Panasonic Dmr Xs350 Operating Instructions Manual

							91
RQT9439
Convenient functions
(All factory default settings are indicated with underlined text.)
Others
Automatic StandbySelect how long the unit remains on when it is not being used.
[2 hours] [4 hours
] [6 hours] [Off]
Remote ControlChange the remote control code on the main unit and the remote 
control (the two must match) if  you place other Panasonic products 
close together.
[DVD 1
][ DVD 2][ DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1 Press [ 3,4] to select the code (“DVD 1”, “DVD 2” or 
“DVD 3”) and press [OK].
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button 
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
∫When the following indicator appears on the 
unit’s display
The unit’s remote control code
Change the code on the remote control to match the main unit’s 
(> step  2).
[Note]
Executing “Shipping Condition” in the Setup menu returns the main 
unit code to “DVD 1”. Change the remote control code to 1
(> step  2).
ClockThis unit usually obtains time and date information from digital 
broadcasts and automatically corrects the time several times a day. 
However, if the time is not set correctly, use the settings listed in the 
method below.
1Press [ 3,4 ] to select “Off” of “Automatic” and press [OK].
When you select “Off”
2 Press [ 2,1] to select the item you want to change.
The items change as follows:
Hour !#Minute!# Second!# Day!# Month!#Year
     ^--------------------------------------------------------- --------------------------------J
3 Press [ 3,4] to change the setting.
4 Press [OK] when you have finished the settings.
The clock starts.
∫To change the Time Zone When the time is not correct, set “Time Zone” (GMT -6 to + 6).
1 Press [ 3,4] to select “On” of “Automatic” and press [OK] in 
step 1. 
Auto clock setting starts. This takes a few minutes. 
“Automatic clock setting completed.” screen is displayed.
2 Press [ 1].
3 Press [ 3,4] to select the correct time zone and press [OK].
4 Press [RETURN ].
Clock
Time Automatic Time ZoneDate
Automatic
Please set the clock.
OK:  access     RETURN:  leaveOK
RETURN
15 453927 52009
Off
Time Zone > below
PIN Entry
This PIN will be used for following controlling
– DVD-Video playback
– Using VIERA CAST
≥Make a note of PIN in case you forget it.
1 Press  [3,4 ] to select the number, then press [ 1].
≥ You can also use the numbered buttons.
2 Repeat step  1 for enter 4-digit PIN.
3 Press [OK] to confirm.
Power Save
[On] Power consumption is minimized when the unit is turned to 
standby (> 111 ) .
[Off] It is possible to start quickly from standby mode.
≥ “Unit’s Display” ( >88) is fixed with “Automatic” when “Power 
Save” is set to “On”, and is changed to “Bright” when “Power 
Save” is set to “Off”.
≥ This function cannot be enabled  when the DLNA function is 
enabled in Home Network ( DLNA )  Settings or Server ( DLNA ) 
Settings. ( >90)
System Update (> 94)In order to update this unit’s so ftware (firmware) and to support 
system changes made by broadcasts , this unit periodically 
performs software (firmware) updates.
Press [OK] to show the following settings.
Software Update in Standby
[0:00 to 23:00]§When you set this unit to standby mode, 
software (firmware) updates and TV Guide 
data are downloaded automatically at the 
specified time.
[Off]
§ Default setting is “3:00”.
Software LicenceInformation about the software licence is displayed.
DivX RegistrationYou need this registration code to purchase and play DivX Video-
on-Demand (VOD) content ( >43).
Initialize≥Press [OK] to show the following settings.
Shipping ConditionAll the settings except for the ratings level and ratings PIN return 
to the factory preset. The timer recording programmes are also 
cancelled.
[Yes] [No
]
Default SettingsAll the settings other than the tuning settings, clock settings, 
language settings, disc language settings, ratings level, ratings 
PIN, remote control code, network settings etc. return to the 
factory presets.
[Yes] [No
]
OK
Remember the PIN.
PIN Entry
0000
DMRXS350EG-RQT9439-L_eng.book  91 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							92
RQT9439
Changing the unit’s settings
These settings are used if you will connect this unit to a network.
