Panasonic DP 3530 User Manual

31
Before Starting
DP-6030
1089
1234567
Contents
COPY Key
● To use the unit as a photocopier.
ENERGY SAVER Key
● Saves power while the copier is not in use.
INTERRUPT Key
● Interrupts other copy or print jobs while making copies.
FUNCTION Key
● Use when changing the paper size, initial function values (default values) and key operator settings.
RESET Key
● Resets all features to the initial power-on state.
CLEAR Key
● Clears the copy count in the display.
STOP Key
● Stops the copy run.
STATUS LED (RED)
●...

32
Before Starting
To uch Panel Display
DP-6030
12345910
202221
12
15
16
18
19
26
25
24
23
27
13
14
118
67
17
NOTE●Use only gentle finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
●Touch Panel Display Brightness Adjustment:
To adjust the brightness of the Touch Panel display, press and while holding down the  C
(CLEAR) key, keep pressing the  ORIGINAL SIZE/LEDGER or the  COPY SIZE/LEDGER
keys until the desired...

33
Before Starting
Contents See Page
Warning Indications14 - 17
      : Add Toner        : Add Paper     : Call Service (Call your Service Provider)      : Waste Toner
Original Icon—
Original Size Indication—
Multi-Size Feeding / Job Build and SADF Mode Indication 46 and 47
Rotate Mode Indication—
Number of Copies / Original(s) —
Machine / User Error Code Indication (E1-01, U13, etc.) 21 and 86
Copy Icon—
Copy Size Indication—
Reserve a Job Button63
Finisher Functions Indication49
Machine Outline with...

34
Making Copies
Basic Menu
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
100%
If set in other
function mode or
If original size
is not detected
NOTE●During the copy operation and after making copies, the fan motor may start spinning. This is a
normal operation and is used to cool down the copier.
12
■ Positioning Original(s)
On the i-ADF On the Platen
■ Using the ADF
 Originals that cannot be used
●Post Cards,  Drawing Papers, Transparencies,
Labelling Papers, Heavyweight...

35
Making Copies
Adjust the Manual Exposure
  or  
Select type of Original(s)
Mainly Text
Text and Photo
combined
Mainly Photo
Number of Copies
(Max. 999)
NOTE●Memory Capacity:
If memory overflows during original scanning, the message  “Cannot Complete / Job
Exceeds Memory Capacity” will be displayed on the LCD. If this occurs, follow the instructions
on the LCD.
When additional memory is required, consult with an authorized service provider.
■ Copying on Heavy Paper (Post Cards, etc.) (35 lb max.)
Load...

36
Making Copies
Basic Menu
100
copies
50
copies50
copies
+
100 copies
2 1100
■ Copying with Preset Ratios (Reduction/Enlargement)
Letter
Ledger LetterLedger oror
If original size
is not detected
■ Proof Copying
or
Allows you to make one proof set, before
proceeding to copy a large multi-set with
various settings.
Proof copy
Multi copy
Select Copy Job settings
■ Tandem/Remote Copying
or
Requires installation of optional Hard Disk Drive (DA-
HD60), Network setup (See pages 71, 78 and 79)
and Parameter...

37
Making Copies
ORIGINALCOPY SIZE
SIZE Ledger Legal Letter-RInvoice-R
Ledger 100 77 65 50
Legal 121 100 79 61
Letter-R 129 100 100 65
Invoice-R200 155 129 100 The Correct ratio is automatically selected.
Reduction and enlargement ratios (%)
DP-6030
Number of Copies
(Max. 999)
DP-6030
Number of Copies
(Max. 999)
If the Proof copy is OK,
the remaining number
of sets will be printed.
If the Proof Copy is NG,
again, place the originals
back on the ADF (or
Platen) and try again. or
DP-6030
Number of Copies...

38
Making Copies
Basic Menu
■ Tandem/Remote Copy Settings (Registration 1)
Input the Key Operator ID Code if required.DP-6030
DP-6030
Input ID Code
(4-digit)
Enter the key name∗
(up to 15 characters).
∗By default, the key name will
be up to 15 characters of the
station’s name.
■ Tandem/Remote Copy Settings (Registration 2)
If installing the machine on a Network
with a different subnet mask, you must
first register it before being able to use
the Tandem/Remote Copying function.DP-6030
Scroll to
05/05
30IP...

39
Making Copies
Scroll to 08/10
To input upper case letter(s).
To input numbers and/or symbols.To move the cursor (_) to the left or right side.
To erase the character before the cursor. Machine name
(up to 15 characters)
Button Names on the QWERTY Keyboard
Input ID Code
(4-digit)Scroll to
05/05
Enter the machine and key
name, same as the Registration
procedures above.
Select the registered
machine name
Enter the new IP Address,
same as the Registration
procedures above.Enter the machine and key
name,...

40
Making Copies
Basic Menu
■ Job Queue
Refers to a list of jobs waiting to print, delete
or change of priority (only for print job).
Job
 1
Job
 2
Job
 3
Job 3
Job 1
Job 2
Deleted
Select the job(s)∗
you wish to delete
∗∗
∗You can select to delete multiple/all jobs.
∗∗Priority can be selected for print jobs only
when the optional HDD is installed. Select the job(s)
■ Completion Notice
A Job Completion Notice via a pop up screen on the
Desktop of your PC when the Copy Job is
completed.
Before using the...