Home > Panasonic > DVD Recorder > Panasonic Dmr Ez47 Operating Instructions Manual

Panasonic Dmr Ez47 Operating Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Dmr Ez47 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21
    RQT8853
     Tips
    To stop viewing a picture
    Press [ STOP].
    To exit the menu screen
    Press [DIRECT NAVIGATOR].
    To view other pages
    Press [, , , ] to select “Previous” or “Next”, then press 
    [ENTER].
    You can also press [, ] to view other pages.
    To select the still picture or album with the numbered buttons
    Still picture on [CD] /Album on [RAM] [SD]
    e.g., “5”:  [0] ¼ [0] ¼ [5]
       “15”:  [0] ¼ [1] ¼ [5]
    Still picture on [RAM] [SD]
    e.g., “5”:  [0] ¼ [0] ¼ [0] ¼ [5]
       “15”:  [0] ¼ [0] ¼ [1] ¼ [5]
     Notes
     
    Still pictures (JPEG) recorded on DVD-RAM, CD-R/RW or SD 
    Memory Cards can be played on this unit.
    You can use 8MB to 2GB SD memory cards, 4GB SDHC memory 
    cards (¼ 75). For inserting and removing SD cards (¼ 73).
    Still pictures cannot be played during recording on the DVD drive 
    or copying.
     
    Thumbnails for large JPEG  les and images with aspect ratios 
    other than 4:3 may not display.
    Playing Still Pictures (JPEG)
      
    DRIVE
     SELECT
     to select the drive (DVD or
     SD) .
    [RAM] [SD]
     1.  , , ,  to select an 
    album, then 
    ENTER
    –The Picture (JPEG) View screen appears.
     2.  , , ,  to select a 
    picture, then 
    ENTER to view. 
    [CD]
     , , ,  to select a picture, 
    then 
    ENTER to view.
    [RAM] [SD] [CD]
     
    Slideshow
    Previous
    02/02Next
    10/27/2006 Total8
    007008
    10/27/2006 Total6
    DIRECT NAVIGATOR Album ViewDVD-RAM
    ENTERS
    Picture Video
    Page
    B
    A
    Press ENTER to go to
    Picture View
    Photo: 3/10/2005 My Album2
    SUB MENU
    - - -
    - - -- - - - - -
    PreviousPage 01/01Next
    001Folder 100__DVD002003004
    005006007008
     009--- ---
    Pictures Menu Picture (JPEG) View
    Play
    CD (JPEG)
    ---
    [RAM] When the Recordings screen is 
    displayed, press 
    B to switch to the Album 
    View screen.
    [CD] The screen shown below is displayed when you insert 
    a disc containing MP3  les, DivX video contents and still 
    pictures (JPEG).
    e.g.,
    ENTER
    Playback mode is set to DivX. 
    To play another type of files,
    please select playback mode
    from Menu in FUNCTIONS.
    1. Press [ENTER] to exit the screen.
    2. Press [FUNCTIONS].
    3. Press [,] to select “Menu”, then press [ENTER].
    4. Press [,] to select “Pictures”, then press [ENTER].
    Advanced Features
    [SD] The screen shown below may be displayed when you insert 
    an SD card (¼ 73).
    ENTER
    SD Card inserted.
    Select an action or press RETURN.
    SD Card Operations
    Go to Album View
    Copy pictures
    Press [, ] to select “Go to Album View”, then press [ENTER].
    You can proceed to step 3a (¼ below).
    [RAM] [SD]
    Album View screen
    [CD]
    Picture (JPEG) View screen
    .JOEC.JOEC 
    						
    							22
    RQT8853
     Notes
      To return the picture to its original position
    Press [, ] to select the opposite rotation in step 2, then press 
    [ENTER].
     