The connection to the Internet may take time or the internet may not 
be connected depending on the connection environment.
It is recommended that you use a broadband connection.
∫ Testing the connectionAlways test the connection when a LAN cable is connected or when 
new “IP Address / DNS Settings” have been made.
1 Press [FUNCTION MENU].
2 Press [ 3,4] to select “Others” and press [OK].
3 Press [ 3,4] to select “Setup” and press [OK].
4 Press [ 3,4] to select “Network Settings” and 
press [OK].
5 Press [ 3,4] to select “IP Address / DNS 
Settings” and press [OK].
6 Press [ 3,4] to select “Connection Test” and 
press [OK].
“Testing”: The test is in progress.
“OK”: The connection is completed.
“Failed”: Please check the connection and settings.
[Note]
≥ Perform the “Connection Test” also when any change was made to 
the “IP Address / DNS Settings”.
≥If the connection test fails, it may be necessary to set the MAC 
address of this unit at the router side. The MAC address can be 
displayed by selecting “Network Settings” and “IP Address / DNS 
Settings” in steps 1–5 ( >above).
∫Setting the IP addressIn most cases, default settings can normally be used without making 
any changes.
Set the IP address only when the router has no DHCP server 
functions or when the router’s DH CP server function is disabled.
After performing steps 1–5 ( >left)
6Press [ 3,4] to select “IP Address Auto-
assignment” and press [ 2,1] to select “Off”.
7Press  [ 3, 4] to select “IP Address”, “Subnet 
Mask” or “Gateway Address” and press [OK].
8 Enter numbers with the numbered buttons and 
press [OK].
≥After checking the specifications for your broadband router, 
enter each number.
If the number is unknown, then check the number of other 
devices such as personal computers connected via a LAN 
cable. Assign a different number fr om those of other devices for 
the “IP Address” and the same number for others.
≥ If a wrong number is entered, then press [DEL].
9Press [ 2,1] to select “Yes” and press [OK].
[Note]
≥The numeric input range is between 0 and 255.
∫ Setting the DNS-IPIn most cases, default settings can normally be used without making 
any changes.
When setting an assigned DNS server from your internet service 
provider, perform the following settings. 
After performing steps 1–5 ( >left)
6Press  [ 3, 4] to select “DNS-IP Auto-
assignment” and press [ 2,1] to select “Off”.
7Press  [ 3, 4] to select “Primary DNS” or 
“Secondary DNS”and press [OK].
8 Enter numbers with the numbered buttons and 
press [OK].
≥Follow the instructions given by  your internet service provider 
and enter the numbers.
If the number is unknown, then check the number of other 
devices such as personal computers connected via a LAN 
cable and assign the same number.
≥ If a wrong number is entered, then press [DEL].
9Press [ 2,1] to select “Yes” and press [OK].
[Note]
≥The numeric input range is between 0 and 255.
∫ Setting the connection speedWhen the connection test results in “Failed” after the IP and DNS-IP 
addresses are assigned, perform the following settings.
After performing steps 1–5 ( >left)
6Press  [ 3, 4] to select “Connection Speed Auto-
configure” and press [ 2,1] to select “Off”.
7Press  [ 3, 4] to select “Connection Speed 
Setting” and press [ 2,1] to select a 
connection speed.
≥ Select a connection speed in accordance with the environment 
of the network connected.
≥ When the settings are changed, the network connection may be 
disabled depending on the device.
Network Settings
Preparation
Connect to the network. (> 99)
RETURN
OK
IP Address / DNS Settings
Connection Test
BíBíBíBí
OnOn
OnOn
OnOn
:„:„:„:…:w:„:„:„:…:w:„:„:„:…:w:„:„:„:
						

							93
RQT9439
Convenient functions
∫ Setting the proxy serverIn most cases, default settings can normally be used without making 
any changes.
Please use this setting when instructed to by your Internet service 
provider.
≥Set the proxy server only after  the connection test is completed 
properly.
After performing steps 1–4 ( >92, Testing the connection)
5 Press [ 3,4] to select “Proxy Server Settings” 
and press [OK].
