Panasonic Dmr Xs350 Operating Instructions Manual

							51
RQT9439
Copying
Copy the playing title on the HDD to the disc. 
≥It will start copying from the beginning of the title regardless of the 
playing position. 
[HDD]  >  [RAM]  [-R]  [-R]DL]  [-RW‹V›]  [+R]  [+R]DL]  [+RW]
1Playback the title to copy.
When copying the title in DR mode with multiple audio, 
subtitles and Teletext
≥ Only the audio selected in the “Multi Audio” in the Disc menu 
will be copied for the multiple audio. ( >77).
≥ Subtitle displayed during playback will be copied.
Press [STTL  ] to display the subtitle.
Select the subtitle with “Subtitles” in the Disc menu ( >77)
≥ Teletext displayed during playback will be copied.
Press [TEXT  ] to display the Teletext.
2Press [OPTION].
3Press [ 3,4] to select “Copy Title 
Playing” and press [OK].
4Press [ 2,1] to select “Start” and 
press [OK].
To stop copying
Press and hold [RETURN ] for 3 seconds.
To return to the previous screen
Press [RETURN ].
Recording and playing while copying
You can record and play using the HDD while high speed copying.
Press [OK] to disappear the screen display.
≥ Still pictures and music recorded on the HDD cannot be played.
≥ To confirm the current progress
Press [STATUS ].
[Note]
≥ Timer recordings executed while copying are recorded to the HDD 
regardless of the recording drive settings.
(Only when high speed copying)
∫ Speed and recording mode when copyingTitles in DR, HG, HX, HE or HL modes
Titles in XP, SP, LP, EP or FR modes
§1  When the copy destination (disc) does not have enough space, 
copy will perform at normal speed in FR mode.
§ 2  Titles that were recorded with “Rec for High Speed Copy” ( >86) 
set to “Off” will be copied with normal speed.
In the following cases, even if “Rec for High Speed Copy” is set to 
“On”, copy will perform at normal speed.
≥ [+R]  [+R]DL]  [+RW]  When the copying source was recorded in 
“EP” or “FR (recordings 5 hours or longer)” mode.
≥ When the copy destination (disc) does not have enough space.
≥ When the title aspect for the copying source and the “Aspect for 
Recording” ( >86) setting do not match.
≥ When the title aspect for the copying source is 16:9:
–[+R]  [+R]DL]  [+RW]
– [-R]  [-R]DL]  [-RW‹V›]  copying source was recorded in “EP” or 
“FR (recordings 5 hours or longer)” mode.
Copy Title Playing
Copy destination Copy Speed Recording mode
[RAM]  
[-R]  [-R]DL]  [-RW‹V›]  
[+R]  [+R]DL]  [+RW] Normal speed FR 
Copy destination Copy Speed Recording mode
[RAM]  
High speed
§1Same as title to be 
copied§ 1
[-R]  [-R]DL]  [-RW‹V›]  
[+R]  [+R]DL]  [+RW]   High speed§
1, §2  Same as title to be 
copied§
1
To play DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R 
and +R DL on other players, it is necessary to finalise them after 
copy ( >82). To play +RW on other players, we recommend you 
create top menu ( >82), but they may not play on all DVD players.
DMRXS350EG-RQT9439-L_eng.book  51 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							52
RQT9439
Copying titles
You can order titles as desired for copy to disc.
[HDD] ,-.  [RAM]  [+RW]
[-RW‹VR›]  >  [HDD]
[HDD]  >  [-R]  [-R]DL]  [-RW‹V›]  [+R]  [+R]DL]
When copying the title in DR mode with multiple audio and 
subtitles 
≥ Only the audio and subtitles selected in the “Preferred Language” 
in the Setup menu will be copied for the multiple audio and 
subtitles. ( >85).
1While stopped
Press [FUNCTION MENU].
2Press [ 3,4] to select “Copy” and 
press [OK].
≥ If you are not going to change the each setting ( >step 7).
3Set the copy direction.
≥If you are not going to change the copying direction 
(> step 4).
1 Press [ 3,4] to select “Copy Direction” and press [ 1].
2 Press [ 3,4] to select “Source” and press [OK].
3 Press [ 3,4] to select the drive and press [OK].
If you select “HDD”, “Destination” is automatically set to 
“DVD”, or vice versa. ( > step  6)
4 Press [ 3,4] to select “Destination” and press [OK].
5 Press [ 3,4] to select the drive and press [OK].
The same drive as the copy  source cannot be selected.
6 Press [ 2] to confirm.
4Set the recording mode.
