Panasonic Dmw Sdp1 Operating Instructions

							
Playback/Menu
1LSQT1098

Press [MENUSET] to display the [PLAY] mode menu and select the item to set. (P20)You can skip unwanted pictures if [FAVORITE] (P22) has been set.
Press e/r to select [ALL] or [] 
and then press [MENU/SET].
ALLFor playing back all pictures
For showing pictures in your favorites list (P22)
The screen shown in step 1 appears when [FAVORITE] is set to [ON].  When [FAVORITE] is set to [OFF], 
perform step 2 onwards.You can also display the [PLAY] menu when pressing [SLIDE SHOW] button on the Remote control.  When [FAVORITE] is set to [ON], select [ALL] or [FAVORITE], and then perform step 2 onwords.If none of the pictures have [] displayed, you cannot select [] even if [FAVORITE] is set to [ON].
Press e to select [START] and 
then press [MENU/SET].
(Screen when [ALL] is selected)
1�
•
•
•
2�
The cursor displayed during a slide show 
A or while a slide show is paused B or during [MANUAL] slide show C is the same as e/r/w/q.Press e to pause the slide show. Press e again to cancel pause.Press w/q while paused to display the previous or next picture.
By pressing the r, the Slide 
Show stops.
n About playback duration, effect and audio settings
Select [DURATION], [EFFECT] or [AUDIO] for setting on the screen displayed in step 2.
DURATIONSelect intervals of 1, 2, 3, 5 seconds or MANUAL.
EFFECTYou can select slide show effects.OFF: No effect is set
:  Pictures slide sideways and switch
:   
The picture fades out while the next picture fades in
:   New pictures spread from the center and replace
:  Pictures switch in random waysWhen you select [MANUAL] (manual setting), the set effect is canceled.
•
AUDIOBy setting it to [ON], the audio from pictures recorded with audio can be played back during Slide Show.
•
•
•
3�
[SLIDE SHOW]Playing back pictures in order for  a fixed duration
1/2
MENU
PLAY
SELECTSET
SLIDE SHOWALL
FAVORITEROTATE DISP.ROTATE
PRINTOFFONMENU
SET
MENU
OFFOFF
ALL SLIDE SHOW
SELECT
DURATIONEFFECT
START
AUDIO
2SEC.
CANCELSET
MENU
SET
A B Ca 
						

							
Playback/Menu
LSQT1098

Playback intervals are estimates. Actual playback intervals vary according to pictures you play back and the card you are using.You can select [MANUAL] if you have selected [] in step 1 or [FAVORITE] using [SLIDE SHOW] button on the remote control.Press w/q to display the previous or next picture when [MANUAL] is selected.
When you set [AUDIO] to [ON] and then play back a picture with audio, the picture changes when the audio finishes.You cannot play back motion pictures and use power save in a slide show.
•
•
•
•
•
Press [MENUSET] to display the [PLAY] menu and selectand em to set. (P20)You can do the following if a mark has been added to pictures and they have been set as favorites.Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT ]) (P18)Play back the pictures set as favorites only as a slide show. (P21)Print only the pictures set as favorites. (P34)
Press r to select [ON] and then 
press [MENU/SET].
You cannot set pictures as favorites if 
[FAVORITE] is set to [OFF]. Also the favorites icon [] will not appear when [FAVORITE] is set to [OFF] even if it was previously set to [ON].You cannot select [CANCEL] if none of the pictures have [] displayed.
Press [MENU/SET] to close the 
menu.
Press w/q to select the picture 
then press e.
•
•
•
1�
•
•
2�
3�
[FAVORITE]Setting your favorite pictures
1/2
MENU
PLAY
SELECTSET
SLIDE SHOW
FAVORITEROTATE DISP.ROTATE
PRINTOFFONCANCELMENU
SET 
						