6 Press [ 3,4] to select “Connection Test” and 
press [OK].
7 Press [ 3,4] to select “Proxy Address” and 
press [OK].
(> 76, Entering text)
After the input of “Proxy Address” is completed
8 Press [ 3,4] to select “Proxy Port Number” and 
press [OK].
9 Enter numbers with the numbered buttons and  press [OK].
10Press [ 2,1] to select “Yes” and press [OK].
To set back to default setting 
After performing step 5 ( >above)
1 Press [ 3,4] to select “Initialize” and press [OK].
2 Press [ 2,1] to select “Yes” and press [OK].
∫ Setting the internet content (VIERA CAST)After performing steps 1–4 ( >92, Testing the connection)5 Press [ 3,4] to select “Internet Content 
Settings” and press [OK].
≥ Lock ( >90)
≥ Automatic Volume Control
Select “On”, the volume is controlled by this unit automatically. If 
you want to enjoy the original volume, set it to “Off”.
∫ Register the DLNA compatible equipment to this 
unit
After performing steps 1–4 ( >92, Testing the connection)
“Testing”: The test is in progress.
“OK”: The connection is completed.
Press [RETURN ] to exit.
“Failed”: Please check the connection and settings.
RETURN
Proxy Server SettingsInitializeProxy AddressProxy Port Number
OK
0Connection Test----
0
Proxy Port Number
Please input HTTP Proxy Server Port Number 
and press “OK”. The number will be set to “0” 
by pressing “OK” when there is no number 
input. 
Press “DEL” button if a wrong number
is entered.
0 - Number9
RETURN
Internet Content Settings
Automatic Volume Control
OK
On Off
Lock
≥
When connecting Panasonic DLNA compatible equipment
5 Select “Home Network ( DLNA ) Settings” and 
press [OK].
6 Select “On” and press [OK].
7 Select “Yes” and press [OK].
Access this unit from the connected DLNA compatible 
equipment within 10 minutes.
≥ Up to 4 devices can be registered.
≥ Even if it is Panasonic DLNA compatible equipment, you may not 
be able to register from Home Network ( DLNA ) Settings.
In such a case, register the equipment from Server ( DLNA ) 
Settings ( >below)
≥
When connecting non-Panasonic DLNA compatible equipment
5 Select “Server ( DLNA ) Settings” and press  [OK].
≥Up to 4 devices can be registered.
6 Select the MAC Address for the connected 
equipment and press [OK].
≥Up to 12 devices can display the MAC Address.
7 Select “Yes” and press [OK].
∫ Viewing video in this unit via the registered 
equipment ( >75, DLNA feature)
RETURN
Home Network ( DLNA ) Settings
Registered devices list
Set unit name
OK
Off
Home Network ( DLNA )
RETURN
Server ( DLNA ) Settings
MAC Address
OK
Off
Server ( DLNA ) function
DMRXS350EG-RQT9439-L_eng.book  93 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							94
RQT9439
Software (firmware) Update
Software (firmware) of this unit can be updated automatically by 
following method. 
≥ From broadcasts
≥ From Internet [network connection and setting is required. ( >92, 
99)] 
Update of the software (firmware) is done when it is in standby 
mode. 
Once the new software (firmware) is found, it will start the download 
of the software (firmware), and then the upload.
Download of the software (firmware) will start automatically when the 
power of this unit is turned off or when the set time comes ( >91)
≥ The time it takes to update depends on the connection.
– For Broadcast: About 2 to 4 hours
– For Internet: About 1 hour
(It may take longer than specified above to download because 
the download time differs depending on the network 
environment. It is recommended to be used in a broadband 
environment.) 
Time to start the download of the software (firmware) can be set 
arbitrarily. If you do not want to perform the software (firmware) 
update during the standby mode, set the Software Update in 
Standby in the Setup menu to Off. ( >91)
∫The unit’s display during the update
e.g., 
≥“SW-DL ” : Software (firmware) is downloading.
Download will stop when the power is turned on, or the timer 
recording starts.
