Panasonic Dmr Ez47 Operating Instructions Manual

							31
RQT8853
 Notes
 
If the desired audio is not recorded, select the kind of audio for 
“Select Audio Channel For DV Input” in the Setup menu (¼ 50).
 
[RAM] Programs are recorded as a single item; breaks in the 
images create chapters.
 
If you use video camcorders from other manufacturer’s these are 
not guaranteed to work.
 
It is not possible to operate the unit from the connected DV 
equipment.
 
The DV equipment name may not be shown correctly.
 
Date and time information is not recorded, even if displayed on the 
camcorder.
 
The DV IN terminal is not meant to be connected to a computer.
 
This unit uses a 4-pin “DV IN” connector;
Your DV camcorder may use a 4-pin or 6-pin external connector. 
Please consult your DV camcorder’s manufacturer to con rm 
correct external connection.
 
You cannot record discs and play discs simultaneously.
Connect the cable while the power to both the unit and 
the external device is off.
  Front on the unit
 
S VIDEOIN 2 VIDEO/MONO
AUDI O
R
L
4-pin DV Cable
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
  
DRIVE
 SELECT
 to select the DVD drive.
– External DV cannot be recorded to VHS.
  
REC MODE
 to select the recording 
mode for the disc (¼ 14).
  Insert a disc.
  Turn on the DV equipment and 
pause play on the DV equipment 
at the point you want recording to 
start.
DV connection detected.
CancelRecord to DVD
ENTER
DV camcorder connection
Start recording?
“DV camcorder 
connection” screen 
may appear.
   to select “Record to DVD” then 
ENTER
   to select “Rec.”,
then 
ENTER
Recording from a DV Camcorder
 Tips
When recording  nishes
The con rmation screen appears. 
Press [ENTER] to  nish DV camcorder recording.
To stop recording
Press [ STOP].
The con rmation screen appears. Press [ENTER].
 
If the DV camcorder recording function does not work properly, 
check the connections and DV equipment settings, and turn the 
unit off and back on. If that does not work, follow the instructions 
on page 30.
Preparation:
 
Turn on the unit.
 
[RAM] If the disc is protected, release protection 
(¼ 44).
When “DV camcorder connection” screen does not 
appear
Perform steps 1–4 (¼ above).
1.    With the unit stopped 
Press [FUNCTIONS].
2.    Press [, ] to select “Other Functions” then press [ENTER].
3.    Press [, ] to select “DV Camcorder Rec.” then press [ENTER].
You can proceed to step 6 (¼ right).
Advanced Features
.JOEC


.JOEC








 
						

							32
RQT8853
You can enjoy linked operations with the TV and receiver by using “HDAVI Control”.
Preparation
1. Connect this unit to your TV or receiver with an HDMI cable
(¼ 61).
2. Set “EZ Sync” to “On” (¼ 51). (The default setting is “On”.)
3. Set the “HDAVI Control” operations on the connected equipment (e.g., TV).
 
When using HDMI2 terminal of VIERA as “HDAVI Control”, set the input channel to HDMI2 on VIERA.
4.  Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so 
that the “HDAVI Control” function works properly.
When the connection or settings are changed, repeat this procedure.

1 This button is available only when this unit is on.
2 When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents 
from where playback started.
In this case, press [] or [] to go back to where playback started.

3 Depending on discs, the TV may not automatically turn on.
(When the TV is on)
Automatic input 
switching
When the TV is on and the following operations are performed, the TV’s input will 
automatically switch to HDMI input mode and the TV displays the corresponding 
action.
(Picture or sound may not be available for the  rst few seconds.)
Press [FUNCTIONS]

