the Initial Copy Modes ●Default function of each copy mode (See page 67) For Key Operator: Paper size priority, Original mode, Contrast, Job Build and SADF mode, Original size of Manual Skyshot mode, etc. (See pages 73 and 74) Printer Settings:Changing the Initial Printer Modes ●Default function of each print mode (See page 69) For Key Operator: Job completion time, Page protection, Error page print, Spool function, PS configuration, Font list print, Mailbox data holding, etc. (See page 75) Scanner Settings: Changing the Initial Scanner Modes ●Original mode, Compression mode, Resolution, Job Build and SADF mode, Address book, etc. (See page 68) ●The Completion Notice will work for other modes (i.e. Copy, etc.) even if the Scanner Option not installed. Fax/Email Settings:Changing the Initial Fax/Email (i-FAX) Modes Refer to Operating Instructions (For Fax/Internet Fax function). Set the desired Function Parameter(s). 456 Set the desired Function 5 Set the desired Function Parameter(s). Downloaded From ManualsPrinter.com Manuals
66 Function ■ General Settings Screen No. 00 Power On Default Mode Selects mode. COPY ●COPY, PRINTER, SCANNER∗ , FAX∗ 01 Manual Add Toner Adds toner manually. Off ●Off, On 02 Sort Memory Status Indicates the sorting memory status. Off ●Off, On 03 Departmental Counter Indicates the department counter. Consult with an authorized service provider 04 Key Operator Mode Input the Key Operator ID Code. Modes FunctionInitial Setting 01/01 ∗When the optional Network Scaner Module/Fax Communication Board is installed. Downloaded From ManualsPrinter.com Manuals
67 Function ■ Copier Settings Screen No. 00 Margin Value Default Selects the margin shift value. 10 mm ●5 mm, 10 mm, 15 mm, 20 mm 01 Edge Value Default Selects the edge width. 5 mm ●5 mm, 10 mm, 15 mm, 20 mm 02 Book Value Default Selects the book void width. 20 mm ●15 mm, 20 mm, 25 mm, 30 mm 03 Margin Reduction Def. Selects the reduction ratio in margin mode. No ●No, Yes 04 2-Sided Mode Default Function sets the duplex priority mode. No ●No, 1 to 2, 2 to 2, B to 2 (B: Book) 05 Reduce N in 1 For Space Selects whether to disable edge deletion. No ●No, Yes 06 Digital Skyshot Mode Enables or disables the use of Skyshot mode. Freeshp ●No, Freeshp (Freeshape), Parallel 07 Manual Skyshot Mode Enables or disables the use of Manual Skyshot. Off ●Off / M1, On / M2, On / M1, M2, On 08 Auto Contrast Adjust Automatically adjusts the copy density for text Yes and photographic originals. ●No, Yes 09 N in 1 Default Mode Selects the N in 1 default mode. 2 in 1 ●2 in 1, 4 in 1, 6 in 1 11 Booklet Default Mag. Selects the booklet magnification. Reduce ●1, Reduce 12 Sort Mode Def. ADF Copy Selects the sort mode. Sort ●Non-Sort, Sort, Stplsort (Staple-Sort), Sftgroup (Shift-Group) 13 Sort Mode Def. FB Copy∗ Selects the sort mode. Non-Sort ●Non-Sort, Sort, Stplsort (Staple-Sort), Sftgroup (Shift-Group) 14 Staple Position Setting Selects the staple position. Portrait ●Landscap (Landscape), Portrait, Center 15 Stamping Default Mode Selects the stamping mode. Page ●Page, Date, Issue 16 Page Numbering Style Selects the page numbering style. -n- ●-n-, n/m 17 Hole Punch Default Enables the hole punch mode. Off ●Off, On 18 Img. Repeat Dotted Line Selects the dotted line. Print ●None, Print 19 Double Exposure Selects the double exposure. On ●Off, On 24 Key Operator Mode Input Key Operator ID code.Modes FunctionInitial Setting 01/05 02/05 03/05 04/05 ∗ FB: Platen 05/05 Downloaded From ManualsPrinter.com Manuals
68 Function ■ Scanner Settings Screen No. 00 Original Mode Default Sets the original setting. T/P ●Text, T/P (Text/Photo), Photo 01 Compression Mode Def. Sets the default compression mode setting. JBIG ●MH, MR, MMR, JBIG 02 Resolution Default Sets the default resolution setting. 600dpi ●150dpi, 300dpi, 600dpi 03 Job Bulid And SADF Mode Sets the SADF mode setting. No ●No, Yes 04 Bind Edge 2-Side Orig. Sets the bind position, 2-Sided original setting. Long ●Long, Short 05 Add New Address To add a new address.∗ 06 Edit Address Book To edit the address book.∗ 07 Delete Address To delete an address.∗ 08 Scanner Settings Print To print scanner settings print. Start ●Stop, Start 09 XMF File Type Sets the default XMF File Type. PDF ●TIFF, PDF Modes FunctionInitial Setting 01/02 02/02 ∗Address Book is not necessary to set in this function setting, your PC can be registered with Panasonic-DMS. (See page 84) Downloaded From ManualsPrinter.com Manuals
