Panasonic Dmw Sdp1 Operating Instructions

							
Preparation
Preparation
11LSQT1098

Check that the unit is turned off.Prepare your SD Memory Card (optional), SDHC Memory Card (optional) or MultiMediaCard (optional) containing shooting data.
Open the card cover.
Insert:
Insert the card until it clicks and locks.
Remove:
Push the card until it clicks, then pull the card out upright.
Check the direction of the card.Do not touch the connection terminals on the back side of the card.The card may be damaged if it is not fully inserted.
••
1�
2�
••
•
Inserting/Removing the Card (Optional)
Close the card cover.
If the card cover cannot be completely closed, remove the card, check its direction and insert it again.
The card and the data may be damaged if it is inserted or removed while the unit is on.We recommend using Panasonic’s SD Memory Card/SDHC Memory Card.
3�
•
•
• 
						

							
Preparation
1LSQT1098
About the Card
n About SD Memory Card (optional), SDHC Memory Card (optional) and MultiMediaCard (optional)
The SD Memory Card, the SDHC Memory Card and the MultiMediaCard are small, lightweight, removable external memory cards.The SDHC Memory Card is a memory card standard decided by the SD Association in 2006 for high-capacity memory cards more than 2 GB.The reading/writing speed of the SD Memory Card and the SDHC Memory Card is fast. The SD Memory Card and the SDHC Memory Card are equipped with a Write-Protect switch A that can inhibit writing and formatting. (When the switch is slid to the [LOCK] side, it is not possible to write or delete data on the card and format it. When the switch is unlocked, these functions become available.)
n  About cards that can be used in this unit
Y o u   c a n   u s e   a n   S D   M e m o r y   C a r d ,   a n S D H C   M e m o r y   C a r d   a n d   a   M u l t i m e d i a card.When the term card is used in these operating instructions this refers to the following types of Memory Cards.- SD Memory Card (8 MB to 2 GB)- SDHC Memory Card (4 GB)- MultiMediaCardMore  specific  information  about  memory cards that can be used with this unit.You can only use an SDHC Memory Card if using cards with a 4 GB or more capacity.A 4 GB Memory Card without an SDHC 
logo is not based on the SD Standard and will not work in this product. 
•
•
•
•
•
•
SD Memory Card
Please confirm the latest information on the following website.http://panasonic.co.jp/pavc/global/cs (This site is in English only.)This unit supports SD Memory Cards formatted in the FAT12 and FAT16 systems that comply with SD Memory Card Specifications. It also supports SDHC Memory Cards formatted in the FAT 32 system.This unit (SDHC compliant equipment) supports both SD Memory Cards and SDHC Memory Cards. You can use SDHC Memory Cards on equipment that supports them. You cannot use SDHC Memory Cards on equipment 
that supports SD Memory Cards only. (When you use SDHC Memory Cards on other equipment, make sure to read the equipment’s operating instructions.)
n  About handling a card
Save important data in such places as your PC (P31) as well. Electromagnetic waves, static electricity, unit malfunctions, card damages and other factors may destry or erase data. 
The reading speed of a MultiMediaCard is slower than an SD Memory Card. When a MultiMediaCard is used, the performance of certain features may be slightly slower than advertised.Keep the Memory Card out of reach of children to prevent swallowing.
•
•
•
•
A
2GB 
						