1, [PLAY]
2, [DIRECT NAVIGATOR], [SCHEDULE], etc.
If you operate the VHS when the unit is recording on the DVD drive, the output does not automatically switch.
(When the TV is off)
Power on link
When the TV is off and the following operations are performed, the TV will 
automatically turn on and displays the corresponding action.
(Picture or sound may not be available for the  rst few seconds.)
Press [
PLAY]
2, [DIRECT NAVIGATOR], [SCHEDULE], etc.
  [DVD-V]
3, etc.The TV is automatically turned on when you insert the discs or a tape without the accidental erasure 
prevention tab.
If you operate the VHS when the unit is recording on the DVD drive, the TV does not automatically turn on.
Power off link
When you turn the TV off, this unit is also automatically turned off. This unit 
automatically turns off even if the FUNCTIONS screen, the status message or the
on-screen menu is displayed, during playback.
Even if the TV is turned off, this unit will not turn off at the same time under the 
following conditions:
–when you press [ REC] and this unit is recording
–when scheduled recording is proceeding
–when copying
–when  nalizing, etc.
When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, the 
receiver will also turn off.
Linked Operations with the TV (EZ Sync TM “HDAVI Control TM”)
What is EZ Sync “HDAVI Control”?
EZ Sync “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV 
(VIERA) or receiver under “HDAVI Control”. You can use this function by connecting the equipment with the HDMI 
cable. See the operating instructions for connected equipment for operational details.
 
EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard 
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. 
As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
 
This unit supports “HDAVI Control 2” function.
  “HDAVI Control 2” is the newest standard (current as of February, 2007)
for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional 
HDAVI equipment.
 Notes
 
These functions may not work normally depending on the equipment condition.
 
About “HDAVI Control” function, read the operating instructions of the connected equipment (e.g., TV) too.
.JOEC


.JOEC








 
						

							33
RQT8853
Easy control only with VIERA Remote Control
If you connect this unit to the TV that has “HDAVI Control 2” function with HDMI cable, you can operate both units 
more conveniently.
You can operate this unit using the following buttons on the TV remote control.
[, , , ], [OK], [RETURN], [SUB MENU].
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
About the FUNCTIONS window (¼ 70)
Using the 
FUNCTIONS 
window to operate 
this unit 
Refer to TV operating instruction for operating the TV.
  Display this unit’s “FUNCTIONS” window using the TV 
remote control.
  If this unit is set to off, it will automatically turn on.
  Select the item you want to operate
 with the TV remote control, then
OK
Using the SUB 
MENU window to 
operate this unit
By using the TV remote control, you can play discs using the “Control Panel” 
(¼ below) and select the drive (DVD or SD).
The following cannot be operated when the VHS drive is selected on this unit.
Control Panel
ENTER
Drive SelectFUNCTIONS
e,g.,
SUB 
MENU
Select an item, 
then 
OK
Control Panel
FUNCTIONS
Top Menu [DVD-V[
Menu [DVD-V[
Drive Select
Rotate Right  (JPEG)
Rotate Left  (JPEG)
Zoom In  (JPEG)
Zoom out  (JPEG)Control Panel is 
displayed (
 below).
FUNCTIONS window is displayed
(
 above).
Top menu is displayed (
19).
Menu is displayed (
19).
Select the DVD or SD drive

.
Rotate the still pictures (
 22).
Enlarge or shrink the still picture
(
 23).
The VHS drive cannot be selected.
Using the Control 
Panel
Using the Control Panel, you can operate search backward, search forward, stop, 
etc. with the TV remote control.
Perform steps 1 and 2 of “Using the SUB MENU window to operate this unit”.
The Control Panel is displayed (¼ right)
While playing a recording or DVD-Video, etc.
– []: Pause, []:Stop, []: Search backward, []:Search forward, 
[OK]: Play, [EXIT]: Exit the screen.
While playing still pictures
– []: Stop, []:View previous picture, []: View next picture, 
[EXIT]: Exit the screen.
Advanced Features
Play
Exit Search Pause
Search
Stop
Control Panel
DVD-RAMFUNCTIONS Cartridge Protection Off
Disc Protection Off
ENTER
Other Functions
ProgramDelete
Playback
Copy
When you want to leave the TV on and turn off only this unit
Press [DVD/VHS POWER] on this unit’s remote control to turn off
When not using “HDAVI Control”
Set “EZ Sync” in the setup menu to “Off ” (¼ 51).
.JOEC


.JOEC








 
						

							34
RQT8853
Entering Text
  When viewing the Name screen.
_Recording Name
12345
ABC a
DE F d
GH I
NOg
JKL j
M
m
67890
bc
ef / %
hi $&
kl @
n]_o[
Space
Set
Delete
PQRS p
TUV t
WX Y Z wqrs ( )
uv { }-
xyz
`^|
! ?\
   .
   ,

:
;
ENTER
1234567890
  , , ,  to select 
characters, then 
ENTER
– Repeat this step to enter other characters.
  