≥If you are not going to change the recording mode 
(> step 5).
1 Press [ 3,4] to select “Copy Mode” and press [ 1].
2 Press [ 3,4] to select “Format” and press [OK].
3 Press [ 3,4] to select “VIDEO” and press [OK].
4 Press [ 3,4] to select “Recording Mode” and press [OK].
5 Press [ 3,4] to select the mode and press [OK].
6 Press [ 2] to confirm.
5Register titles for copy.
≥If you are going to copy a registered list without making any 
changes to it ( >step 6).
1 Press [ 3,4] to select “Create List” and press [1 ].
2 Press [ 3,4] to select “New item” and press [OK]. 3
Press [ 3,4] to select the title and press the “Red” button.
A check mark is displayed. Repeat this step until you 
select all necessary items.
≥ Press the “Red” button again to cancel.
≥ The items will be copied in the order of the copying list. If 
you want to specify the order, repeat selecting one item at 
a time.
≥ Titles indicated with “ ” can not be copied in high 
speed mode.
≥ To show other pages
Press [ :, 9 ].
4 Press [OK].
≥ To edit the copying list ( >53)
You cannot start copying when the value of the “Size” 
( > 53) exceeds 100% (“Destination Capacity” is not 
sufficient).
5 Press [ 2] to confirm.
6Set other settings.
≥If you are not going to change these settings ( >step 7)
1 Press [ 3,4] to select “Other Settings” and press [ 1].
“Subtitles”
(Only when copying titles in DR mode and the recording mode 
other than High Speed is selected)
2 Press [ 3,4] to select “Subtitles” and press [OK].
3 Press [ 3,4] to select “Automatic” or “Off” and press [OK].
≥ “Automatic”:
Subtitle selected in the “Preferred Language“ in the Setup 
menu ( >85) will be copied.
≥ “Off”:
Subtitle in the source titles will not be copied.
“Finalise” or “Create Top Menu”
([HDD]  >  [-R]  [-R]DL]  [-RW‹V›]  [+R]  [+R]DL] [+RW]  only)
2 Press [ 3,4] to select “Finalise” or “Create Top Menu” and 
press [OK].
3 Press [ 3,4] to select “On” or “Off” and press [OK].
≥ If “On” is selected
–[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]After finalising, the discs 
become play-only and you can also play them on other DVD 
equipment. However, you can no longer record or edit.
– [+RW]  Create the Top Menu. Top Menu is a convenient 
function. We recommend you create the menu before 
playing a +RW disc on other equipment.
4 Press [ 2] to confirm.
7Press [ 3,4] to select “Start 
Copying” and press [OK].
8Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
To return to the previous screen in steps 1 to 7
Press [RETURN ].
To stop copying
Press and hold [RETURN ] for 3 seconds.
(You cannot stop while finalising or creating Top Menu)
Recording and playing while copying
You can record and play using the HDD while high speed copying. 
(Only when high speed copying without finalising or creating Top 
Menu). 
Press [OK] to disappear the screen display.
≥ Still pictures and music recorded on the HDD cannot be played.
≥ To confirm the current progress
Press [STATUS ].
[Note]
≥ Titles in the grouped titles and other titles cannot be registered 
simultaneously. 
≥ Timer recordings executed while copying are recorded to the HDD 
regardless of the recording drive settings.
(Only when high speed copying without finalising or creating Top 
Menu)
Copying using the copying list—Copy
Copy
HDD
DVD1
2
3Source
Destination
Cancel All
Copy Direction
Copy Mode
Create List
Start Copying
HDD   DVD
VIDEO   High Speed
Select the copy direction.RETURN
0
Information of the copy destination
- DVD-RAM
- Copy restricted titles can be 
copied on to disc
Copy
1
2
3
Cancel All
Copy Direction
Copy Mode
Create List
Start Copying
HDD   DVD
VIDEO   High Speed
Create copy list.
0
Page 01/01
Size:        0MB
Destination Capacity:  4343MBNo. Size
New item (Total=0) Title(  0% )
OKRETURNOPTION
OK
RETURNPage 001/001
Time
Rec time 0:52(SP)
Titles
Date Channel Time Title Name
OPTION
Select
01.01
01.01 1:35
12:36
1:13
AV 2
AV 1
25.05
Soccer Digest
1
1 2
Create List Grouped TitlesHDD
12:36
DMRXS350EG-RQT9439-L_eng.book  52 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							53
RQT9439
Copying
Copying list indicators
∫To check the properties of a title and sort 
Copying list
After performing step 5– 2 (> 52)1 Press [ 3,4] to select the title and press 
[OPTION].