≥ “START ” : Update of the software (firmware) will start once the 
download is completed.
≥ “UPD  / ” : Software (firmware) is updating.
≥ “FINISH ” : Updated of the software (firmware) has completed.
[Note]
≥If the timer recording is scheduled within the following time at the 
start of the download, the download will not be executed.
– For broadcast: Within 4 hours
– For Internet: Within 1 hour
≥ If downloading on this unit fails or this unit is not connected to the 
Internet, then you can download the latest software (firmware) from 
the following website and burn it to a CD-R to update the software 
(firmware).
http://panasonic.jp/support/global/cs/ ≥
Software (firmware) of CAM (compatible CI Plus) can be updated 
automatically from broadcasts.
≥ Availability of software (firmware) update is detected while viewing 
the programmes compatible with CI Plus.
Notification is displayed on the screen if available.
≥ Notice is not displayed in the following cases:
– When recording a programme
– When scheduled recording and update occur simultaneously
– When displaying FUNCTION MENU, DIRECT NAVIGATOR, etc.
Follow the on-screen instructions when updating.
∫ The unit’s display during the update
e.g., 
≥ If you did not update or if the notice for update did not display on 
the screen, you will be notified on the Digital Channel Information 
of the channel where the update for CAM was detected.
To perform an update, press the Red” button and follow the on-
screen instructions.
[Note]
≥Operations such as view, playback, or record cannot be performed 
while updating the CAM.
If you press the [ Í] on the remote control while updating the CAM, 
the power of this unit will turn off automatically after the update.
≥ For details, refer to your CAM’s op erating instructions or consult 
your dealer.
You cannot operate the unit until the update is complete. 
Removing the AC mains lead while the update is in progress 
may damage the unit. Don’t remove the AC mains lead during 
the update.
Update software (firmware) of this unit
CI Plus compatible CAM (Conditional 
Access Module) software (firmware) 
update
 1 ZDFAll DVB Channels12:55Change categoryCAM Upgrade InfoBruder0:50 - 2:30NowDolby D
EncryptedMULTI
/
DMRXS350EG-RQT9439-L_eng.book  94 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							95
RQT9439
Convenient functions
Other Settings
You can configure the remote control TV operation buttons to turn 
the television on/off, change the television input mode, select the 
television channel and change the television volume.
1Point the remote control at the 
television
While pressing [ ÍTV], enter the code 
with the numbered buttons.
Manufacturer and Code No.
2Test by turning on the television and 
changing channels.
≥ Repeat the procedure until you find the code that allows 
correct operation.
≥ If your television brand is not li sted or if the code listed for 
your television does not allow control of your television, this 
remote control is not compatible with your television.
[Note]
≥ If your television brand has more than one code listed, select the 
one that allows correct operation.
The HOLD function deactivates all buttons on the unit and remote 
control. Use it to prevent other people from operating the unit.
Press and hold [OK] and 
[RETURN ] 
simultaneously until “X 
HOLD” appears on the unit’s display.
If you press a button while the HOLD function is on, “X HOLD” 
appears on the unit’s display and operation is impossible.
To cancel the HOLD function
Press and hold [OK] and [RETURN ] simultaneously until “X 
HOLD” disappears.