STOP
 when you’ve  nished 
entering text.
 Tips
Using the numbered buttons to enter characters
e.g.: entering the letter “R”
1.   Press [7] to move to the 7th row.
2.   Press [7] twice to highlight “R”.
3.   Press [ENTER].
To enter a space
Press [ CANCEL] then press [ENTER].
To delete a character
Press [ PAUSE] on a character in the name  eld.
To cancel in the middle
Press [RETURN].
Characters will not be saved.
 Notes
Long recording names may not be displayed.
 Display examples
(1)   Current  media
(2)    Shows current recording or play status.
(3)    Channel information
(4)    Status of the other drive
(5)    The current date and time
(6)    Remaining recording time and recording mode
(e.g.: “1:45 SP” indicates 1 hour and 45 minutes 
in SP mode)
 
Disc remaining time may slightly differ between 
different models.
(7)   Elapsed play time/Recording mode
(8)   Elapsed recording time and recording mode
Only displayed when receiving a digital 
broadcast:
(9)   Channel
(10) Current  program
(11) Parental Rating of the program (¼ 53)
(12) Channel  caption
(13) Next  program
(14) Start and  nish times of the program
Status Messages
STATUS
– Press [STATUS] to cycle through available 
displays.
e.g.,
No Display
4 - 1 KPO-SD
English
4 - 1 KPO-SD
English
12/24 6:34 PM
T12    0:01.23 SPT12  0:12.34 SP Remain  1:45 SP
CH 4-
KPO-SDNow: FOOTBALL FOCUSPG: NR
12:00pm - 1:00pm
1:00pm - 2:00pm
DVD-RAM
Rec.
DVD-RAM
Rec.
Next: BASEBALL
VHS Rec.
VHS Rec.
The following messages and displays appear to let 
you know what operations are being performed and 
the status of the unit.
.JOEC


.JOEC








 
						

							35
RQT8853
Advanced Editing  
DRIVE
 SELECT
 to select the DVD drive.
 Tips
To exit the menu screen
Press [DIRECT NAVIGATOR].
To view other pages
Press [, , , ] to select “Previous” or “Next”, then press 
[ENTER].
– You can also press [, ] to view other pages.
Multiple editing
Select with [, , , ], then press [PAUSE]. (Repeat.)
– A checkmark appears. Press [PAUSE] again to cancel.
   [RAM] When the Album View screen 
is displayed, press 
A to switch to 
the Recordings screen. 
  , , ,  to select a recording.
– Multiple editing (¼ right, Tips)
Recording Properties
  
SUB MENU
 to display the menu list.
  To view more options
  Press [, ] to select “Edit Recording”, then 
press [ENTER].
 
Items that cannot be selected are gray.
e.g., [RAM]
Refer to 
“Editing 
Operations to 
Recordings” 
(¼ right).
If you select “View Chapters” (¼ 37)
Setup Protection
Cancel Protection
Change Thumbnail
Divide Recording
Edit Name
Properties
Edit 
Recording
View Chapters
Album View Delete 
Recording
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Recording Name
  ,  to select “Edit Name” then 
ENTER
– You can give a name for the recording (¼ 34). [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
  ,  to select “Properties”, then 
ENTER
– Recording information is shown (e.g., date, 
time).
No. 01
Date  1/  1/2007 Mon
Ch. 12Start 1:02 PM
Rec. Time  1:00(
SP)
FootballProperties
ENTER
Accessing the Recording View
Delete Recording
Editing Operations to Recordings
 Notes
 
You cannot edit during recording or copying.
 