2 Press [ 3,4] to select “Properties” or “Sort” 
and press [OK].
Properties:
The name, recording date, channel etc. of the selected title are 
shown. (You cannot select a title if it has a check mark.)
Sort (All Titles screen only):
Press [ 3,4] to select the item and press [OK].
This changes the way that titles are displayed. You can select to 
display titles by No., recording date, day, channel, recording start 
time and title name. (You cannot select a title if it has a check mark.)
If you close the Copying list screen, the display order is cancelled.
∫ To edit the copying listSelect the item after step 5– 4 (> 52)
1 Press [OPTION].
2 Press [ 3,4 ] to select the operation and press 
[OK].
Delete All:
Delete all items registered on the copying list.
Press [ 2,1] to select “Yes” and press [OK].
Add:
Add new items to the copying list.
1Press [ 3,4 ] to select the title and press the “Red” button.
A check mark is displayed. Repeat this step until you select all 
necessary items.
≥ Press the “Red” button again to cancel.
2 Press [OK].
Delete:
Delete the selected items.
Press [ 2,1] to select “Yes” and press [OK].
Move:
Move selected items or change the or der of items on the copying list.
Press [ 3,4] to select the destination and press [OK].
To cancel all registered copying setting and lists
After performing steps 1–2 ( >52)
1Press [ 3,4 ] to select “Cancel All” and press [OK].
2Press [ 2,1 ] to select “Yes” and press [OK].
≥ The settings and lists may be cancelled in the following situations.
– When a title, still picture, etc. has been recorded or deleted at the 
copy source
– When steps have been taken, for instance, to turn off the unit,  open the tray, change the copy direction, etc.
Copying list icons and functions
Titles that cannot be copied in high speed mode to 
the inserted disc
Title contains still picture(s)
≥Still picture(s) cannot be copied.
 (NTSC)
 (PAL) Title recorded using a different encoding system 
from that of the TV system currently selected on the 
unit.
≥
Titles displaying these marks cannot be selected.
Data size of each registered item
Size:
Data size recorded to the copy destination
≥When copying at normal speed, the total 
data size will change according to the 
recording mode.
≥ The total data size shown may be larger 
than the sum of the data sizes for each 
registered item, because of data 
management information being written to 
the copy destination, etc.
To play DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R and 
+R DL on other players, it is neces sary to finalise them after copy 
(> 82). To play +RW on other players, we recommend you create 
top menu ( >82), but they may not play on all DVD players.
Page 01/01
Size:        0MB
Destination Capacity:  4343MBNo. Size
New item (Total=0) Title(  0% )
Sort
Grouped Titles Properties
Add
Delete
Move Delete All
DMRXS350EG-RQT9439-L_eng.book  53 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							54
RQT9439
Copying titles
[DVD-V] >  [HDD]
You can copy the content of fi nalised DVD-R, DVD-R DL, DVD-RW 
(DVD-Video format), +R, and +R DL to the HDD and re-edit.
While playing a disc, the content being played is copied to the HDD 
according to the set time.
≥ When “Rec for High Speed Copy” ( >86) is set to “On” and you 
make a copy, the copy will be made using the picture size selected 
in “Aspect for Recording” ( >86) of the Setup menu.
Preparation
≥ Insert the finalised disc ( >15).
After performing steps 1–4 (“Format” is automatically set to “DVD-
Video”) (> 52, Copying using the copying list—Copy)
1Set “Copy Time”.
≥If you are not going to change the setting ( >step 2).
1 Press [ 3,4] to select “Copy Time” and press [ 1].
2 Press [ 3,4] to select “Time Setting” and press [OK].
≥ Setting the unit to copy all the content on the disc
3 Press [ 3,4] to select “Off” and press [OK].
4 Press [ 2] to confirm.
Copy will continue until t here is not enough available 
recording space on the HDD.
≥ Setting the copying time
3 Press [ 3,4] to select “On” and press [OK].
4 Press [ 3,4] to select “Copy Time” and press [OK].
5 Press [ 2,1] to select “Hour” and “Min.” and press [ 3,4 ] 
to set the recording time.
6 Press [OK].
7 Press [ 2] to confirm.
Copying to the HDD continues for the set time even after 
the content being played finishes.
≥ Set a few minutes longer than the source title, in order to 
include the operation time before play begins. 
2Press [ 3,4] to select “Start 
Copying” and press [OK].
3Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
The disc top menu is displayed. 