    Rotation information is not stored for CD still pictures, when a disc 
    is protected, when playing on other equipment, or when copying 
    still pictures.
    Slideshow
    Rotate Pictures
     Tips
    To stop the Slideshow
    Press [ STOP].
    To change the rate at which pictures are displayed
    [RAM] [SD]
    1  In step 2 above, press [, ] to select “Slideshow settings”, then     
    press [ENTER].
    2  Press [, ] to select “Slide Interval”.
    3  Press [, ] to select desired interval (0 to 30 seconds), then 
    press [ENTER].
    [CD]
    1  In step 2 above, press [, ] to select “Slide Interval”, then press 
    [ENTER].
    2  Press [, ] to select desired interval (0 to 30 seconds), then 
    press [ENTER].
    [RAM] [SD] To repeat play
    1  In step 2 above, press [, ] to select “Slideshow settings”, then     
    press [ENTER].
    2  Press [, ] to select “Repeat Play”.
    3  Press [, ] to select “On”, then press [ENTER].
    [RAM] [SD]
    1a    From the Album View screen
    , , ,  to select an album, 
    then 
    SUB MENU
    [CD]
    1b  From the Picture (JPEG) View screen
     
    , , ,  to select “Folder”, 
    then 
    SUB MENU
    Start SlideshowSlideshow settings
      
    ,  to select “Start 
    Slideshow” or “Start
    Slide Show”, then 
    ENTER
    Start Slide Show
    Slide Interval
    Control PanelRotate Right
    Rotate Left
    Zoom In
    ENTER
      ,  to select “Rotate 
    Right” or “Rotate Left”, 
    then 
    ENTER
    While playing a picture
     
    SUB MENU
    Selecting Still Pictures in Another Folder
     Notes
    You cannot operate the scroll bar that appears in the Folder screen.
     Tips
    To return to the previous screen
    Press [RETURN].
      From the Picture (JPEG) View screen
    , , ,  to select “Folder” 
    then 
    ENTER
    CD-RW/JPEG
    /JPEG/JPEG1/
    /JPEG/JPEG2/
    /MP3/
    MP3/MP3 group1/
    MP3/MP3 group2/(&WMA)/
    MP3/MP3 group2/(Layer)/
    MP3/MP3 group2/(Layer)/WMA/
    /No File/
    /PCdate/
    /WMA/
    /WMA/WMA/
    /WMA/WMA/
    ENTER
    Pictures Menu
    CD (JPEG)Folder
    F 1/ 2
    :  Selected Folder no./Total Folder no.
    If the folder has no compatible JPEG  le, 
    “--” is displayed as the folder no.
    :  Selected Folder
      
    ,  to select the desired folder, 
    then 
    ENTER
    [RAM] [SD]
    This function is only available if multiple folders are 
    recognized.
     
    ,  to select “Select Root 
    folder” then 
    ENTER
      
    ,  to select the desired 
    folder, then 
    ENTER
    From the Album View screen 
    SUB MENU
    [CD][RAM] [SD]
    Playing Still Pictures (JPEG)
    [CD] 
    .JOEC.JOEC 
    						
    							23
    RQT8853
    Advanced Features
    Zoom
     While playing a picture
     SUB MENU
      To zoom in:Control PanelRotate Right
    Rotate Left
    Zoom In
    ENTER
      ,  to select “Zoom 
    In”, then 
    ENTER
     Notes
    To return the picture to its original size
    Press [, ] to select “Zoom out” in step 2, then press [ENTER].
     
    When zooming in, the still picture may be cut off.
     
    “Zoom In” information is not stored.
     
    “Zoom In” and “Zoom out” do not work with images that have a 
    resolution larger than 640480 pixels.
    Picture Properties
    While playing a picture 
    STATUS twice to display picture properties.
     11/30  12:03 AM
    Date  11/26/2006            002/030
    Shooting Date
     
    STATUS again, to exit.
     Notes
    Depending on the camera or editing software; shooting dates may 
    not be displayed correctly.
    .JOEC.JOEC 
    						
    							24
    RQT8853
     Tips
     
    “” indicates the track currently playing.
    To stop playing
    Press [ STOP].
    To exit the menu screen
    Press [DIRECT NAVIGATOR].
    To view other pages
    Press [, ].
    To select the track with the numbered buttons
    e.g., “5”:  [0] ¼ [0] ¼ [5]
       “15”:  [0] ¼ [1] ¼ [5]
     
    DRIVE
     SELECT
     to select the DVD drive.
     Notes
     
    When there is a large amount of still picture data etc. within an 
    MP3  le, play may not be possible.
     
