Panasonic Dmw Sdp1 Operating Instructions

							
Connecting to other equipment
1LSQT1098
Connecting to a PC
By connecting the unit to a computer, you can upload your pictures.To connect
A :  
Check the facing of the connector and push straight in.
B : USB connection cable (not supplied)
Turn on the unit and the PC.
Connect the unit to a PC via the USB 
connection cable B (not supplied).
Connect the USB cable to the corresponding terminals whose shape matches the USB cable.Insert or pull out the USB cable straight. (Do not force to insert the connector in 
backwards or sideways. This may cause deformation of the terminal and malfunction of the unit and the equipment other than Panasonic connected to this unit.)“PLEASE TURN OFF THE PRINTER OR PC FOR PHOTO PLAYBACK ON TV” appears on the TV.The operation indicator blinks during transmission. Do not disconnect the USB cable while this indicator is blinking. 
•
Ù
1�
2�
•
•
•
•
[Windows]The [Removable Disk] appears on the [My Computer] folder.Some cards may appear as something other than “Removable drive.”If it is the first time you are connecting the unit to a PC, the required driver is installed automatically so that the unit can be recognized by the Windows Plug and Play, then [Removable Disk] appears on the [My Computer] folder.This unit is Windows ME/2000/XP compatible.To upload pictures
1 Double click on the “Removable drive” in 
[My Computer].
2  
Double click on the “DCIM” folder.
3  
Select the pictures you want to upload, 
copy and paste them to a folder on your 
computer.
To safely disconnect the USB cable
1 Double click on the  icon in the notification area of the task bar at the 
bottom right of the computer screen.
The “Safely remove hardware” dialog 
appears.
2  
Select “USB Mass Storage Device” and 
click “Stop”.
3  
Make sure “USB Mass Storage Device” 
is selected and click “OK.
4  
Click “Close”.
You can now safely disconnect the 
USB cable.
5  
Disconnect the USB cable.
•
•
•
•
•
AUDIO OUTDC IN 4.8VUSBANALOG COMPONENT
B
A 
						

							
Connecting to other equipment
LSQT1098

[Macintosh]The drive is displayed on the screen.The drive is not displayed when you connect the unit with no card inserted.The drive is displayed as [NO NAME] or [Untitled] when you connect the unit with a card inserted.This unit is Mac OS 9 compatible. To upload ipictures from an SDHC memory card when using Mac OS X version 10.2 or later, set the card’s write-protect switch to [LOCK]. (P12)To upload pictures
1 Double click on the folder called “NO 
NAME” on the destop.
2 
Double click on the “DCIM” folder.
3  
Select the pictures you want to upload, 
copy and paste them to a folder on your 
computer.
To safely disconnect the USB cable
1  
Put the folder named [NO NAME] into 
the trash can.
2  
Disconnect the USB cable.
n If “Removable drive” or“NO NAME” doesn’t appearTurn off the computer and this unit, disconnect the USB cable, then reconnect and try again. If your computer has more than one USB terminal, try connecting to another one.Connection may not be possible if you use a USB hub or USB extension cable. 
•
•
•
•
•
•
n Folder CompositionFolders appear as follows. (Actual folder names depend on the camera they were created with. The following is an example when created with a Panasonic LUMIX.)
1  
Folder number2  
File number3  
JPG : Pictures MOV : Motion pictures RAW : RAW format files
The contents of each folder are:
DCIM100_PANA to 999_PANA
100_PANA to 999_PANAPictures/Motion pictures/Pictures in RAW files
MISCFile with DPOF setting
PRIVATE1Flip animation files
When connecting the unit to a Windows 2000 OS PC with the USB connection cable, do not replace the card while the camera and the PC are connected. The information on the card may be damaged. Disconnect the USB connection cable before replacing the card.Pictures edited or rotated with a PC may be displayed in black in playback mode (P13), multi playback (P14) and calendar playback (P15).
Refer to the operating instructions of the PC, too.
•
•
•
D C IM
M I S C
PRIVATE1
100_PANA
101_PANA
999_PANA
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
2 3
Card 
						