≥ Disc play automatically begins from title 1 when “Title 1” is 
selected from the “Auto-Play Select” menu when finalising 
the disc ( >82).
4When the top menu is displayed
Press [ 3,4,2, 1] to select the title 
you want to start copying, and press 
[OK].
While playing in order, all the titles after the selected title are 
recorded until the set time. (After the last title on the disc has 
finished playing the top menu is recorded until the set time is 
reached.)
To return to the previous screen in steps 1 to 3
Press [RETURN ].
To stop copying after step 3
Press [ ∫].
You can also press and hold [RETURN ] for 3 seconds to stop 
copying.
≥ If stopped partway, copying will be up to that point. 
[Note]
≥ The screen on the right is recorded at the 
beginning.
≥ The content is recorded as 1 title from the start of 
copy to the end.
≥ If play does not begin automatically or if the top 
menu does not display automatically, press 
[1] (PLAY) to start.
≥ Even if you copy a high quality video/audio DVD, the original 
picture and audio quality cannot be exactly replicated.
≥ If you want to copy a title from a DVD-RW (DVD Video Recording 
format), create a copy list and then copy ( >52, Copying using the 
copying list—Copy).
Copying a finalised DVD-R, DVD-R DL, 
DVD-RW (DVD-Video format), +R and 
+R DL
≥ Operations and on screen displays during copy are also 
recorded.
≥ Almost all DVD-Video on sale have been treated to prevent illegal 
copying, and cannot be copied.
Copy
1
2
3
Cancel All
Copy Direction
Copy Mode
Copy Time
Start Copying
DVD   HDD
DVD-Video  SP
Press OK to change the setting.
2:00
OKRETURN
Hour
2Min.
00
Set the time a few minutes longer. 
My favorite 01/0201
Chapter 1
03
05
02
04
06
Chapter 2
Chapter 3 Chapter 4
DMRXS350EG-RQT9439-L_eng.book  54 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							55
RQT9439
With Other 
Equipment
Recording broadcasts from external equipmentWith Other 
Equipment
Recording disc:  [HDD] 
Recording mode: XP, SP, LP, EP
Preparation
≥ Connect a Set Top Box to this unit’s input terminals ( >97).
≥ When the output signal from the external equipment is NTSC, 
change the “TV System” to “NTSC” in the Setup menu ( >89).
≥ Press [DRIVE SELECT] to select the HDD drive.
1While stopped
Press [INPUT SELECT] to select the 
input channel for the equipment you 
have connected.
2Press [REC MODE] to select the 
recording mode.
≥DR, HG, HX, HE, HL and FR mode cannot be selected.
3Select the channel on the other 
equipment.
4Press [ ¥REC].
Recording starts.
To skip unwanted parts
Press [ ;] to pause recording. (Press again to restart recording.)
To stop recording
Press [ ∫].
[Note]
≥ It will be recorded in standard definition quality even if the 
programme is in high definition.
≥ When this unit is in EXT LINK standby (“EXT-L” is shown on the 
unit’s display), this function does not work. Recording disc: 
[HDD] 
Recording mode: XP, SP, LP, EP
To record programmes from Set Top Box using timer programming
Preparation
≥ Make sure you connect the AV2 input terminal of this unit to the 
Scart terminal of a Set Top Box with a 21-pin Scart cable ( >97).
≥ Set “AV2 Input” to match the connected equipment in the Setup 
menu ( >90).
≥ Set “Ext Link” to match the connected equipment in the Setup 
menu ( >90).
1Make timer programming on the 
external equipment.
2Press [EXT LINK].
≥“EXT-L” lights on the unit’s display to indicate timer 
recording standby has been activated.
≥ The guidance information of EXT LINK appears.
To set external link standby using the FUNCTION MENU display
Perform step 1 ( >above)
1 Press [FUNCTION MENU].
2Press [ 3,4 ] to select “Others” and press [OK].
3Press [ 3,4 ] to select “Ext Link Standby” and press [OK].
To cancel the external control
1 Turn on this unit.
2 Press [EXT LINK] to stop recording or to cancel linked timer  recording standby. (“EXT-L” disappears.)
[Note]
≥ It will be recorded in standard definition quality even if the 
programme is in high definition.
≥ During EXIT LINK standby mode or recording, you cannot press 
[INPUT SELECT] to select external input other than AV2.
≥ In order to prevent accidental  operation, press [EXT LINK] to 
cancel the setting after recording is finished.
≥ This function does not work when “TV System” is set to “NTSC” in 
the Setup menu ( >89).
≥ This function does not work when recording from an external input 
other than AV2.