[+R] [+R]DL] Management information is recorded in unused 
sections when you edit discs. The available space on these discs 
decreases each time you edit their contents. 
Recordings  Editing
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Important: Once deleted, contents cannot be recovered.
  ,  to select “Delete 
Recording”, then 
ENTER
   to select “Delete”, then ENTER
 Tips
 
Recording/Chapter
Normally, programs are recorded as a single item consisting of 
one chapter.
Recording
Chapter
Start End
[RAM] You can divide a recording into multiple chapters.
Recording
Chapter Chapter Chapter Chapter
After  nalizing, recordings are divided into chapters of the 
following lengths.
[-R] [-R]DL] [-RW‹V›]: Chapters are approx. 5 minutes long
[+R] [+R]DL]: Chapters are approx. 8 minutes long
 
Maximum numbers of items on a disc
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Recordings 99 49
Chapters Approx. 1000 Approx. 254
Perform steps 14 of “Accessing the Recording View”.
Perform steps 14 of “Accessing the Recording View”.
Perform steps 14 of “Accessing the Recording View”.
Advanced Features
Using menus to play 
still pictures (¼ 21)
.JOEC


.JOEC








 
						

							36
RQT8853
Recordings  Editing
 Notes
 
Divided recordings retain the name of the original.
 
A short amount of video and audio just before and after the 
division point gets cut out.
 
You cannot divide a recording when the resulting parts are too 
short or when the total number of recordings exceeds 99.
  ENTER at the point you want to 
divide.
– For quicker editing (¼ above, Tips)
– Selecting “Preview” then press [ENTER] 
plays the recording from 10 seconds prior, to 
10 seconds after the division point.
– To change the point to divide at: 
Restart play and press [, ] to select 
“Divide” then press [ENTER] to bring to the 
point where you want to divide.
   to select “Divide” then ENTER
– The recording is divided at that point.
Divide Recording
[RAM] 
Once divided, recordings cannot be recombined.
  ,  to select “Divide Recording” 
then 
ENTER
DIRECT NAVIGATORDivide RecordingDVD-RAMPreviewDivide
Exit
00005
08PlayPicture VideoB
A
  , to select “Exit” 
then 
ENTER
Perform steps 14 of “Accessing the Recording View” 
(¼ 35).
   to select “Yes”, then 
ENTER
The lock symbol appears 
when the recording is 
protected.
10 10/27 Mon
0708
8 10/27 Mon
-- --
DIRECT NAVIGATOR RecordiDVD-RAM
[RAM]
Use to prevent accidental erasure of recordings.
Setup Protection/Cancel Protection
  ,  to select “Setup Protection” 
or “Cancel Protection”, then 
ENTER
Perform steps 14 of “Accessing the Recording View” 
(¼ 35).
 Tips
For quicker editing
 
Use Search (¼ 19), Slow-motion Play or Time Slip (¼ 20) to  nd 
the desired point.
 
To skip to the start or end of a recording, press [] (start) or 
[] (end).
 
For better precision, use Slow-motion Play and Frame by Frame 
Viewing (¼ 20).
Change Thumbnail
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Changes the thumbnail picture shown in the Recordings 
screen.
  ,  to select “Change 
Thumbnail”, then 
ENTER
DIRECT NAVIGATOR Change ThumbnailDVD-RAMChange
Exit
0:01.05
:.Change
08
ENTER
Start play and select
the thumbnail position.
Picture VideoB
A
  PLAY to start play.
  ENTER at the point you want to use 
as your thumbnail.
– To change the thumbnail:
Restart play and press [, ] to select 
“Change” then press [ENTER] at the point you 
want to use as the thumbnail.
  ,  to select “Exit”, 
then 
ENTER
Perform steps 14 of “Accessing the Recording View” 
(¼ 35).
.JOEC


.JOEC








 
						

							37
RQT8853
Advanced Editing
  
DRIVE
 SELECT
 to select the DVD drive.
    [RAM] When the Album View screen 
is displayed, press 
A to switch to 
the Recordings screen. 
 Tips
To exit the menu screen
Press [DIRECT NAVIGATOR].
To view other pages
Press [, , , ] to select “Previous” or “Next”, then press 
[ENTER].
– You can also press [, ] to view other pages.
Multiple editing
Select with [, , , ], then press [PAUSE]. (Repeat.)
– A checkmark appears. Press [PAUSE] again to cancel.
  , , ,  to select a 
recording.
  ,  to select “View Chapters”, 
then 
ENTER
[RAM] 
Allows viewing and editing chapters individually.
Properties
Edit Recording
View Chapters
Album View Delete Recording
  