							
Playback/Menu
1LSQT1098
Insert the card (P11), press the 
Power button and turn the unit [ON].
The image data is displayed on the TV screen.
Press w/q to select the picture.
w : Play back the previous picture.
q : Play back the next picture.The picture following the last one is the first picture.Press and hold w/q and the pictures change successively. The date of shooting shown is according to the date recorded with the image, so it may not be the actual date of shooting.When [ROTATE DISP.] (P23) is set to [ON], pictures recorded by holding the camera vertically are played back vertically.
This unit is based on the DCF standards (Design rule for Camera File system) which was established by the Japan Electronics and Information Technology Industries Association (JEITA).
The file format that can be played back with this unit is JPEG (maximum resolution: 4224 x 3168 pixels; maximum file size: 9 MB; minimum resolution: 160 x 120 pixels). (There are also pictures that on some occasions cannot be played back in JPEG format.)Depending on the recording condition of the picture, quality may deteriorate when you play it back. (The pictures are displayed as [THUMBNAIL IS DISPLAYED] on the screen.)When changing the folder name or file name on a PC, the pictures will not be played back.
1�
••
•
•
•
•
•
•
When playing back a file out of standard, the folder/file number is indicated by [−] and the screen may turn black.An interference fringe may appear on the screen depending on the subject. This is called moire. This is not a malfunction.
n To delete characters or icons shown on the screenPress [DISPLAY]. The screen changes as follows each time you press the button. Actual displays depend on the recording condition of the images. 
*1  If you took the picture with [TRAVEL DATE] set, the day of the vacation you took the picture is displayed.*2 The baby’s age is displayed if you set the baby’s birthday in [BABY1]/[BABY2] scene mode and selected [WITH AGE].
*3  A histogram is a graph that displays brightness 
along the horizontal axis and the number of pixels at each brightness level on the vertical axis. The values shown on the histogram are approximate.
•
•
100-0001
10:00  DEC. 1. 2006
Playing Back Pictures
10000011/3
10000011/3
200ISOAUTOF2.8 1/100P
Þ
1ST DAY1 month 10daysDEC.  1.2006  10:00
DEC.  1.2006  10:00
Date of shooting
Display with recording information and histogram
Display
No display 
						

							
Playback/Menu
1LSQT1098

Press [] side of the Zoom 
button on the Remote control to 
display Multiple Screens. 
:  1 screen → 25 screens → Calendar screen display. (P15)You can also press [MULTI] on the Remote control to show the 25 screens.Press [3] side of the Zoom button on the Remote control to display Multiple Screens.When you select multi playback, the scroll bar A appears so you can check the position of the selected picture in the total pictures.
Press e/r/w/q to select a picture.
B:Number of the selected picture and the total number of recorded pictures
The recording date and number of the selected picture and the total number of recorded pictures are displayed.
1�
•
•
•
•
2�
•
Depending on the recorded picture and the setting, the following icons will appear.− [](Favorites)
− [](Motion picture)− [K]([BABY1]/[BABY2] in scene mode, age in months, age in years etc.)
− [](Travel date)− [M](Flip animation)
n  To return to the normal playbackPress [3] side of the Zoom button or press [MENU/SET] or [SINGLE]. The picture framed in an orange box appears.
n  To delete a picture during a multi playback1  
Press e/r/w/q to select a picture and then press [A].
2  
Press e to select [YES].
3  
Press [MENU/SET].
Even if the indications on the screen are turned off in normal playback mode (P13), the recording information etc. appears on the screen in multi playback. If you return to the previous screen, the indications on the screen are displayed as in normal playback mode.Pictures will not be displayed in the rotated direction even if [ROTATE DISP.] is set to [ON] (P23).
•
•
•
•
Displaying Multiple Screens (Multi Playback)
MENU
1/34
CANCEL
DEC. 1.2006
CAL 1
MENU
5/34
CANCEL
DEC. 1. 2006
CAL 1 
						

							
Playback/Menu
1LSQT1098

Displaying pictures by recording date (Calendar playback)
You can display pictures by recording date using the calendar playback function.
Press [CALENDAR] button on 
the Remote control to display 
calendar screens.
When pressing [] side of the Zoom button on the Remote control, you can also display calender screens.1 screen → 25 screens → Calendar screen displayThe recording date of the picture selected in the playback screen becomes the date selected when the calendar screen is first displayed.If there are multiple pictures with the same recording date, the first picture recorded on that day is displayed.The calendar is displayed monthly.
Press e/r/w/q to select the date 
to be played back.
w/q: Select the date
e/r: Select the monthIf there were no pictures recorded during a month, the month is not displayed.
Press [MENU/SET] to display the 
pictures that were recorded on 
the selected date.
1�
•
•
•
•
2�
•
3�
The pictures that were recorded on the selected date are displayed.To return to the calendar screens, press 
[] side of the Zoom button.
Press e/r/w/q to select a picture 
and then press [MENU/SET].
The selected picture is displayed on the 1 screen playback screen.
n To return to the 1 screen playback screen.When pressing [3] side of the Zoom button, 25 screens and 1 screen are displayed. (P14)When pressing [SINGLE] on the Remote control, you can jump to the 1 screen.
The pictures are displayed without being rotated even if you set [ROTATE DISP.] to [ON]. (P23)You can display the calendar between January 2000 and December 2099.If the recording date of the picture selected in 25 screens multi playback is not between January 2000 and December 2099, the unit automatically displays it in the oldest calendar date.Pictures edited on a PC or processed on the equipment other than Panasonic may be displayed with dates different from the actual recording dates.
•
•
4�
•
•
•
•
•
•
•
200612
SUN
310172431
TUE
5121926
THU
7142128
SAT
92
162330
FRI
8152229
WED
132027
MON
4
1825
11
16
MENUDAYMONTHSET
MENU
1/34
CANCEL
MENU
SET
DEC. 1. 2006
CAL 
						