≥ This function does not work while recording 2 programmes 
simultaneously with timer recording.
≥ This function does not work with some equipment. Refer to the 
equipment’s operating instructions.
≥ The beginnings of recordings may not be recorded correctly in 
some cases.
≥ When “Ext Link” is set to “Ext Link  2”, this function does not work if 
the input signal is NTSC system.
≥ Programmes are recorded as one title on this unit when the end 
time of the earlier timer recording and the start time of the later 
timer recording are close to each other. 
To divide the titles, go to “Divide Title” ( >45).
≥ While the unit is in EXT LINK standby mode or recording, AV1 
output terminal outputs the signal which is input from the AV2 input 
terminal irrespective of “AV1 Output” setting ( >90).
≥ During EXIT LINK standby mode or recording, playback is 
available on both HDD and DVD drive. However, during EXIT LINK 
recording, still pictures or music cannot be played back.
≥ When “EXT-L” lights on the unit’s display, Direct TV Recording is 
unavailable.
Recording from Set Top BoxLinked timer recordings with external 
equipment (Set Top Box) — EXT LINK
Copying
DMRXS350EG-RQT9439-L_eng.book  55 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							56
RQT9439
Copying from a video equipment (video cassette recorder, etc.)
e.g., Connecting to the AV3 or DV input terminals on the front
≥Turn off the unit and other video equipment before connecting.
§Connect to terminals of the same colour.
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
When recording from the unit’s DV terminal
≥ Select the type of audio recording from “Audio Mode for DV Input” 
in the Setup menu ( >88).
≥ When recording from DV equipment (e.g., digital video 
camcorder), you can record audio/video recordings from DV tape 
only.
≥ When “Rec for High Speed Copy” ( >86) is set to “On” and you 
make a copy, the copy will be made using the picture size selected 
in “Aspect for Recording” ( >86) of the Setup menu.
16:9 image such as wide broadcasting ( >31)
[Note]
≥ If video is copied from another piece  of equipment to this unit, then 
the video quality will be degraded.
≥ While copying from DV input or  executing the “Flexible Recording 
via AV input” ( >57)
– Copy will stop when timer recording starts. 
– Chasing playback, simultaneous rec and play, switching of the  broadcast or input cannot be performed.  Recording disc: 
[HDD] 
Recording mode: XP, SP, LP, EP
Preparation
≥ Press [DRIVE SELECT] to select the HDD drive.
≥ When recording bilingual programmes, select “M1” or “M2” on the 
external equipment.
≥ When the output signal from the external equipment is NTSC, 
change the “TV System” to “NTSC” in the Setup menu ( >89).
1While stopped
Press [INPUT SELECT] to select the 
input channel for the equipment you 
have connected.
e.g., If you have connected to AV3 input terminals, select 
“AV3”.
2Press [REC MODE] to select the 
recording mode.
≥DR, HG, HX, HE, HL and FR mode cannot be selected. 
3Start play on the other equipment.
4When you want to start recording
Press [ ¥REC].Recording starts.
To skip unwanted parts
Press [ ;] to pause recording. (Press again to restart recording.)
To stop recording
Press [ ∫].
[Note]
When this unit is in EXT LINK standby (“EXT-L” is shown on the 
unit’s display), this function does not work.
Audio/Video
cable§
This unit
Other video equipment
Connect to Audio/Video output terminals.
DV cable
(IEEE 1394, 4-pin)
Manual recording
Almost all videos and DVD-Video on sale have been treated to 
prevent illegal copying. Any software (firmware) that has been 
so treated cannot be recorded using this unit.
DMRXS350EG-RQT9439-L_eng.book  56 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							57
RQT9439
With Other 
Equipment
Recording disc:  [HDD] [RAM]  [-R]  [-RW‹V›]  [+R]  [+RW]  
Recording mode: XP, SP, LP, EP
Preparation
1 Turn off this unit and DV equipment, then connect the equipment 
with the unit’s DV input terminal ( >56).
2 Turn on this unit.
≥ If you record to a disc, insert a disc ( >15).
≥ [RAM]  If the disc is protected, release protection ( >80, Setting the 
protection).
≥ When the output signal from the external equipment is NTSC, 
change the “TV System” to “NTSC” in the Setup menu ( >89).
1Turn on the DV equipment, and pause 
play at the point you want recording to 
start.
The following screen appears.
≥When the screen is not displayed
2Press [ 3,4] to select “Rec to HDD” 
or “Rec to DVD” and press [OK].
≥ It may take a while for the next screen to display while 
preparing to record. 