    You cannot operate the scroll bar that appears in the tree screen.
     Tips
      To return to the track list
    Press [RETURN].
    The screen shown below is displayed when you insert a disc 
    containing MP3  les, DivX video contents and still pictures 
    (JPEG).
    e.g.,
    ENTER
    Playback mode is set to DivX. 
    To play another type of files,
    please select playback mode
    from Menu in FUNCTIONS.
    1. Press [ENTER] to exit the screen.
    2. Press [FUNCTIONS].
    3. Press [,] to select “Menu”, then press [ENTER].
    4. Press [,] to select “MP3 Music”, then press [ENTER].
    Using the Tree Screen to Find a Group
    Playing MP3s
      
    001-Both Ends Freezing
    002-Lady Starfish
    003-Life on Jupiter 
    004-Metal Glue 
    005-Paint It Yellow
    006-Pyjamamama
    007-Shrimps from Mars
    008-Starry Blue
    009-Velvet Cuppermine
    010-Ziggy Starfish
    Page 001/024
    1
    1    :  My favorite
    2
    3
    4
    5
    6 
    7
    8
    9
    10  Total                   Track                           Tr e eG            1
    T             3
    To t a l        3/111
    Menu
    0   –   9No.
    Group No.
    Prev.Next
    ENTER
    Selected group
    Track list is shown.
    :  Group No.
    :  Track No. in the group
    :   Track No./Total tracks in all 
    groups
      ,  to select a track, then ENTER 
    to play.
      From the track list
     while a track is highlighted to 
    display the tree screen.
    Tr e eG          1/3Menu
    No.
    G             1
    T              1
    Total           1/49
    CD-RW for Check
    /JPEG/
    /JPEG/JPEG1/
    /JPEG/JPEG2/
    /MP3/
    MP3/MP3 group1/
    MP3/MP3 group2/
    MP3/MP3 group2/
    0   –   9
    :   Selected Group No./Total Group No.
    If the group has no compatible track, “--” is 
    displayed as the group number.
    :   Selected Group
      ,  to select a group, then 
    ENTER
    – The track list for the selected group appears. [CD]
    24
    RQT8853
    .JOEC.JOEC 
    						
    							25
    RQT8853
     Tips
    To view other pages
    Press [, ].
    To stop playing
    Press [ STOP].
    To exit the menu screen
    Press [DIRECT NAVIGATOR].
    To select the recording with the numbered buttons
    e.g., “5”:  [0] ¼ [0] ¼ [5]
       “15”:  [0] ¼ [1] ¼ [5]
    ]CD] When you insert a disc containing MP3 files, DivX video 
    contents and still pictures (JPEG), the files selection screen 
    appears. (¼ 24, right column, Tips)
    Press [ENTER].
     Notes
    You can play CD-R/CD-RW, DVD-R and DVD-R DL discs which 
    contain DivX video contents that have been recorded on a 
    computer.
    Picture sizes set at the time of recording may prevent the unit from 
    showing pictures ratio in the proper aspect ratio. You may be able 
    to adjust the aspect ratio through the TV.
    Successive play is not available.
      