							
Playback/Menu
1LSQT1098

Using the Playback Zoom
Press [3] side of the Zoom 
button on the Remote control to 
magnify the image.
3: 1×→2×→4×→8×→16×
When pressing [] side of the Zoom button after enlarging the picture, the magnification becomes lower. When pressing [3] side of the Zoom button, the magnification becomes higher.When you change the magnification, the zoom position indication A appears for about 1 second to check the position of the section enlarged.
Press e/r/w/q to move the 
position.
When you move the position to be displayed, the zoom position indication is displayed for about 1 second.
1�
�•
•
2�
•
n To stop using the playback zoomPress [] side of the Zoom button or press [MENU/SET]. 
n  To delete a picture during the playback zoom1  
Press [A].
2  
Press e to select [YES].
3  
Press [MENU/SET].
Even if the indication are turned off in normal playback mode (P13), the magnification and enabled operations appear when the playback zoom is activated.  You can switch the display on or off by pressing the [DISPLAY] button on the Remote control. When you set the magnification to 1×, the indication are displayed as in normal playback mode.The more the picture is enlarged, the more its quality deteriorates.The playback zoom may not operate if pictures have been recorded with the equipment other than Panasonic.
•
•
•
•
2X
DELETECANCEL
A
2X
CANCELDELETE 
						

							
Playback/Menu
1LSQT1098

To enjoy sound, connecting the 
Sound cable is necessary.
n Motion picturesPress w/q to select a picture with a 
motion picture icon [30fps       VGA]/[10fps       VGA]/ 
[30fps     QVGA]/[10fps     QVGA]/[15fps16:9H]/[30fps16:9L]/[10fps16:9L] and then press r to play back.
The motion picture recording time A is displayed on the screen. After playback starts, the motion picture recording time disappears and the elapsed playback time is displayed on the bottom right of the screen. For example, 1 hour 20 minutes and 30 seconds is displayed as [1h20m30s].The cursor displayed during playback corresponds to e / r / w/q.Motion picture playback stops and the normal playback is restored by pressing r.
Fast forwarding/Fast rewindingDuring motion picture playback, keep pressing w / q. 
q: Fast forward 
w: Fast rewind
When releasing the button, it turns to normal motion picture playback.
To pausePress e during motion picture playback.Press e again to cancel pause.
•
•
•
•
•
•
n  Pictures with audioPress w/q to select a picture with the audio icon [A] and then press r to play back.
This unit can play the following QuickTime Motion JPEG format files shot on a Panasonic LUMIX camera.4:3 motion pictures30fps       VGA:VGA (640x480)/30 fps10fps       VGA:VGA (640x480)/10 fps 30fps     QVGA:QVGA (320x240)/30 fps10fps     QVGA:QVGA (320x240)/10 fps16:9 motion pictures15fps16:9H:16:9H (1280x720)/15 fps30fps16:9L:16:9L (848x480)/30 fps10fps16:9L:16:9L (848x480)/10 fpsSome QuickTime Motion JPEG files recorded by a PC or the equipment other than Panasonic may not be played back with this unit.When playing back motion pictures that have been recorded with the equipment other than Panasonic, the quality of pictures may be deteriorated or it may not be possible to play them back.When using a high capacity card, it is possible that fast rewinding may be slower than usual.You cannot use the following functions with motion pictures and pictures with audio.- Playback zoom (While playing back or pausing motion pictures and while 
playing audio)- [ROTATE DISP.]/[ROTATE] (Motion Pictures only)
•
•
•
•
•
Playing Back Pictures with Audio/Motion pictures
100-00011/1925S
30fps     16:9
A
PLAY MOTION PICTURE
10:00  DEC. 1. 2006
100-00011/19
PLAY AUDIO
10:00 DEC. 1.2006
Audio icon 
						