Television operation
e.g., 01: [0] > [1] 10: [1]  > [0]
CH
PAGE
CHAV
TV
 DRIVE
SELECTVOL
2abc
5jkl
8
1
4
ghi
7p
3def
6mno
9w
Turn TV on/off
Input select Vo l u m eChannel 
Select
AIWA
35MITSUBISHI 05/19/20/47
BEJING 33 NEC36
BENQ 58/59 NOKIA 25/26/27/60/61
BRANDT 10/15 OLEVIA 45
CENTREX 66 ORION 05
CURTIS 05 PHILCO 41/48/64
DESMET 05 PHONOLA 05
ELEMIS 05 PROVIEW 52
FINLUX 61 RADIOLA 05
FUJITSU 53 SALORA 26
GOLDSTAR 05/50/51 SANSUI 05
GRADIENTE 36 SCHNEIDER 05/29/30
HIKONA 52 SELECO 05/25
INNO HIT 05 SIEMENS 09
ITT 25SONY 08
JVC 17/30/39/70 TELEFUNKEN 10/11/12/13/14
KOLIN 45 TEX ONDA 52
LG 05/50/51 TOSHIBA 16/57
MAG 52YAMAHA 18/41
Brand Code Brand Code
05
LOEWE 
WHITE 
WESTINGHOUSE07/46
Panasonic 01/02/03/04 METZ
05/28
AKAI 27/30 MIVAR 24
BEKO 05/71/72/73/74 NOBLEX 33
BP 09NORDMENDE 10
BUSH 05 ONWA 30/39/70
CHANGHONG 69 PEONY 49/69
DAEWOO 64/65 PHILIPS 05/06/46
DUAL 05PIONEER 37/38
FERGUSON 10/34 PYE 05
FUNAI 32/42/43/65/68
63/67 SAMSUNG
FISHER 21
SABA10
GOODMANS 05SANYO 21/54/55/56
GRUNDIG
05/69/75/76/77/7809 SEG
IRRADIO 30SINUDYNE 05
JINGXING 31/33/66/67/69
49 TCL
KDS 52TEVION 52
KONKA 62 THOMSON 10/15/44
HITACHI
05/22/23/40/41 SHARP 18
HOLD function
DMRXS350EG-RQT9439-L_eng.book  95 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							96
RQT9439
Additional connections
≥Connect to terminals of the same colour.
≥ Connect to terminals of the same colour.
COMPONENT VIDEO terminals can be used for either interlace or 
progressive output ( >115) and provide a purer picture than the 
VIDEO OUT terminal.
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some flickering, even if it is 
progressive compatible. Set the “Component Resolution” in Setup 
menu to “576i/480i” if you are concerned about it ( >90). This is the 
same for multi system televisions using PAL mode. ≥
Connect to terminals of the same colour.
Connecting a television with AUDIO/
VIDEO terminals
Connecting a television with 
COMPONENT VIDEO terminals
[Required^setting]
“Component Resolution” setting in the Setup menu ( >90)
OPTICALL AUDIO OUT (PCM/BITSTREAM)COMPONENT
VIDEO OUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
AUDIO IN
R         L VIDEO 
IN
Audio/Video cable
Television’s rear panel
This unit’s rear panel
OPTICALL AUDIO OUT (PCM/BITSTREAM)COMPONENTVIDEO OUTOUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
AUDIO INR         LPRPBYCOMPONENT VIDEO IN
Component
video cable
Audio cable Television’s rear panel
This unit’s rear panel
DO NOT  
Progressive output
This unit
CRT
Connecting a stereo amplifier
OPTICALL AUDIO OUT (PCM/BITSTREAM)COMPONENT VIDEO OUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
AUDIO IN
R         L
Audio cable
This unit’s rear panel
Amplifier’s rear panel
DMRXS350EG-RQT9439-L_eng.book  96 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							97
RQT9439
Convenient functions
[Required^setting]  
≥ “Digital Audio Output” in the Setup menu (> 87)
≥ When this unit is connected to an amplifier with an optical di gital audio cable and connected to a television with an HDMI cabl e, you can enjoy 
the highest quality of audio from the disc by setting “HDMI Audio Output” to “Off” in the Setup menu ( >89). In this case audio is only output 
from the amplifier not the television.
≥ Before purchasing an optical digital audio cable (not incl uded), check the terminal shape of the connected equipment.
∫With OPTICAL
Connecting VCR or Set Top Box (Terrestrial receiver, CATV, etc.)
MPONENTDEO OUTOUT
Y
RP
BPAV 1(TV)VIDEORGB/S VIDEO
AV 2  (EXT)VIDEORGB/S VIDEO
AV
This unit’s rear panel
VCR or Set Top Box’s 
rear panel 21-pin Scart cableConnect the unit directly to the television
If you connect the unit through an AV selector or 
video cassette recorder to the television, video 
signal will be affected by copyright protection 
systems and the picture may not be shown 
correctly.