    DRIVE
     SELECT
     to select the DVD drive.
     ,  to select the recording,then 
    ENTER
    [-R] [-R]DL] [CD]
    Using the Tree Screen to Find a Folder
    From the DivX  le list
       while a recording is highlighted 
    to display the tree screen.
     DivX MenuFolder
    Image001
    Image002
    Image003
    Image005
    Image006
    Image007
    Image008
    Image009
    Image010
    DATA1
    DATA2 Image004
    ENTER
    VIDEOF   1/11
    CD (DivX)
    :   Selected folder No./Total folder No.
    including DivX recording
    :   Selected folder
     ,  to select a folder, then ENTER
     – The  le list for the folder appears.
      CD (DivX)
    ENTERPrevious Next
    DivX MenuNo.DivX RecordingsTr e e
    Page      001/003Recordings :  020001     Movie01.avi
    Movie02.avi
    Movie03.avi
    Movie04.avi
    Movie05.avi
    Movie06.avi
    Movie07.avi
    Movie08.avi
    Movie09.avi
    Movie10.avi 002
    003
    004
    005
    006
    007
    008
    009
    010
    Folder1  :   VIDEO
    DivX  le list is shown.
     Tips
    To return to the previous screen
    Press [RETURN].
    Regarding DivX VOD content
    DivX Video-on-Demand (VOD) content is encrypted for copyright 
    protection. In order to play DivX VOD content on this unit, you  rst need 
    to register the unit.
    Follow the online instructions for purchasing DivX VOD content to enter 
    the unit’s registration code and register the unit.
    For more information about DivX VOD, visit www.divx.com/vod
    Display the unit’s registration code.
    (¼ 48, “DivX Registration” in the “Setup” menu)
    Setup
    DiscVideoAudioDisplay
    DivX Registration
    TV ScreenENTERVHS
    DivX (R) Video On Demand
    Your registration code is :   XXXXXXXX
    To learn more visit www.divx.com/vodSetupChannel
    After playing DivX VOD content for the  rst time, a new registration 
    code is then displayed in “DivX Registration”. Do not use this 
    registration code to purchase or rent DivX VOD content. If you use 
    this code to purchase (rent) DivX VOD content, and then play the 
    content on this unit, you will no longer be able to play any content that 
    you purchased (rented) using the old code.
    If you purchase or rent DivX VOD content using a registration code 
    different from this unit’s code, you will not be able to play that content. 
    (“Authorization Error” is displayed.)
    Regarding DivX content that can only be played a set number of 
    times
    Some DivX VOD content can only be played a set number of times. 
    When you play this content, the remaining number of plays is 
    displayed. You cannot play this content when the number of remaining 
    plays is zero. (“Rental Expired” is displayed.)
    When playing this content
    The number of remaining plays is reduced by one if:
    –you press [ DVD/VHS POWER].
    –you press [ STOP].
    –you press [].
    –you press [, ] etc. and arrive at the end of the content or the 
    start of the content being played.
    –you press [DRIVE SELECT] to change the drive.
    –you press [DIRECT NAVIGATOR].
    Resume play function does not work.8 alphanumeric characters
    Playing DivX
    Advanced Features
     Notes
     
    You cannot operate the scroll bar that appears in the tree screen.
    .JOEC.JOEC 
    						
    							26
    RQT8853
     Notes
     
    The speed of Jet Search (27 or 35) can be speci ed via the 
    Setup menu (¼ 51).
     
    Recordings made in EP or VP mode may experience distortions or 
    vertical scroll at 35 times speed. If so, change speed to 27 times.
     
    Depending on your TV, the picture may not be in color or may be 
    distorted.
     
    Jet Search is automatically canceled after 10 minutes.
     Notes
     
    Depending on the tape or an operating condition, the rewind 
    speed may change somewhat.
     
    The tape counter is reset to “0:00.00” when the tape is rewound to 
    the beginning.
     
    Depending on the tape, this function may not work.
     Tips
    For quicker operation
     
    Hold [, ] to start cue/review and release the button to 
    restart normal playback.
     Notes
    Slow playback is automatically canceled after 10 minutes.
     Notes
    Cue/review is automatically canceled after 10 minutes.
    Advanced Video  Cassette  Playback
    With the unit stopped
     FF to fast-forward the tape.
     
    REW
     to rewind the tape.
    During playback
    PA U S E
     Press and hold for about 
    2 seconds.
    – Press [ PLAY] to restart normal playback.
    During playback
     FF to cue later portions of the tape.
    REW to review portion just played.
    – Press [ PLAY] to restart normal playback.
    During playback
     FF  twice to Jet Search forward.
     
    REW  twice to Jet Search in reverse.
    – Press [ PLAY] to restart normal playback.
    TIME SLIP/     JET REW
    Fast-forward/Rewind
    Slow playback
    Cue/Review
    Jet Search
    Jet Rewind
    Allows to quickly review a portion of the video just 
    played, or cue later portions of the tape.Allows high speed search of video in forward or reverse 
    direction.
    Video tapes will rewind to the beginning of the tape at 
    higher-speed.
    .JOEC.JOEC 
    						
    							27
    RQT8853
     Notes
     
    Up to 20 index signals can be searched in either direction.
     