							
Playback/Menu
LSQT1098

Press [MENUSET] to display the [PLAY] mode menu and select the item to set. (P20)This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90° steps.
n Rotate display
(The picture is automatically rotated and displayed.)
Press r to select [ON] and then 
press [MENU/SET].
When you select [OFF], the pictures are displayed without being rotated.Refer to P13 for how to play back pictures.
Press [MENU/SET] to close the 
menu.
n  Rotate
(The picture is rotated manually.)
Press w/q to select the picture 
and then press r.
When [ROTATE DISP.] is set to [OFF], [ROTATE] function is disabled.
1�
•
•
2�
1�
•
Repeat the above procedure.If e is pressed while the [] favorites icon 
A is displayed, [] is cleared, and the favorites setting is canceled.You can place up to 999 pictures in your favorites list.
n  Canceling all favourites
1  
Select [CANCEL] on the screen shown in step 1 and then press [MENU/SET].
2  
Press e to select [YES] and then press [MENU/SET].
3  
Press [MENU/SET] to close the menu.
When printing pictures at a photo printing store, [ALL DELETE EXCEPT ] (P18) is useful so only the pictures you want to be printed remain on the card.You may not be able to put pictures you have shot on the equipment other than Panasonic into your favorites list.
••
•
•
•
A
100-00011/19
10:00  DEC.1.2006
100-0001
MENUSELECTEXITSET
ROTATE
1/19
[ROTATE DISP.]/[ROTATE]To display the picture rotatedj
b
1/2
MENU
OFFOFFON
PLAY
SELECTSET
SLIDE SHOW
FAVORITEROTATE DISP.ROTATE
PRINT
MENU
SET 
						

							
Playback/Menu
LSQT1098

Motion pictures and protected pictures cannot be rotated.
Press e/r to select the direction 
to rotate the picture and then 
press [MENU/SET].
aThe picture rotates clockwise in steps of 90°.
bThe picture rotates counter-clockwise in steps of 90°.
Press [MENU/SET] twice to close 
the menu.
•
2�
3�
n ExampleWhen rotating clockwise (a)
When you play the picture on a PC, you cannot play rotated pictures without an OS or a software compatible with Exif. Exif is the file format for still pictures, to which recording information and other can be added, established by JEITA [Japan Electronics and Information Technology Industries Association].When playing back rotated pictures in multi playback, pictures appear in original orientation.You may not be able to rotate images shot on the equipment other than Panasonic .
•
•
•
MENUSELECTSET
ROTATE
CANCEL
MENU
SET
Original picture 
						

							
Playback/Menu
LSQT1098

Press [MENUSET] to display the [PLAY] mode menu and select the item to set.(P20)DPOF (Digital Print Order Format) is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store.For more information please visit:http://panasonic.jp/dc/dpof_110/white_e.htm
Press e/r to select [SINGLE], [MULTI] or [CANCEL] and then press [MENU/SET].
You cannot select [CANCEL] if there are no prints that have been set in the DPOF print settings.
•
n Single setting
Press w/q to select the picture to 
print and then press e/r to set 
the number of prints.
The number of prints icon [d] appears.The number of prints can be set from 0 to 999. When the number of prints is set to “0”, DPOF print setting is canceled.
Press [MENU/SET] twice to close 
the menu.
n  Multi setting
Press w/q to select the picture to 
print and then press e/r to set 
the number of prints.
Repeat the above procedure. (You cannot set all the pictures at one time.)The number of prints icon [d] appears.The number of prints can be set from 0 to 999. When the number of prints is set to “0”, DPOF print setting is canceled.
Press [MENU/SET] twice to close 
the menu.
1�
••
2�
1�
•
••
2�
[DPOF PRINT]Setting the Picture to be Printed and the Number of Prints
PLAY2/2
MENUSELECTSET
PROTECTFORMAT
MENU
SET
DPOF PRINTSINGLEMULTICANCEL
1/19
1DISPLAY
1
MENU
DPOF SET THIS
COUNTDATE
EXITSELECT
100-0001
MENUSELECTEXIT
DPOF SET MULTI
1 234
5678
9101112
1
1DISPLAYCOUNTDATE
l 
						

							
Playback/Menu
LSQT1098

n To cancel all settings
Press e to select [YES] and then 
press [MENU/SET].
Press [MENU/SET] to close the 
menu.
n  To print the dateYou can set/cancel the printing with the recorded date each press of the [DISPLAY] button when setting the number of prints.
The date print icon [L] appears.When you go to a photo studio for digital printing, be sure to order the printing of the date additionally if required.The date may not be printed depending on photo studios or printers even if you set the date print. For further information, ask the photo studio for details or refer to the operating instructions of the printer.
1�
2�
••
•
DPOF is an abbreviation of [Digital Print Order Format]. This feature allows you to write print information to media and then use the information on a DPOF-compliant system.DPOF print setting is a convenient function when you print pictures with printers supporting PictBridge. (P33)The date printing setting on the printer may take priority over the date printing setting on this unit. Check the date printing setting on the printer also. (P33)When setting the DPOF print, delete any previous DPOF print settings made by the  equipment other than Panasonic.If the file is not based on the DCF standard, the DPOF print setting cannot be set. DCF is an abbreviation of [Design rule for Camera File system], stipulated by JEITA [Japan Electronics and Information Technology Industries Association].When setting the DPOF print with this unit, DPOF auto-print file is set in the 
MISC folder with the fixed date 2006/1/1.
•
•
•
•
•
•
MENU
CANCEL ALL DPOF
CANCEL ALL DPOFPRINT SETTINGS?
NOYES
SELECTSET
MENU
SET
1 
MEN U 
DPOF SET THIS 
SELECT EXIT 
DATE 100-00011/19 
1 DISPLAY COUNT DATE  
						