≥
When connecting to a television with a built-
in VCR
Connect to the input terminals on the television 
side if there are both television and VCR input 
terminals.
Television
VCR
This unit
DO NOT 
Connecting an amplifier with a digital input terminal
LNB LNBIN 2
IN 2OPTICALDIGITAL AUDIO OUT (PCM/BITSTREAM)COMPONENT
VIDEO OUTAUDIOOUT
VIDEO
L
R
Y
RP
BP
OPTICAL IN
Optical digital audio 
cable
Do not bend sharply 
when connecting.
This unit’s rear panel
Insert the cable so its 
shape fl ts correctly 
Into the terminal. Amplifier’s rear panel
DMRXS350EG-RQT9439-L_eng.book  97 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							98
RQT9439
Additional connections
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital 
video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be  switched to 
1080p, 1080i or 720p HD video.
≥ This unit incorporates HDMI
TM (V.1.3a with Deep Colour, x.v.ColourTM) technology ( >114, 115). 
≥ Video sources converted to 1920 k1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true, 
native 1080p full-HD sources. See dealer for details.
≥ Please use High Speed HDMI Cables that hav e the HDMI logo (as shown on the cover).
≥ When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
[Note]
≥ If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down m ixed (>114) and 
output as 2 channels, even if connecting with an HDM I cable. (Some discs cannot be down mixed.)
≥ You cannot connect this unit to DVI dev ices that are incompatible with HDCP.
For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input 
terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at a ll when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
Connecting with an HDMI compatible television and receiver
Regarding VIERA Link “HDAVI ControlTM” functionWhen connecting with a Panasonic TV (VIERA)  or a receiver equipped with the “HDAVI Control” function, linked operations would be possible. 
[ > 72, Linked operations with the TV (VIERA Link “HDAVI ControlTM”/Q Link)]
≥ Non-HDMI-compliant cables cannot be utilised.
≥ It is recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
10BASE-T/
100BASE-TX
LNBLNBIN 1IN 1LNBLNBIN 2IN 2DIGITAL AUDIO OUT (PCM/BITSTREAM)COMPONENT VIDEO OUTOUTAUDIOOUT
VIDEO
L
R
Y
RP
BPAV 1(TV)VIDEORGB/S VIDEO
AV 2  (EXT)VIDEORGB/S VIDEO
1
2
COMMON INTERFACE
OPTICAL13V/18V
400mA max.
HDMI INHDMI OUT
AVHDMI IN
HDMI AV OUT
This unit’s rear panel HDMI cable
HDMI cable
Television’s rear
panel
Receiver’s rear 
panel[Required^setting]
≥Set “HDMI Video Mode” and “HDMI 
Audio Output” to “On” ( >89).
(The default setting is “On”.)
Fully wired 21-pin Scart cable
Connecting with a Panasonic TV 
(VIERA)
If the 21-pin Scart cable is 
connected, the following functions 
are available.
≥
Direct TV Recording ( >72)
≥ Pause Live TV programme ( >73)
DMRXS350EG-RQT9439-L_eng.book  98 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							99
RQT9439
Convenient functions
Following function will be available when this unit is connected to the network. 
≥ This document is assuming that you already have a broadband connection. 
≥ This connection is not necessary if following functions are not to be used. 
[Note]
≥ Refer to the operating instructions for the connected device.
≥ It may not work properly depending on the equipment or environment used. 
≥ Depending on the contract with the provider, you may not be able to  connect multiple numbers of terminals such as this unit or computers, or an 
additional fee might be required.
≥ Use only category 5 straight LAN cables  (STP) when connecting to peripheral devices.
≥ When operating the VIERA CAST, use high-speed internet service  no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps for HD (High 
Definition) picture quality by your local broadband company.
≥ If using slow Internet connection, the video may not be displayed correctly.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Network connection
Playing back from other 
equipment on the network You can enjoy the video saved on the HDD of this unit on DLNA compatible equipment connected via a 
network. (
>75)
Enjoying VIERA CASTTMYou can access a selection of Internet services  from the Home screen with VIERA CAST, for example 
YouTube, Picasa Web Albums. (Current as of December 2009) ( >74)
≥ VIERA CAST requires a broadband Internet connection.  Dial-up Internet connections cannot be used.