SUB MENU
 to display the 
menu list. 
  , , ,  to select a chapter.
– Multiple editing (¼ below, Tips)
  To play, ENTER
  To edit, 
SUB MENU
 to display the 
menu list.
Refer to “Chapter 
Operations” (¼ right).
You can go back to the Recordings Screen.
Combine Chapters
Delete Chapter
Create Chapter
View Recordings
Accessing the Chapter View
  ,  to select “Create Chapter” 
then 
ENTERDIRECT NAVIGATOR Create ChapterDVD-RAMCreate
Exit
0:43.21
Play08Picture VideoB
A
Perform steps 17b of “Accessing the Chapter View” (¼ left).
Create Chapter
  ENTER at the point you want to 
divide.
  ,  to select “Exit” then ENTER
Chapter Operations
 Tips
For quicker editing (¼ 36, Tips)
 Notes
A short portion of the recording just after the creation point may be 
lost.
Delete Chapter
Important:  Once deleted, recorded contents cannot be 
recovered.
  ,  to select “Delete Chapter”, 
then 
ENTER
   to select “Delete”, then ENTER
   to select “Combine” then ENTER
– The selected chapter gets combined with the 
next chapter.
Combine Chapters
  ,  to select “Combine 
Chapters”, then 
ENTER
Perform steps 17b of “Accessing the Chapter View” (¼ left).
Perform steps 17b of “Accessing the Chapter View” (
¼ left).
Chapters  Creating, Editing
.JOEC


.JOEC








 
						

							38
RQT8853
Still Pictures  Editing 
  
DRIVE
 SELECT
 to select the drive 
(DVD or SD).
     [RAM] When the Recordings screen is 
displayed, press 
B to switch to the 
Album View screen.
Accessing the Album/Picture View
Editing an album:
     , , ,  to select the album.
– Multiple editing (¼ right, Tips)
 
 Editing a still picture:
   1.  , , ,  to select the 
album which contains the still 
picture to edit, then 
ENTER
2.  , , ,  to select the still 
picture.
– Multiple editing (¼ right, Tips)
    
SUB MENU
 to display the menu list.
To view more options
  Press [, ] to select “Edit Album”, then 
press [ENTER].
Items that cannot be selected are gray.
e.g., [SD] Editing an album
Refer to 
“Album/Picture 
Operations” 
(¼ right) Refer to “Slideshow” (¼ 22)
To select another folder (¼ right, Tips)
Start Slideshow
Slideshow settings
Add Picture
Create Album
Edit Album
Copy to DVD
Select Root folder
Album Name
Delete Album
 Set Protection 
Cancel Protection
e.g., [SD] Editing a still picture
You can go back to the Album View screen.
Set Protection
Album View Delete Picture
Cancel Protection
Refer to “Album/Picture 
Operations” (¼ right).
 Tips
To view other pages
Press [, , , ] to select “Previous” or “Next”, then press 
[ENTER].
–You can also press [, ] to view other pages.
Multiple editing
Select with [, , , ], then press [PAUSE]. (Repeat.)
–A checkmark appears. Press [PAUSE] again to cancel.
To exit the menu screen
Press [DIRECT NAVIGATOR].
To return to the previous screen
Press [RETURN].
To select another folder
While the Album View screen is displayed
(Only if there is a multiple number of other folders recognizable)
1. Press [SUB MENU].
2. Press [, ] to select “Select Root folder”, then press [ENTER].
3. Press [, ] to select the desired folder, then press [ENTER].
Add Picture / Create Album
Perform steps 14 of “Accessing the Album/Picture 
View”.
    ,  to select “Add Picture” or 
“Create Album” then 
ENTER
     to select “Yes” then ENTER
    , , ,  to select the 
album containing picture to add, 
then 
ENTER
    ,  to select “Select pictures 
to copy” or “Copy all pictures”, 
then 
ENTER
If “Select pictures to copy” is selected:
Press [, , , ] to select the picture, 
then press [ENTER].
If “Copy all pictures” is selected:
All the still pictures in the album will be 
copied.
     to select “No” to  nish 
copying, then 
ENTER
– If you want to continue copying, select “Yes” 
and repeat steps 7–8.
Album/Picture Operations
Refer to “Copying Still Pictures” (¼ 40).
[RAM] [SD]
.JOEC


.JOEC








 
						