							
Playback/Menu
1LSQT1098

Deleting Pictures
n To delete a single picture
Select the picture with w/q.
w: Play back the previous picture.
q: Play back the next picture.
Press [A] on the remote control.
Press e to select [YES] and then 
press [MENU/SET].
While deleting the picture, [A] appears on the screen.
1�
2�
3�
•
n  To delete [MULTI DELETE]/[ALL DELETE]
Press [A] on the remote control 
twice.
Press e/r to select [MULTI 
DELETE] or [ALL DELETE] and 
then press [MENU/SET].
If you select [MULTI DELETE], perform steps 3 onwards.If you select [ALL DELETE], perform steps 5 onwards.When [FAVORITE] (P22) is set to [ON], [ALL DELETE EXCEPT ] appears. If you select [ALL DELETE EXCEPT ], perform steps 5 onwards. (However, if none of the pictures have [] displayed, you cannot 
select [ALL DELETE EXCEPT ] even if [FAVORITE] is set to [ON].)
1�
2�
•
•
•
100-00011/19
10:00  DEC. 1. 2006
MENU
 
SELECTCANCELSET
MULTI DELETEALL DELETE
MULTI/ALL DELETE
MENU
SET
MENUSELECTSETMULTI/ALL
NOYES
DELETE SINGLE
MENU
SET 
						

							
Playback/Menu
1LSQT1098

Press w/q to select the picture 
and then press r to set.
(Only when selecting [MULTI DELETE])
Repeat the above procedure.The selected pictures appear with [A]. When r is pressed again, the setting is canceled.The icon [c] blinks red if the selected picture cannot be deleted. Cancel the protect setting. (P27)
Press [A] on the remote control.
Press e to select [YES] and then 
press [MENU/SET] to set.
(Screen when selecting [MULTI DELETE])
[DELETE ALL PICTURES IN THE MEMORY CARD ?] is displayed when using [ALL DELETE], and [DELETE ALL EXCEPT ?] is displayed when using [ALL DELETE EXCEPT ].If you press [MENU/SET] while deleting pictures using [ALL DELETE] or [ALL DELETE EXCEPT ], the deleting will stop halfway.
3�
••
•
4�
5�
•
•
Once deleted, pictures cannot be recovered. Please double-check before deleting pictures.Do not turn off the camera while deleting.It is possible to delete up to 50 pictures at one time using [MULTI DELETE].The more pictures there are to delete, the more time it takes.In the following cases, pictures are not deleted even if [ALL DELETE] or [ALL DELETE EXCEPT ] is selected.- When the Write-protect switch of the SD Memory Card or SDHC Memory Card is set to the [LOCK] side (P12)- When files do not conform to the DCF (P13)- When pictures are protected [c] (P27)
•
••
•
•MENU
MULTI DELETE
SELECTMARK/UNMARKEXITDELETE
1234
5678
9101112
1 234
5678
9101112
MENU
MULTI DELETE
SELECTSET
DELETE THE PICTURESYOU MARKED?
NOYESMENU
SET 
						

							
Playback/Menu
0LSQT1098

Using the [PLAY] menu
You can use various functions to rotate pictures, set protection for them etc.Refer to P21 to 28 for each menu item.
Press [MENU/SET].
Press e/r to select the menu 
item.
Press r at A to switch to the next menu screen.
Press q.
After selecting a menu item in step 3, refer to the description of the menu item in the operating instructions and then set it.
•
1�
2�
•
3�
•
n About the menu screen itemsThere are 2 menu screens (1/2 and 2/2).You can switch menu screens from any menu item by rotating the zoom button.
••
1/2
OFFON
SELECT
A
SLIDE SHOWPRINT
PLAY
ROTATEROTATE DISP.FAVORITE
MENUEXIT
2/2
MENU
PLAY
SELECTSET
PROTECTFORMAT
DPOF PRINTSINGLEMULTICANCEL
OFF
1/2
MENU
PLAYSLIDE SHOWFAVORITEROTATE DISP.ROTATE
PRINT
SELECTEXIT
2/2
MENU
PLAY
SELECT
DPOF PRINTPROTECTFORMAT
EXIT