Panasonic Dmr Ez28 Operating Instructions Manual

							31
RQT9046
Advanced Features
Slideshow with soundtrack
It is possible to play MP3 music recorded on a USB 
memory during a Slideshow.
Preparation:
Insert a USB memory containing MP3 files.
 From the Album View screen
 
e, 
r, 
w, 
q to select an album, 
then
 
e, 
r to select 
“Slideshow w/ SNDTRK”, 
then SNDTRK Folder
Slideshow w/ SNDTRK
 Tips
To select an MP3 folder to be played1.  In step 2 above, press [
e, 
r] to select “SNDTRK Folder”, then 
press [OK].
2.  Press [
w, 
q] to select the folder, then press [OK].
Rotate Pictures
  While playing a picture
 
 
e, 
r to select “Rotate 
Right” or “Rotate Left”, 
then 
Rotate Left
Control Panel
Zoom In Rotate RightOK
FUNCTIONS
 Notes
To return the picture to its original positionPress [
e, 
r] to select the opposite rotation in step 2, then press [OK].
Rotation information will not be stored.
-R -R DL CD Still pictures
When disc or album is protected
When played on other equipment
When copying pictures •
–
–
–
–
Zoom
  While playing a picture
 
  To zoom in
 
e, 
r to select “Zoom 
In”, then Rotate Left
Zoom In Rotate Right
Control Panel
FUNCTIONS
OK
 Notes
To return the picture to its original size
Press [
e, 
r] to select “Zoom out” in step 2, then press [OK].
When zooming in, the still picture may be cut off.
“Zoom In” information is not stored.
“Zoom In” and “Zoom out” do not work with images that have a 
resolution larger than 640 x 480 pixels.
Picture Properties
While playing a picture
  twice to display picture properties.
11/30  12:03 AM
11/26/2006 Date 0002/0030
Shooting Date
  again to exit.
 Notes
Depending on the camera or editing software, shooting dates may 
not be displayed correctly. •
•
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							32
RQT9046
RAM -RW(VR)
You cannot create or edit playlists on this unit. However, 
you can play a playlist that has been created or edited 
on other equipment.
  to select the DVD drive.
  With the unit stopped
 
 
e, 
r 
to select “Other Functions” 
then 
 
e, 
r to select “Playlists”, then 
 
e, 
r, 
w, 
q to select the playlist 
to play, then 
Playlist Properties/View Chapters
Perform steps 1–4 above.
 
e, 
r, 
w, 
q to select the playlist, 
then 
To show playlist properties
6a 
e, 
r to select “Properties”, then 
Playlist information (e.g., length and date) is shown.
To view chapters
6b 1.  
e, 
r 
to select “View Chapters”, 
then 
 2.  
e, 
r, 
w, 
q to select the 
chapter, then 
–
 Tips
To return to the playlist screen
Press [SUB MENU], then select “View Playlists” and press [OK].
To view other pages
Press [
u, 
i].
The following messages and displays appear to let you 
know what operations are being performed and the 
status of the unit.
Press [STATUS] to cycle through available displays.
1:45  SP 12/24  6:34 PM
CH 4-1
KPO-SDNow: FOOTBALL FOCUS
No Display
Next: BASEBALL
PG: NR
T12   0:01.23  SPg ggT12    0:12.34  SP
Rec.
English
Tray Open
DVD-RAM
4 - 1 KPO-SD
Rec.
English
Tray Open
DVD-RAM
4 - 1 KPO-SD
Remain    
e.g.,A
B
C
D
E
GH
IJ K
LM NF
12:00pm - 1:00pm
  1:00pm - 2:00pm
–
g Display  examples
A Current media
B Shows current recording or play status
C Channel information
D Status of the other drive
E The current date and time
F Remaining recording time and recording mode
  (e.g.: “1:45 SP” indicates 1 hour and 45 minutes in 
SP mode)
Disc remaining time may slightly differ between 
different models.
G Elapsed play time/Recording mode
H Elapsed recording time and recording mode
Only displayed when receiving a digital broadcast:
I Channel
J Current program
K Parental Rating of the program (➔ 47)
L Channel caption
M Next program
N Start and finish times of the program•
Status Messages Playing Playlists
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							33
RQT9046
Advanced FeaturesAdvanced FeaturesAdvanced Features
FUNCTIONS Window
 When viewing the Name screen.
_Recording Name
12345
ABC a
DE F d
GH I
NOg
JKL j
M
m
67890
bc
ef / %
hi $#&
kl @
n]_o[
Space
PQRS p
TUV t
WX Y Z wqrs ( )
uv { }-
xyz
`
|! ?\
   .
,