    If you overshoot in either direction, press the opposite button to 
    correct.
     
    For correct operation, make recordings of at least 5 minutes to 
    ensure that index signals are not spaced too closely together.
    VHS Index Search System (VISS)
    The unit automatically records special index signals on a 
    tape every time a recording is started (via [
     REC], or a 
    scheduled recording). The index search function makes 
    use of these index signals to help you  nd the beginning 
    of a desired program quickly and easily.
    While stopped or during normal play
     
     or .
    –
     Each press increases the number of skips.
    –
     Press [ STOP] to cancel the search.
    S-VHS Quasi Playback (SQPB)
    This unit can play tapes recorded in S-VHS. 
     
    Some picture noise may occur depending on the type 
    of tape used.
     
    It is not possible to fully obtain the high resolution 
    S-VHS is capable of. 
     
    This unit cannot record in S-VHS.
    Advanced Features
     Notes
    Only works if there is at least 5 seconds blank space at the end of 
    the program. 
    When the tape reaches the end of the program, it will 
    automatically rewind to the beginning and play again. 
    Repeat Playback
    During playback or while stopped
    PLAY
     Press and hold for about 5 or 
    more seconds. 
    – Repeat Playback goes on inde nitely until you 
    cancel it.
    – The “RPt” indication appears on the unit’s display.
    –
     Press [ STOP] to stop play.
     Tips
    To remove the noise from a paused picture:
    Start slow play (¼ 26), then adjust the tracking.
    Manual Tracking
    During playback
    TRACKING/V-LOCK
    CH
     or 
    TRACKING/V-LOCK
    CH
    – Repeat until the picture noise disappears.
    To return to auto tracking:
    TRACKING/V-LOCK
    CH
     (simultaneously).
    The unit usually makes tracking adjustments 
    automatically, but you may need to do it manually if noise 
    appears on a tape recorded on other equipment.
    Adjusting the playback picture
    Adjust the vertical synchronization to stop the picture 
    from shaking while paused.
    Vertical Locking Adjustment
     Notes
     
    This function may not work with some tapes.
     
    You can also adjust vertical synchronization with [CH , ] on the 
    main unit.
    While paused
    TRACKING/V-LOCK
    CH
     or 
    TRACKING/V-LOCK
    CH
    – Repeat until the shaking stops.
    To return to the standard position:
    TRACKING/V-LOCK
    CH
     (simultaneously).
     Notes
     
    This function may not work with some tapes.
     
    You can also adjust the tracking with [CH , ] on the main unit.
    .JOEC.JOEC 
    						
    							28
    RQT8853
    Advanced Video  Cassette  Playback
    Stereo  Mono L  Mono R
     No display (Normal audio track) 
    Changing Audio during Playback
    AUDIOA repeatedly, to select the audio 
    option.
     Tips
    Auto Bilingual Selection Function [VHS]
    When a stereo broadcast or multilingual broadcast is recorded 
    and played back on the unit, stereo sound will be automatically 
    selected in the case of a stereo broadcast and SAP sound will be 
    automatically selected in the case of a multilingual broadcast.
    – This function may not work properly if the program is played back 
    from a mid point. In a case like this, press [AUDIO] and select the 
    right sound. 
    – The function will not work with a cassette which has been recorded 
    from the external equipment. 
     Notes
    Remaining tape time display
     
    The displayed time is approximate.
     
    The displayed time will be incorrect if you set the wrong tape 
    length in “Select Tape Length” in the Setup menu (¼ 51) and if the 
    tape is of poor quality.
    On-screen Display Indicators
    STATUS
     to display on-screen indicators.
    VHS
      Mono L0:00.22
     SP 
    
    VHS drive indicator
    
    Shows which sound mode is selected as follows: 
    Stereo:
      Hi-Fi stereo audio
    Mono L:
      Mono L audio of the Hi-Fi stereo 
    audio
    Mono R:
      Mono R audio of the Hi-Fi stereo 
    audio
    No indicator:
      Normal audio
    
    Operation status
    
    Shows the tape counter and remaining tape time
    Pressing [STATUS] to cycle the display as follows:
    No display  Tape counter
     Remaining tape time 
     
    Press [ CANCEL] to reset the tape counter 
    (elapsed time) to “0:00.00”. The tape counter 
    is automatically reset when inserting a video 
    cassette.
    