3Press [REC MODE] to select the 
recording mode.
≥DR, HG, HX, HE, HL and FR mode cannot be selected. 
4Press [ 2,1] to select “Start” and 
press [OK].
Recording starts.
To stop recording
Press [ ∫].
[Note]
≥ When this unit is in EXT LINK standby (“EXT-L” is shown on the 
unit’s display), this function does not work.
≥ Only one piece of DV equipment (e .g., Panasonic’s video camera, 
etc.) can be connected to the unit via the DV input terminal.
≥ It is not possible to operate the unit from the connected DV 
equipment.
≥ The DV input on this unit is for use with DV equipment only. (It 
cannot be connected to a computer, etc.)
≥ The DV equipment name may not be shown correctly.
≥ Depending on the DV equipment, the images or audio may not be 
input properly.
≥ The date and time information on the tape of the DV equipment will 
not be recorded.
≥ You cannot record and play simultaneously.
≥ [-R]  [+R]  It may not be able to record after repeating about 30 times 
of step 4 or recording or editing. 
≥ [-R]  [-RW‹V›]  After finalising, chapters for every 5 minutes will be 
created.
≥ [+R]  After finalising, chapters for every 8 minutes will be created.
≥ [+RW]  Regardless of creating top menu, chapters for every 
8 minutes will be created. Recording disc: 
[HDD] [RAM]  [-R]  [-RW‹V›]  [+R]  [+RW]  
Recording mode: FR
It is possible to record from equipment connected to the AV input 
terminals. 
Preparation
≥ [RAM]  If the disc is protected, release protection ( >80, Setting the 
protection).
≥ When the output signal from the external equipment is NTSC, 
change the “TV System” to “NTSC” in the Setup menu ( >89).
1While stopped
Press [INPUT SELECT] to select the 
input channel for the equipment you 
have connected.
e.g., If you have connected to AV3 input terminals, select 
“AV3”.
2While stopped
Press [FUNCTION MENU].
3Press [ 3,4] to select “Others” and 
press [OK].
4Press [ 3,4] to select “Flexible 
Recording via AV input” and press 
[OK].
5Press [ 3,4] to select “Rec to HDD” 
or “Rec to DVD” and press [OK].
≥ It may take a while for the next screen to display while 
preparing to record. 
6Press [ 2,1] to select “Hour” and 
“Min.” and press [ 3,4] to set the 
recording time.
≥ You cannot record more than maximum recording time.
7Start play on the other equipment.
8When you want to start recording
Press [ 2,1] to select “Start” and 
press [OK].
To exit the screen without recording
Press [RETURN ].
To stop recording partway
Press [ ∫].
To show the remaining time
Press [STATUS ].
[Note]
≥ When this unit is in EXT LINK standby (“EXT-L” is shown on the 
unit’s display), this function does not work.
≥ [-R] [+R]  It may not be able to record after repeating about 30 times 
of step 8 or recording or editing. 
≥ [-R]  [-RW‹V›]  After finalising, chapters for every 5 minutes will be 
created.
≥ [+R]  After finalising, chapters for every 8 minutes will be created.
≥ [+RW]  Regardless of creating top menu, chapters for every 
8 minutes will be created.
DV Automatic Recording
After performing step 1
1 Press [FUNCTION MENU].
2 Press [ 3,4] to select “Others” and press [OK].
3 Press [ 3,4] to select “DV Automatic Recording” and 
press [OK].
>  Go to step 2
If the DV automatic recording function does not work properly, 
check the connections and DV equipment settings, and turn the unit 
off and back on.
If that does not work, follow the instructions for manual 
recording ( >56).
DV Automatic Recording
Rec to DVD
Rec to HDD
Record from the DV unit?
OK
RETURN
Flexible Recording via AV input
RETURN
OK
Flexible Recording via AV input
Please set recording time. Record in FR mode.
Maximum recording time
Set recording time
Hour8Min.00StartCancel
8 hour 00 min.
DMRXS350EG-RQT9439-L_eng.book  57 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							58
RQT9439
Copy the HD Video (AVCHD format) or the SD Video (MPEG2 format)
It is possible to copy the HD video (AVCHD format) recorded on the Panasonic’s video camera, etc. to the HDD.
∫From an SD card or Discs
1Insert a disc or card.
≥Display items differ depending on what is recorded in each 
media. 
2Press [ 3,4] to select “Copy Video 
( AVCHD )” and press [OK].
3The confirmation screen appears and 
press [OK].
4Press [ 3,4] to select the title and 
press the “Red” button.
