Panasonic DP 3530 User Manual

11
Getting To Know
Your Machine
For Your Safety
■The maximum power consumption is 1.45 kW.
A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the machine is installed near a wall outlet and is easily accessible.
Caution Note: Unplug the power cord from the wall outlet before removing covers.
Supplies
■Store the Toner Cartridge and paper in cool areas with low...

12
Getting To Know Your Machine
Ventilation
■The machine should be installed in a well-ventilated area to minimize the ozone density in the air.
WARNING For USA
This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in
some components. Disposal of these materials may be regulated in your community due to
environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics
Industries Alliance:  .
Handling...

13
Getting To Know
Your Machine
■Key Operator Password
● The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require
the Key Operator Password.
For Key Operator :
When setting up this machine, please consult with the authorized service provider,
and decide on the Key Operator Password together, then record it and keep it in a
safe place for future reference.
■Dept. (Departmental) Code
When the Department Counter function is set up, the Dept. (Department) Code...

14
Getting To Know Your Machine
Operation Chart
If set in other
function mode
Face Up
Original Guides
Adjust to the original’s width
From
ADF
From
PlatenFace Down
●If the original is not positioned
properly, a portion of the original
may not be copied.
●For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
Tray
Max. 70 originals
● Adding Paper (550-Sheet Paper Tray 2-4)
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.Paper Weight: 16-24...

15
Getting To Know
Your Machine
Reduction/Enlargement only
(See page 36) Select desired settings
Number of Copies
(Max. 999)
Adjust the Manual Exposure
                     or
Select type of Original(s)
Mainly TextText and Photo
combinedMainly Photo
Copy Jobs
(See pages 34-41) (See pages 42-47) (See pages 48 and 49)
(See pages 50-55) (See pages 56-59) (See pages 60-63)
■ Problem Solving
Adding Paper
(See pages 14-17)
Replacing Toner Bottle
(See pages 16 and 17)
Replacing Toner Waste
Container
(Call your...

16
Getting To Know Your Machine
Hopper
2
1Toner Bottle
Toner Hopper
Face-Up
Paper Feed Tray
2
1
Max Level Indicator
Operation Chart
■ Problem Solving
● Adding Paper (3000-Sheet Large Capacity Paper Tray (LCT) (Option))
● Adding Paper (1550-Sheet Paper Tray 1)
Do not touch the tray while
it is moving.
12
12
Paper Weight: 16-24 lb
3
Paper Capacity: 1550 Sheets (20 lb)
● Replacing Toner Bottle/Replacing Toner Waste Container
12
6
After tray stops, place paper neatly on
the tray. Letter∗
 size only...

17
Getting To Know
Your Machine
2Empty Toner Bottle
1
New Toner Bottle
10 to 15 times
Cap
Overfill Indicator
Paper Capacity: 3000 Sheets (20 lb)
4
34
ATTENTION
●For optimum copy quality it is recommended that
only Panasonic Brand toner is used in the copier.
Store toner in a cool dark area with low humidity.
Do not unseal the toner bottle unless you are
ready to use it.
345
6
8
Shake the new Toner Bottle
well to loosen the contents.
Downloaded From ManualsPrinter.com Manuals 

18
Getting To Know Your Machine
Staple Cartridge
Staple Cover
Stapler Cover
2
1
Lock Lever
Stapler Unit
Stapler Cover
Operation Chart
■ Problem Solving (Common Operation)
● 2-Bin Finisher (DA-FS330)
● Replacing the Staple Cartridge (Common Operation) (When optional Finisher is installed.)
1
DA-FS3301
Replace the Staples Case
as following procedures.
For 1-Bin Saddle-Stitch
Finisher (DA-FS355A)
(See page 20)
● 2-Bin Finisher (DA-FS600)/2 Bin Saddle-Stitch Finisher (DA-FS605)
orAdd Staples...

19
Getting To Know
Your Machine
Staple CartridgeEmpty
New2
1
TapeNew
Empty21
Tape
Empty
2
1
New
Staple Cartridge
Number of Copies
(Max. 999)
34Check the
operation2
456
7
10
456
456
7
Close the
Staple Cover.
When the Staple is jammed
●The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
 Confirm Staple UnitFor DA-FS330: For DA-FS600/FS605:Jammed
Staple
2
1
3
Jammed
Staple21
3
Stitcher Unit
Until it
stops
Close the Lower Front Cover.
Downloaded From ManualsPrinter.com Manuals 

20
Getting To Know Your Machine
Stapler UnitStaple CartridgeTape
Stapler Unit
21Blue MarkFinisher Front Cover
Operation Chart
■ Problem Solving (Continued)
● 1-Bin Saddle-Stitch Finisher (DA-FS355A)
● Removing a Misfed Paper (Locations)
123
897
Misfed Location Indicator
●Indicates to open each cover, check
and remove any misfed paper.
DA-FS330 DA-FS355
DA-FS355ADA-FS600 DA-FS605
AB
C D
E
F
G H
IJ
Finisher
i-ADF Copier
ADU
Paper Feed Unit
LCT
H:Finisher (See page 26)
J:i-ADF (See page 24) A:System Console...