							
Connecting to other equipment
LSQT1098

Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (not supplied), you can select the pictures to be printed or start printing on the TV screen.
Before turning on the printer, 
select [PRINT] in the Playback 
menu and press q.
“PLEASE CONNECT TO THE PRINTER AND TURN ON THE PRINTER” appears.To cancel, press [A].
Connect the unit to the printer 
with a USB cable (not included).
Connect the USB connection cable so it matches the shape of the USB terminal.Insert or pull out the USB cable straight. (Do not try to insert the connector in backwards or sideways. This may damage the terminal and the unit and other equipment connected to this unit.)
Turn the printer on.
1�
•
•
2�
•
•
3�
n To connect
A : Check the facing of the connector and push straight in.
B : USB connection cable (not supplied)Make the necessary settings on your printer. (Read your printer’s operating instructions.)If you connect the printer and turn it on before selecting [PRINT] in the Playback menu, “PLEASE TURN OFF THE PRINTER OR PC FOR PHOTO PLAYBACK ON TV” appears.If this happens, turn the printer off, reselect [PRINT] in the Playback menu, then turn the printer back on.
•
•
A
AUDIO OUTDC IN 4.8VUSBANALOG COMPONENT
B
A
1/2
MENU
PLAY
SELECTEXIT
SLIDE SHOW
FAVORITEROTATE DISP.ROTATE
PRINTONON 
						

							
Connecting to other equipment
LSQT1098

n Printing the selected picture (making a single print)
Press w/q to select the picture 
and then press [MENU/SET].
A message displays for about 2 seconds.
To cancel, press [A].
Press e/r to select [PRINT 
START] and then press [MENU/
SET]. 
Press [MENU/SET] to cancel printing.
When you are finished printing, 
press [A] then turn the printer 
off.  
1�
••
2�
•
3�
n  Selecting multiple pictures for printing
Press e.
Press [A] to return to the original screen.
Press e/r to select an item and 
then press [MENU/SET].
ItemSetting contents
MULTI SELECTMultiple pictures are selected at once for printing.[Operation]On the plural pictures screen, press w/q to select pictures. 
When you press r, [] is displayed with the picture you selected for printing. (When you press r once more, the print setting is canceled.)Press [MENU/SET] when you finish selection.
SELECT ALLAll pictures in the card are printed.
DPOFPictures in the [DPOF PRINT] setting (P25) are printed.
FAVORITEPictures set as favorites (P22) are printed.This item appears only when favorite setting (P22) is [ON].You can not select any picture when [FAVORITE] is set to [ON], but no picture is marked with [].
•
•
1�
2�
MENU
1/19 100-0001 PictBridge 
PLEASE SELECT THE PICTURE TO PRINT 
SELECT MULTI PRINT PRINT CANCEL 
MENU
SINGLE SELECT
PRINT WITH DATENUM. OF PRINTSPAPER SIZEPAGE LAYOUTSELECTSET
1
PRINT START
MENU
SETCANCEL
MENU
PictBridge
SELECT
MULTI SELECTSELECT ALLDPOFFAVORITE
SETMENU
SETCANCEL 
						

							
Connecting to other equipment
LSQT1098

Press e/r to select [PRINT 
START] and then press [MENU/
SET].
In DPOF setting, [PRINT WITH DATE] and [NUM. OF PRINTS] are not displayed.When you select [DPOF PICTURE], [DPOF SET] is selectable. When you select [DPOF SET], refer to P25 and make DPOF setting.Press [MENU/SET] when you wish to cancel printing halfway.When you select [MULTI SELECT], [SELECT ALL] or [FAVORITE], the print confirmation screen appears. Select [YES] and perform printing.When the number of prints exceeds 1,000, [PRINTING --- PICTURES. DO YOU WANT TO PROCEED?] appears on the print confirmation screen.
When you are finished printing, 
press [A] then turn the printer 
off. 
n Setting date printing, the number of prints, the paper size and the page layoutSelect an item to set on the screen for step 2 in “Printing the selected picture (making a single print)” (P34) or on the screen for step 3 in “Selecting multiple pictures for printing” (P34).
3�
•
•
•
•
•
4�
The items which are not supported by the printer are displayed in gray and cannot be selected.When you want to print pictures in a paper size or a layout which is not supported by this unit, set [PAPER SIZE] and [PAGE LAYOUT] to [F] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.)
[PRINT WITH DATE]
FSettings on the printer are prioritized.
OFFDate is not printed.
ONDate is printed.
If the printer does not support date printing, the date cannot be printed on the picture.
[NUM. OF PRINTS]Set the number of prints.You can set up to 999 prints.
[PAPER SIZE](Possible paper sizes on the camera)The items are listed on 1/2 and 2/2.Press r to select the desired item.
1/2
FSettings on the printer are prioritized.
L/3.5˝×5˝89 mm×127 mm
2L/5˝×7˝127 mm×178 mm
POSTCARD100 mm×148 mm
A4210 mm×297 mm
•
•
•
•
•
•
•
MENU
MULTI SELECT
PRINT WITH DATENUM. OF PRINTSPAPER SIZEPAGE LAYOUTSELECTSET
1
PRINT START
CANCEL
MENU
SET
MENU
SINGLE SELECT
PRINT WITH DATENUM. OF PRINTSPAPER SIZEPAGE LAYOUTCANCELSET
1
PRINT START
SELECT 
						