Automatically acquire the 
title of the CDAutomatically acquire the title of the CD or the information about the artist. (
>71)
Update the software 
(firmware) of this unit Automatically update the software (firmware) of this unit. (
>94)
≥ Update of the software (firmware) can be done from the broadcast too. 
≥ Make the necessary settings in “N etwork Settings” after connecting. ( >90)
10BASE-T/
100BASE-TXLNBLNBIN 1IN 1LNBLNBIN 2IN 2OPTICALDIGITAL AUDIO OUT (PCM/BITSTREAM)AC IN COMPONENT VIDEO OUTOUTAUDIOOUT
VIDEOLR
Y
RPBPAV 1(TV)VIDEORGB/S VIDEOAV 2  (EXT)VIDEORGB/S VIDEO
1
2
COMMON INTERFACE13V/18V
400mA max.
This unit’s rear panel
Internet
Straight LAN cableHub or broadband router
Telecommunications 
equipment (modem, etc) ≥
When your communication equipment (modem), etc. has no broadband 
router functions: Connect a broadband router.
When your communication equipment (modem), etc. has broadband 
router functions but there ar e no vacant ports: Connect a hub.
≥ The DLNA compatible device that is to be connected to the unit should 
be connected to the same hub or broadband router as the unit.
≥ Use a router that supports 10BASE-T/100BASE-TX. Straight LAN cable
DLNA compatible equipment
DMRXS350EG-RQT9439-L_eng.book  99 ページ  ２０１０年１月１４日　木曜日　午後４時２０分 
						

							100
RQT9439
Operations that can be performed simultaneouslyReference
(≤: Possible, –: Impossible)
§[AVCHD] It cannot playback.
≥ Simultaneous operation is not possible while executing the “DV Au tomatic Recording” or “Flexible Recording via AV input”. 
Language code list
Enter the code with the numbered buttons.
Operations that can be performed while recording or copying a title
Playback of HDDPlayback of discsPlayback of still 
picturesPlayback of music recorded on HDD
While recording to HDD in DR mode ≤≤–≤
While recording to HDD in XP, SP, LP, EP, or FR 
modes ≤
≤§– ≤
While recording from DV input ––– –
While copying in normal speed mode ––– –
While copying in high speed mode
[With finalising or creating Top Menu ( [+RW])] ––––
While copying in high speed mode
[Without finalising or creating Top Menu (
[+RW])] ≤
–––
Starting of the timer recording while executing other operation
Starting of timer recording possible during the following 
operationsStarting of timer recording not possible during the following 
operations
≥ Recording the title
§ 1,  §2,  §3
≥Playing the title§ 4
≥Editing the title
≥ Copying a title in high speed mode (without finalising or creating 
Top Menu)
– Only 1 programme can be recorded
≥ Executing “DV Automatic Recording”
§ 1,  §5
≥Executing “Flexible Recording via AV input”§ 1,  §5
≥Executing Pause Live TV§ 1,  §2
§ 1
Cannot be executed when “One cable” has been selected in Auto 
Setup ( >18, 83)
§2Executing operation will terminate when 2 programmes 
simultaneous recording cannot be performed.
§3While recording an encrypted broadcast, you cannot record 
another encrypted broadcast.
§4Playback of disc will terminate when the timer recording to disc is 
started while playing back from the disc.
§5Executing operation will be terminated. ≥
Copying a title in normal speed mode
≥ Copying a title in high speed mode (with finalising or creating Top 
Menu)
≥ Copying HD Video (AVCHD format)
≥ Editing still pictures or music
≥ Copying still pictures
≥ Copying music
≥ Formatting
≥ Finalising/Creating Top Menu ( [+RW])
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577 Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji:
7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178 Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686 Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai:
8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
DMRXS350EG-RQT9439-L_eng.book  100 ページ  ２０１０年１月１４日　木曜日　午後４時２０分