:
;
1234567890
OK
Delete
Set
 
e, 
r, 
w, 
q to select characters, 
then 
Repeat this step to enter other characters. –
  when you’ve fi nished 
 entering text.
 Tips
Using the numbered buttons to enter characters
e.g.: entering the letter “R”
1. Press [7] to move to the 7th row.
2. Press [7] twice to highlight “R”.
3. Press [OK].
To enter a space
Press [  DELETE] then press [OK].
To delete a character
Press [
h PAUSE] on a character in the name field.
To cancel in the middle
Press [RETURN].
Characters will not be saved.
 Notes
Long recording names may not be displayed.
Entering Text
By using the FUNCTIONS window you may access the 
main functions quickly and easily.
With the unit stopped
 
 
e, 
r to select a menu item, 
then 
If you select “Other Functions”, press 
[
e, 
r] to select a menu item and press 
[OK]. –
DVD-RAMFUNCTIONS  Cartridge Protection Off
Disc Protection Off
Other Functions
Programdelete
Playback
OK
DVD-RAMFUNCTIONS  Cartridge Protection Off
Disc Protection Off
Other Functions
Programdelete
PlaybackPlaylists
Flexible Recording
DV Camcorder Rec.
Setup
DVD Management
OK
q 26
You can select and play recorded programs.Playback
q 18
You can make scheduled recording settings.Program
q 19
You can delete recordings using DELETE Navigator.Delete
q 41
You can copy still pictures.Copy New Pictures
q 32
You can play playlists.Playlists
q 22
The unit sets the best possible picture quality that 
  fits the recording within the remaining disc space.Flexible Recording
q 25
DV automatic recording functionDV Camcorder Rec.
q 46
You can change the unit’s settings using Setup 
menu.Setup
q 43
You can manage discs through formatting, finalizing 
and other operations.DVD and Card Management
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							34
RQT9046
Linked Operations with the TV (VIERA Link™ “HDAVI Control™”)
You can enjoy linked operations with the TV and receiver by using “HDAVI Control”.
What is VIERA Link “HDAVI Control”?
VIERA Link™ is a new name for EZ Sync™.
VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic 
TV (VIERA) or receiver under “HDAVI Control”. You can use this function by connecting the equipment with the 
HDMI cable. See the operating instructions for connected equipment for operational details.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard 
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and 
added.  As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be 
guaranteed.
This unit supports “HDAVI Control 3” function. 
“HDAVI Control 3” is the newest standard (current as of December, 2007) for Panasonic’s HDAVI Control 
compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment 
supporting VIERA Link function.
Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. •
•
•
Preparation
1. Connect this unit to your TV or receiver with an HDMI cable (➔ 11, 61).
2. Set “VIERA Link” to “On” (➔ 55). (The default setting is “On”.)
3. Set the “HDAVI Control”  operations on the connected equipment (e.g., TV).
• When using HDMI2 terminal of VIERA as “HDAVI Control” , set the input channel to HDMI2 on VIERA.
4. Turn on all “HDAVI Control”  compatible equipment and select this unit’s input channel on the connected TV so 
that the “HDAVI Control” function works properly.
 When the connection or settings are changed, repeat this procedure.
(When the TV is on) 
Automatic input 
switchingWhen the TV is on and the following operations are performed, the TV’s input will 
automatically switch to HDMI input mode and the TV displays the corresponding 
action.
(Picture or sound may not be available for the first few seconds.)
Press [FUNCTIONS]*
1, [
q PLAY]*2, [DIRECT NAVIGATOR], [SCHEDULE] etc.
(When the TV is off)
Power on linkWhen the TV is off and the following operations are performed, the TV will 
automatically turn on and display the corresponding action.
(Picture or sound may not be available for the first few seconds.)
Press [
q PLAY]*
2, [DIRECT NAVIGATOR], [SCHEDULE] etc.
DVD-V *3 etc.The TV is automatically turned on when you insert the discs.•
Power off link 
When you turn the TV off, this unit is also automatically turned off. This unit 
automatically turns off even if the FUNCTIONS screen, the status message or the 
on-screen menu is displayed, during playback.
Even if the TV is turned off, this unit will not turn off at the same time under the 
following conditions:
when you press [
* REC] and this unit is recording, 
when scheduled recording is proceeding
when copying still pictures
when finalizing, etc.
When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, 
the receiver will also turn off. –
–
–
–
•
*
1 This button is available only when this unit is on.
*2 When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents 
from where playback started.
  In this case, press [
u] or [
t] to go back to where playback started.
*
3 Depending on discs, the TV may not automatically turn on.
 Notes
When this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 3 and initially set up, it automatically acquires the TV 
setting information.
These functions may not work normally depending on the equipment condition.
About “HDAVI Control” function, read the operating instructions of the connected equipment (e.g., TV) too. •
•
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							35
RQT9046
Advanced Features
Easy Control only with VIERA Remote Control
If you connect this unit via HDMI cable to a TV with “HDAVI Control 2 or 3” function, you can operate both units more 
conveniently.
You can operate this unit using the following buttons on the TV remote control.
[
e, 
r, 
w, 
q], [OK], [RETURN], [SUB MENU].
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
Using the FUNCTIONS 
window to operate 
this unitRefer to TV operating instruction for operating the TV.
 Display this unit’s “FUNCTIONS” window using the TV 
remote control.
      