							
Connecting to other equipment
LSQT1098
2/2*
CARD SIZE54 mm×85.6 mm
10×15cm100 mm×150 mm
4˝×6˝101.6 mm×152.4 mm
8˝×10˝203.2 mm×254 mm
LETTER216 mm×279.4 mm
*These items cannot be displayed when the printer does not support the paper sizes.
[PAGE LAYOUT](Possible layouts on the camera)
FSettings on the printer are prioritized
G1 page with no frame print
H1 page with frame print.
I2 pages print
J4 pages print
An item cannot be selected if the printer does not support the page layout.
n Layout printingWhen printing a picture several times on 1 sheet of paperFor example, if you want to print a picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [J] and then set the number of prints to 4 for the picture on [NUM. OF PRINTS].When printing different pictures on 1 sheet of paperFor example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE LAYOUT] to 4-picture printing [J] and then set [NUM. OF PRINTS] for the pictures to 1 in [MULTI SELECT] (P34).
•
•
•
•
Do not disconnect the USB connection cable when the cable disconnection warning icon [K] is indicated. (Depending on the printer, the icon may not be displayed.)The unit is receiving an error message from the printer when the [*] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.If the total number of ordered prints or the number of pictures set for print is large, printing is performed at intervals. In such cases, the number of remaining prints shown on the display will differ from the number of prints you set. The discrepancy, however, does not indicate an error.Date print, paper size and page layout settings on the printer may have priority over the same settings on the unit. Check these settings on the printer as well.If printing did not work, try turning off the printer and start the procedure again 
from the beginning. (P33)
•
•
•
•
• 
						

							
Others
LSQT1098
[THIS MEMORY CARD IS PROTECTED]Cancel the card lock. (P12)
[NO VALID PICTURE TO PLAY]Play back after recording or after inserting a card with a recorded picture.
[THIS PICTURE IS PROTECTED]After canceling the protect setting (P27), you can delete or overwrite the picture.
[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]The pictures not based on the DCF standard cannot be deleted.
[NO ADDITIONAL DELETE SELECTIONS CAN BE MADE]You have exceeded the number of pictures that can be set at once with multi-delete setting.You have placed more than 999 pictures in your favorites list.
[CANNOT BE SET ON THIS PICTURE]/[CANNOT BE SET ON SOME PICTURES]If the pictures are not based on the DCF standard, the DPOF print cannot be set.
[MEMORY CARD ERROR PLEASE CHECK THE CARD]Failed access to the card. Insert the card again.
[READ ERROR PLEASE CHECK THE CARD]Data reading error.Insert the card again. Make sure the card is inserted properly and then play back again.
[PLEASE TURN OFF THE PRINTER]Printing has finished or was canceled. Turn the printer off. (P34, 35)
[PLEASE CONNECT TO THE PRINTER AND TURN ON THE PRINTER]The unit is in the print mode. Connect the printer and turn it on. (P33)
[PLEASE TURN OFF THE PRINTER OR PC FOR PHOTO PLAYBACK ON TV]If you want to print, first turn off the printer, then start the procedure again from the beginning. (P33)The unit is connected to a PC. (P31)For playback on a television, turn off your printer or PC to deactivate the USB connection.
•
••
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.The major messages are described below as examples. 
						