    Video cassette-in indicator
    
    Recording mode (¼ 14)
     Tips
    To exit on-screen indicators
    Press [STATUS] several times.
    The following on-screen indicator will not be displayed 
    when this unit is connected to the TV with the DVD 
    PRIORITY output terminals or HDMI AV OUT terminal. 
    This indicator is only displayed when playing a tape in 
    this unit’s VHS drive. The items displayed may differ 
    depending on the operating conditions. 
    .JOEC.JOEC 
    						
    							29
    RQT8853
    Playing Playlists
      
    DRIVE
     SELECT
     to select the DVD drive.
    With the unit stopped
      
      ,  to select “Playlists”, then
    ENTER
      ,  to select “Other Functions” 
    then 
    ENTER
    FUNCTIONSDVD-RAM
    Program
    CopyDelete
    Other Functions
    Disc Protection OffPlaylists
    DV Camcorder Rec.Flexible Recording
    SetupDVD Management
    ENTER
    Playback
      , , ,  to select the playlist 
    to play, then 
    ENTER
    After selecting a playlist (step 5)
      ,  to select “Properties”, then 
    ENTER
    – Playlist information (e.g., length and date) is 
    shown.
    Playlist Properties
      
    SUB MENU
    Advanced Features
    [RAM] [-RW‹VR›]
    You cannot create or edit playlists on this unit. However, 
    you can play a playlist that has been created or edited on 
    other equipment.View Chapters
    After selecting a playlist (step 5)
      ,  to select “View Chapters”, 
    then 
    ENTER
      
    SUB MENU
      , , ,  to select the 
    chapter, then 
    ENTER
     Tips
    To return to the playlist screen
    Press [SUB MENU], then select “View Playlists” and press [ENTER].
    To view other pages
    Press [,].
    .JOEC.JOEC 
    						
    							30
    RQT8853
    Preparation:
     
    Turn on the unit and connected equipment.
     
    [RAM] If the disc is protected, release protection 
    (¼ 44).
     
    [VHS] Ensure accidental erasure tab is intact.
     
    When recording multilingual broadcasts (¼ 13)
     
    DRIVE
     SELECT
      to select the drive (DVD or 
    VHS). 
      Insert a disc or VHS cassette.
      
    REC MODE
     to select the recording 
    mode (¼ 14).
     
    INPUT SELECT
    Recording from an External Device
    Recording from a VCR, etc.
    Connect cables while the power to both the unit and the 
    external device is off.
      Front on the unit
    S VIDEOIN 2 VIDEO/MONO
    AU DIO
    R
    L
    S VIDEOIN 2 VIDEO/MONO
    AU D I O
    R
    L
    You can get a 
    sharper, clearer 
    picture by connecting 
    with an S Video cable 
    instead of the yellow 
    video cable.
    Yellow White  Red
    S Video cable
    Audio/video 
    cable
    [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
    Perform steps 15 left.
      Start play on the external device.
     
    REC
     at the point you want to 
    start recording to the disc.
      
    PA U S E
     to start recording at the 
    point you desire.
    Perform steps 15 left.
      
    PLAY
     to bring the tape to the 
    point at which you want to start 
    recording from.
      
    PA U S E
     when you reach that point.
      
    REC
     to put the unit in recording 
    standby.
      Start play on the external device.
    Recording to VHS
    Recording to DVD
     Tips
     
    You can also connect to the IN1 on the rear.
     
    If the audio output of the other equipment is monaural, connect to 
    L/MONO on the IN2 input terminals at the front.
     Tips
    To skip unwanted parts
    Press [ PAUSE] to pause recording. (Press again to restart 
    recording.)
    To stop recording
    Press [ STOP].
    IN1TV
    IN2
    DV
    ENTER
    Input Select
    2
    3
    4 1  ,  to select the input 
    where your external 
    device is connected, 
    then 
    ENTER
    – Front Panel inputs are IN2.
    .JOEC.JOEC 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Dmr Ez47 Operating Instructions Manual