							39
RQT8853
Only when you select “Create Album”
  ,  to select “Yes” or “No”, then 
ENTER
If “Yes” is selected:
You can give a name for the album (¼ 34).
If “No” is selected:
The recording date of the  rst picture in the 
album becomes the album name.
Delete Album/Delete Picture
Important: Once deleted, contents cannot be recovered.
  When deleting an album, non-picture files in the 
album will also be deleted. (This does not apply to 
subordinate folders in the album.)
Perform steps 14 of “Accessing the Album/Picture 
View” (¼ 38).
    ,  to select “Delete”, then 
ENTER
    ,  to select “Delete Album” or 
“Delete Picture” then 
ENTER
Set Protection / Cancel Protection
Set protection to prevent pictures from being accidentally 
deleted.
Perform steps 14 of “Accessing the Album/Picture View” 
(¼ 38).
    ,  to select “Set Protection” 
or “Cancel Protection” then 
ENTER
     to select “Yes” then ENTER
–The lock symbol “” appears when the still 
picture or the album is protected. 
 Notes
Even if you set protection using this unit, album may be deleted by 
other equipment.
Album Name
    ,  to select “Album Name” 
then 
ENTER
– You can give a name for the album (¼ 34). Perform steps 14 of “Accessing the Album/Picture View” 
(¼ 38).
 Notes
Album names entered using this unit may not display on other 
equipment.
Advanced Editing
.JOEC


.JOEC








 
						

							40
RQT8853
Copying Still Pictures
  Copying Still Pictures via the Album View 
Screen
[RAM] [SD]
[SD] The screen shown below may be displayed when you 
insert an SD card.
ENTER
SD Card inserted.
Select an action or press RETURN.
SD Card Operations
Go to Album View
Copy pictures
Press [, ] to select “Copy pictures”, then press [ENTER].
You can proceed to step 5 of “Copying All Still Pictures on a Card” 
(¼ right).
To exit the screen
Press [RETURN].
   
SlideshowPrevious
02/02Next
3/10/05 Total8 007 0084/10/05 Total6
DIRECT NAVIGATOR Album View
ENTERS
Picture Video
Page
B
A
Press ENTER to go to
Picture View   
Photo: 3/10/2005 My Album2
SUB MENU
DVD-RAM
- - - - - - - - -- - -
  [RAM] When the Recordings screen is 
displayed, press 
B to switch to the Album 
View screen. 
  , , ,  to select an album, 
then 
SUB MENU
  ,  to select “Copy to SD” or 
“Copy to DVD”, then 
ENTER
  
DRIVE
 SELECT
 to select the drive 
(DVD or SD).
    ,  to select “Start copying”, 
then 
ENTER
–Copying starts.
Copying All Still Pictures on a Card
    
DRIVE
 SELECT
 to select the SD drive.
    ,  to select “Other 
Functions”, then 
ENTER
    ,  to select “Copy” then ENTER
–Copying starts.
    ,  to select “Copy all 
Pictures”, then 
ENTER
  Copy All Pictures (JPEG)
Copy from
SD card
Copy to
DVD
With the unit stopped
  
 Notes
To stop copying in the middle
Press and hold [RETURN] for 3 seconds.
If still pictures are already contained inside the copy destination 
folder, the new still pictures will be copied following the existing still 
pictures.
If the space on the destination drive runs out or the number of 
 les/folders to be copied exceeds the maximum, copying will stop 
partway through.
Even if you input a name to the copy source folder, you cannot put 
the same name to the copy destination folder and  les.
 Tips
To return to the previous screen
Press [RETURN].
Multiple editing
Select with [, , , ], then press [PAUSE]. (Repeat.)
– A checkmark appears. Press [PAUSE] again to cancel.
To select another folder
While the Album View screen is displayed
(Only if there is a multiple number of other folders recognizable)
1. Press [SUB MENU].
2. Press [, ] to select “Select Root folder”, then press [ENTER].
3. Press [, ] to select the desired folder, then press [ENTER].
 Tips
When copying  nishes
The con rmation screen appears.
Press [ENTER] to  nish copying.
To view other pages
Press [, , , ] to select “Previous” or “Next”, then press 
[ENTER].
– You can also press [, ] to view other pages.
.JOEC


.JOEC