A check mark is displayed. Repeat  this step until you select all 
necessary titles.
≥ Press the “Red” button again to cancel.
(All the recordings on the same date become a title.)
5Press [OK].
6Press [ 2,1] to select “Start” and 
press [OK].
∫ From a video equipment
1Connect the Panasonic’s video 
camera, etc. to this unit.
2Select the appropriate mode that 
makes the Panasonic’s video camera 
ready for data transfer (such as “PC 
CONNECT”) on the Panasonic’s video 
camera, etc.
≥Refer to the camera’s operating instructions for detail.
≥ Display items differ depending on what is recorded in the 
USB device.
3Press [ 3,4] to select “Copy Video 
( AVCHD )” and press [OK].
4The confirmation screen appears and 
press [OK].
5Press [ 3,4] to select the title and 
press the “Red” button.
A check mark is displayed. Repeat this step until you select all 
necessary titles.
≥ Press the “Red” button again to cancel.
(All the recordings on the same date become a title.)
6Press [OK].
7Press [ 2,1] to select “Start” and 
press [OK].
To stop copying
Press and hold [RETURN ] for 3 seconds.
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [RAM]  [-R]  [-R]DL]  [-RW‹V›]  [+R]  [+R]DL]  [+RW]
Press [ 3,4] to select “DVD” and press [OK].
[SD]
Press [ 3,4] to select “SD Card” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK]. [Note]
≥
Record, playback, or timer recording cannot be executed while 
copying. 
≥ Copy cannot be executed while recording or playback.
≥ An AVCHD title with more than 100 scenes will be divided into titles 
every 99th scene and copied.
≥ Copied video will be displayed as “AVCHD” in the “Channel” 
column of the DIRECT NAVIGATOR screen. 
≥ Depending on the recording condition with the high definition 
camera, scenes recorded on same day might have different titles 
(“-1”, “-2” appended to date). 
≥ See the instructions of the equipment used to record.
≥ After copying AVCHD to HDD, it can be copied to DVDs with 
standard definition quality. It is not recommended to delete original 
AVCHD.
Copying HD Video (AVCHD format)
[AVCHD] (Disc) > [HDD]
[AVCHD] (SD card)  > [HDD]
HDD HDD
e.g.,  [SD]
SD Card
OK
RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
Copy Video ( AVCHD )
OKRETURNPage 01/01
Time       18:19
Rec time 
                 0:10
Size        120 MBDayDateNo. Channel Time Title Name
OPTION
01.01 01.01 1:35
12:36
1:13
SUN SAT
SAT
SUN
25.05
25.05 12:37
001
002
003
004
HDDSDDestination Capacity:   472583MBSize:         0MB(  0%)Total :     0
Select
HDD of Panasonic’s video camera, etc. 
> [HDD]
≥ You cannot playback HD Video in the HDD of Panasonic’s video 
camera, etc. with this unit.
You must copy the files to the HDD.
USB connection cable 
(specified cable such as accessory of the USB 
equipment)
Preparation
Turn on both this unit and the Panasonic’s video camera, etc.
HDD
USB
OK
RETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
DMRXS350EG-RQT9439-L_eng.book  58 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							59
RQT9439
With Other 
Equipment
It is possible to copy the SD video (MPEG2 format) recorded on the Panasonic video camera, etc. to the HDD or disc.
∫ From an SD card
1Insert a card.
≥Display items differ depending on what is recorded in the 
card.
2Press [ 3,4] to select “Copy Video 
( MPEG2 )” and press [OK]. 
3Press [ 3,4] to select “Start 
Copying” and press [OK].
How to copy
Refer to “Copying using the copying list—Copy” ( >52)
Please set the items in step 3 and 4 as shown below.
Copy Direction:
Source : SD CARD
Copy Mode: 
Format : VIDEO
≥ SD Video on an SD card are automatically registered on the 
copy list.
4Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
∫ From a video equipment
1Connect the Panasonic’s video 
camera, etc. to this unit.
2Select the appropriate mode that 
makes the Panasonic’s video camera, 
etc. ready for data transfer (such as 
“PC CONNECT”) on the Panasonic’s 
video camera, etc.
≥Refer to the camera’s operating instructions for detail.
≥ Display items differ depending on what is recorded in the 
USB device.
3Press [ 3,4] to select “Copy Video 
( MPEG2 )” and press [OK]. 
4Press [ 3,4] to select “Start 
Copying” and press [OK].
How to copy
Refer to “Copying using the copying list—Copy” ( >52)
Please set the items in step 3 and 4 as shown below.