							
Playback/Menu
LSQT1098

Press [MENUSET] to display the [PLAY] mode menu and select the item to set. (P20)You can set protection for the pictures you do not want to delete to prevent them from accidental erasure.
Press e/r to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
n Single setting
Press w/q to select the picture 
and then press r to set/cancel.
SETThe protect icon [c] appears.
CANCELThe protect icon [c] disappears.
Press [MENU/SET] twice to close 
the menu.
1�
2�
n  Multi setting/To cancel all settingsPerform the same operation as in [[DPOF PRINT] Setting the Picture to be Printed and the Number of Prints]. (P25 and 26)
The protect setting may not be effective in the equipment other than Panasonic.If you want to delete protected pictures, cancel the protect setting first.While this feature protects the pictures from accidental erasure, formatting the card will permanently delete all data. (P28)Sliding the Write-Protect switch A of the SD Memory Card or the SDHC Memory Card to [LOCK] prevents pictures from deletion even if protection is not set.
The following functions cannot be used with protected pictures.−[ROTATE]
•
•
•
•
•
[PROTECT]Preventing Accidental Erasure of the Pictureg
PLAY2/2
MENUSELECTSET
DPOF PRINT
FORMAT
MENU
SET
PROTECTSINGLEMULTICANCEL
100 - 0001 1/19 
MEN U SET/CANCEL SELECT EXIT 
PROTECT THIS 
A 
						

							
Playback/Menu
LSQT1098

Press [MENUSET] to display the [PLAY] mode menu and select the item to set. (P20)Usually, it is not necessary to format the card. Format it when the message [MEMORY CARD ERROR] appears.
Press e to select [YES] and then press [MENU/SET].
Once the card is formatted, all data including protected images are irretrievably erased. Please confirm that all data is transferred to your PC before proceeding with format function.During formatting, do not turn the unit off.Sliding the Write-Protect switch of the SD Memory Card or the SDHC Memory Card to [LOCK] prevents formatting.If the card cannot be formatted, consult your nearest servicenter.
•
••
•
[FORMAT]Initializing a card0
MENU
DELETE ALL DATAON THE MEMORY CARD?
YESNO
FORMAT
SELECTSET
MENU
SET
For USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected]
For Canadian assistance, please call:  1-800-561-5505 or visit us at www.panasonic.ca 
						

							
Playback/Menu
LSQT1098

Settings
Change the settings if necessary.
Press [MENU/SET] and then 
press w.
Press r to select the [SETUP] 
menu icon [] and then press q.
Press e/r to select the menu 
item.
•
1�
2�
3�
Press q, press e/r to select the 
setting and then press [MENU/
SET].
See next page for more detailed settings.
Press [MENU/SET] to close the 
menu.
4�
•
5�
1/2PLAY
SELECT
SLIDE SHOW
FAVORITEROTATE DISP.ROTATE
PRINTONON
MENU 
SET 
MENUEXIT
MENU
1/1TV ASPECTLANGUAGE
SETUP
SELECTEXIT
ENG 
MENU
1/1TV ASPECTLANGUAGE ENG 
SETUP
SELECTEXIT
MENU 
SET 


TV ASPECT
SELECTMENUSET
(When you have selected “TV ASPECT”) 
						

							
Playback/Menu
0LSQT1098
MenuFunctions
 TV ASPECT[j]:
  Select if your television has a 16:9 aspect ratio.This mode is best for showing [j] aspect ratio images on a 16:9 aspect ratio television. Pictures shot in the [h] or [i] aspect ratio have black bands added to either side.[h ]:
  Select if your television has a 4:3 aspect ratio.When the aspect ratio is set to [h], pictures taken in the aspect ratios of [j] and [i] appear with black bands above and below on a 4:3 ratio television. 
•
•
{ LANGUAGESet to the language on the menu screen from the following 7 languages.Set to the desired language with e / r and determine it with [MENU/SET].[ENGLISH] : English [DEUTSCH]: German[FRANÇAIS] : French [ESPAÑOL]: Spanish
[ITALIANO]: Italian []: Chinese (Traditional)[]: JapaneseWhen you set to other language by mistake, select [{] from the menu icons to set the desired language.
•