69 Function ■ Printer Settings Screen No. 00 Number Of Prints Sets the initial number of prints. 1 ●1 ~ 999 01 Paper Size Sets the paper size setting. LETTER ●A3, B4, A4, B5, A5, LEDGER, LEGAL, LETTER, INVOICE, 8 x 13, 8.5 x 13 02 Paper Tray Sets the Paper Tray setting. Auto ●Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4, LCT 03 Print Direction Sets the print direction setting. Portrait ●Portrait, Landscap (Landscape) 04 Auto Tray Selection Sets the auto tray setting. On ●Off, On 05 2-Sided Print Sets the 2-sided print setting. Off ●Off, On 06 Bind Edge Sets the bind position. Long ●Long, Short 07 Resolution Sets the resolution setting. 600 x 600 ●1200 x 600, 600 x 600, 300 x 300 08 Font (PCL) Sets the PCL font. 0 ●0 ~ 99 09 Symbol Table (PCL) Sets PCL symbol table. 11 ●0 ~ 35 10 Pitch (PCL) Sets the PCL pitch. 10.00 ●0.44 - 99.99 11 Point Size (PCL) Sets PCL point size. 012.00 ●4.00 - 999.75 12 Lines/Page (PCL) Sets PCL lines/page. 60 ●5 - 123 13 Return Character (PCL) Sets PCL return character. CR ●CR, CR + LF 14 Mutual A4/LTR Converts A4 to Letter automatically. Off ●Off, On 15 Mailbox Memory Status Indicates the mailbox memory status. 16 Print Data Sets print data. Stop ●Stop, Start 19 Key Operator Mode Input the Key Operator ID Code. Modes FunctionInitial Setting 01/04 02/04 03/04 04/04 NOTE●Functions No. 08 to 13 are available when the optional Printer Controller Module (DA-PC602) is installed. Downloaded From ManualsPrinter.com Manuals
70 Function For Key Operator ■ General Settings Screen No. 00 Paper Size Sets the paper size of each paper drawer.∗ Consult with an ●Ledger, Legal, Letter, Letter-R, Invoice, A3, authorized service B4, A4, A4-R, B5, B5-R, A5, 8 x 13, 8.5 x 13, dealer FLS2, AUTO∗∗ 01 Auto Reset Time Selects the Control Panel reset time. 1 min. ●None, 30 sec., 1 min., 2 min., 3 min., 4 min. 02 Power Save Mode Timer Sets the Energy Saver mode and time. 15 ●1-240 minutes 03 Sleep/Shutdown Timer Sets the Sleep/Shutdown timer. 90 minutes ●None, 1-240 minutes (DP-4520/6020) 15 minutes (DP-3520) 04 Language Default Selects the message language of the display. English 05 Special Paper Tray 1 Sets the paper drawer for special paper None (ex: coloured). ●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass 06 Special Paper Tray 2 Sets the paper drawer for special paper None (ex: coloured). ●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass 07 COPY Output Bin∗∗∗ Sets the output bin. Upper ●Upper, Bottom 08 PRINTER Output Bin∗∗∗ Sets the output bin. Bottom ●Upper, Bottom 09 FAX/EMAIL Output Bin∗∗∗ Sets the output bin. Bottom ●Upper, Bottom 10 Auto Paper Out Rotate Copier will automatically rotate image and Off print when selected paper tray is empty. ●Off, On 11 TCH Panel Beep Sound Beep sounds when touching the panel. Soft ●Off, Soft, Loud 12 Original Set Beep Sound Beep sounds when original is set on the Platen. No ●No, Yes 13 Orig. Set In ADF Sound Beep sounds when original is set into the ADF. Yes ●No, Yes 14 Dept. Counter Mode Monitors copy usage of each department. Consult with an (1) Print usage of each department authorized service (2) Print limit of each department dealer (3) ID code of each department Modes FunctionInitial Setting 01/10 02/10 03/10 NOTE●The Key Operator ID Code is required before any changes can be made to items on this page. ∗Only 3 Paper Sizes (Letter, A4, B5) will be available when selecting Tray 1. ∗∗“AUTO” Paper Size can be selected for Tray 2. ∗∗∗Functions No. 07 to 09 are available when optional Finisher DA-FS600/FS605 is installed. Downloaded From ManualsPrinter.com Manuals