Copy Direction:
Source : USB
Copy Mode: 
Format : VIDEO
≥ SD Video on the Panasonic’s video camera, etc. are 
automatically registered on the copy list.
5Press [ 2,1] to select “Yes” and 
press [OK] to start copying.
To stop copying
Press and hold [RETURN ] for 3 seconds.
If the menu screen ( >above) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [SD]
Press [ 3,4] to select “SD Card” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK]. [Note]
≥
You cannot playback SD Video on an SD card or in the HDD of the 
Panasonic’s video camera, etc. with this unit. You must copy the 
files to the HDD or a DVD-RAM.
≥ You cannot playback or record while copying SD Video.
Copying SD Video (MPEG2 format)
[SD]  >  [HDD] [RAM]
(All the recordings on the same date become a title.)
HDD
DVD-RAM 
SD Card
OK
RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
HDD of Panasonic’s video camera  > [HDD] [RAM]
(All the recordings on the same date become a title.)
USB connection cable 
(specified cable such as accessory of the USB 
equipment)
Preparation
Turn on both this unit and the camera.
HDD
DVD-RAM
USB
OK
RETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
DMRXS350EG-RQT9439-L_eng.book  59 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							60
RQT9439
Playing still picturesStill pictures
Still pictures
[HDD] [RAM]  [-R]  [-R]DL]  [CD]  [USB]  [SD]
≥ You can play still pictures recorded with a computer onto a DVD-R, 
DVD-R DL, CD-R/CD-RW, USB memory and SD card.
≥ You cannot play still pictures while recording or copying.
1[HDD]
Press [FUNCTION MENU].
[RAM]  [-R]  [-R]DL]  [CD]  [USB]  [SD]Insert the disc, the SD card or USB memory.The display below automatically appears.
≥ Display items differ depending on what is recorded in each 
media.
2Press [ 3,4] to select “Play Pictures 
( JPEG )” and press [OK].
∫ Switching the Picture View appearance[HDD]  [RAM]
Still pictures copied from SD cards and USB memories are 
grouped by the shooting date on Pictures by Date screen.
1 Press [OPTION].
2 Press [ 3,4] to select “View Album” or “Pictures by Date” 
and press [OK].
3Press [ 3,4,2, 1] to select the 
album of “Album” or date of “Pictures 
by Date” and press [OK].
≥ Picture list screen is displayed.
Picture View screen icons
To show other pages
Press [ :, 9 ].
4Press [ 3,4,2, 1] to select the still 
picture and press [OK].
≥ Press [ 2,1 ] to display the previous or next still picture.
≥ Useful functions during still picture play ( >61)
To return to previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
If the menu screen ( >left) is not displayed, display it by 
performing the following operation.
1 Press [FUNCTION MENU].
2 [RAM]  [-R]  [-R]DL]  [CD]
Press [ 3,4] to select “DVD” and press [OK].
[SD]
Press [ 3,4] to select “SD Card” and press [OK].
[USB]
Press [ 3,4] to select “USB” and press [OK].
CD
OK
RETURN
 
Slect file type.
Play Video ( DivX )
Play Pictures ( JPEG )
Play / Copy Music ( MP3 )
SD Card
OK RETURNSD card is inserted.
Play Video ( AVCHD )Play Pictures ( JPEG )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
USB
OKRETURNUSB device is inserted.
Play Pictures ( JPEG )Play Video ( DivX )
Play / Copy Music ( MP3 )Copy Video ( AVCHD )Copy Video ( MPEG2 )Copy Pictures ( JPEG )
[SD]
[USB]Disc
e.g., 
[CD]
Pictures by Date screen 
04.02.2007
To t a l  9
08.09.2006
To t a l  1 9
RETURN OK
SlideshowOPTIONPress OK to display pictures.
Picture View Pictures by Date
Page 01/01
001 002
Select
Album screen
Picture ViewAlbum
RETURN OKOPTION Slideshow
001002
To t a l  9
To t a l  1 9
Press OK to display pictures.
Page 01/01Select
Picture and Album protected.
[HDD]
Date that has not yet been viewed 
(Only still pictures copied with “Copy All Pictures 
( JPEG )” or “Copy New Pictures ( JPEG )”)
04.02.2007
Picture View
Page 001/001RETURN OKOPTIONSlideshowSelect
Pictures by Date
e.g., [HDD]
Picture list screen
DMRXS350EG-RQT9439-L_eng.book  60 ページ  ２０１０年１月１４日　木曜日　午後４時２０分