							
Others
LSQT1098

Others

If you put the menu back to the settings at the time of purchase, the conditions may be improved. 
n Playback
ConditionsCauses
Pictures rotate unexpectedly.This unit has Image Rotating Display function utilizing information recorded in the Exif file.Set [ROTATE DISP.] (P23) to [OFF] so that the unit does not rotate these kinds of pictures for you.You can use [ROTATE] (P23) to rotate the pictures when necessary.
•
•
The picture is not played back.Is there a picture on the card?
Folder or file name appears as [–] and the display goes black.
The picture may have been changed on a computer or taken on a different manufacturer’s camera. You will need to reformat the card to delete this type of picture. (P28) (Remember that all data will be irretrievably erased when you format the card, so save your data and check the card before proceeding.)Pictures edited or rotated with a PC may be displayed 
in black in playback mode, multi playback and calendar playback. 
•
•
The picture is displayed with a date different from the actual recording date in calendar playback.
Was the picture edited with a PC or recorded with a digital camera from another manufacturer? This kind of picture may be displayed with a date different from the actual recording date in calendar playback. (P15)
Is the clock in the camera used to take a picture set properly?  For example, if the clock setting on the camera used to take a picture is different from the date and time set on the PC and you acquire pictures recorded with the camera to the PC and then write them back to the card, the pictures may be displayed with dates different from the actual recording dates in calendar playback etc.
Picture quality of images in multi screen view is poor.
The images in multi screen views are thumbnails, not the original images. This means the image resolution is lower. Thumbnail data is created automatically at the time of shooting and is attached to the JPEG data for the specific purpose of display in these multi view selection screens.  
Troubleshooting 
						

							
Others
Others
LSQT1098

n Connecting to a TV, computer or printer
ConditionsCauses
The picture does not appear on the television. Is the unit connected to the TV correctly?Check it.
Set the TV to video input mode to suit the connection you have made.
Cannot upload pictures to your computer.Check the connections.
Check that the computer has correctly recognized the unit.(P31)
The pictures cannot be printed with printers.Does the printer support PictBridge? You cannot print pictures with printers which do not support PictBridge. (P33)
Select [PRINT] on the Playback menu. (P33)
The sides of printed images are cut off.If your printer has trimming and border settings, change the settings so that there is no trimming and no border. (Read your printer’s operating instructions.)Some photograhpy shops can handle pictures shot in the [j] aspect ratio. Enquire before sending them for printing.
•
•
The picture size does not fit the TV screen.Check the [TV ASPECT] setting on this unit. (P30)
n  Others
ConditionsCauses
Unreadable language was selected by mistake.Press [MENU/SET], select the [SETUP] menu icon [] and then select the [{] icon to set the desired language. (P30)
The remote control cannot be used.When the Remote control does not work even when used close to the unit, the battery has run out. Replace the old battery with a new one. (P9) 
						

							
Others
0LSQT1098

Others

Make sure to use the supplied cords and cables. Do not extend the cords and the cables.Do not spray insecticides or volatile chemicals onto the unit.If the unit is sprayed with such chemicals, the unit body may be damaged and the surface finish may peel off.Do not keep rubber or plastic products in contact with the unit for a long period of time.
Do not use benzine, thinner or alcohol for cleaning the camera.Before cleaning the unit, disconnect the AC adaptor from the electrical outlet.The unit body may be deformed and the surface finish may peel off.Wipe the dust or fingerprints with a soft, dry cloth. To remove stubborn stains, soak a dry cloth in water and then use it to wipe the dirt. Then wipe again with a dry cloth.Do not use a kitchen detergent or a chemically treated cloth.In case rain or other sources of water splash onto the unit, wet a soft cloth with tap water, wring it well, and use it to wipe the unit body carefully. Then wipe it again with a dry cloth.
n Card
Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated.Do not bend or drop the card.The card may be damaged or the 
recorded content may be damaged or erased.
•
•
•
•
•
•
•
•
Store the card in the card case or the storage bag after use and when you store or carry the card.Do not allow dirt, dust or water to enter the terminals on the back of the card and do not touch the terminals with your fingers.
•
Cautions for Use