If this unit is set to off, it will automatically turn on. •
 Select the item you want to
operate with the TV remote
control, then 
Using the SUB 
MENU window to 
operate this unit
By using the TV remote control, you can play discs using the “Control Panel” 
(➔ below) and select the drive (DVD, SD or USB).
Control PanelControl Panel is displayed 
(➔ below).
FUNCTIONSFUNCTIONS window is displayed 
(➔ above).
Top Menu DVD-V Top menu is displayed (➔ 26).
Menu DVD-V Menu is displayed (➔ 26).
Drive SelectSelect the DVD, SD or USB drive.
Set FavoriteFavorite list is displayed (➔ 15).
Rotate Right  (JPEG)Rotate the still picture (➔ 31).
Rotate Left  (JPEG)
Zoom In
Enlarge or shrink the video or the 
still picture (➔ 26, 31).
Zoom out 
 
 e.g.,
 
FUNCTIONS
Set Favorite
Drive Select
Zoom In Control PanelOK
 Select an item, 
then 
Using the Control 
Panel
Using the Control Panel, you can operate search backward, search forward, stop, 
etc. with the TV remote control.
Perform steps 1 and 2 of “Using the SUB MENU window to operate this unit”.
The Control Panel is displayed (➔ right)
While playing a recording or DVD-Video, etc.
[
e]: Pause, [
r]: Stop, [
w]: Search backward, [
q]: Search forward, 
[OK]: Play, [EXIT]: Exit the screen.
While playing still pictures
[
r]:Stop, [
w]: View previous picture, [
q]: View next picture, 
[EXIT]:Exit the screen. –
–
 Notes
When you record a program by operating the TV (Direct TV Recording, etc.)
It is recorded on a disc in the recording mode preset on this unit.
If the Direct TV Recording mode has been activated on this unit, then a new program cannot be recorded using this mode.
g When you want to leave the TV on and turn off only this unit
Press [
^ DVD POWER] on this unit’s remote control to turn off.
g When not using “HDAVI Control”
Set “VIERA Link” in the Setup menu to “Off ” (➔ 55).
•
•
About the FUNCTIONS window (➔ 33)
PlaybackProgramDelete
Other Functions
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
OK
About the FUNCTIONS window (➔ 33)
PlaybackProgramDelete
Other Functions
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
OK
Pause
StopPlay
Exit Search SearchControl PanelPause
StopPlay
Exit Search SearchControl Panel
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							36
RQT9046
Recordings-Editing
 Tips
Recording/Chapter
Normally, programs are recorded as a single item consisting of one 
chapter.
Recording
Chapter
Start End
RAM You can divide a recording into multiple chapters.
Chapter Chapter Chapter ChapterRecording
After finalizing, recordings are divided into chapters of the following 
lengths.
-R -R DL -RW(V) : Chapters are approx. 5 minutes long.
+R +R DL : Chapters are approx. 8 minutes long.
Maximum numbers of items on a disc
RAM -R -R DL -RW(V)+R +R DL +RWRecordings 99 49
Chapters Approx. 1000 Approx. 254
Accessing the Recording View
  to select the DVD drive.
 
RAM When the Album View screen
            is displayed, press 
 to switch to the
            Recordings screen.
 
e, 
r, 
w, 
q to select a recording.
Multiple editing (➔ right, Tips) –
  to display the menu list.
To view more options 
Press [
e, 
r] to select “Edit Recording”, then 
press [OK].
Items that cannot be selected are gray.
e.g., 
RAM
Setup Protection
Cancel Protection
Change Thumbnail
Divide Recording
Edit Name
Properties
Edit Recording
View Chapters
Album View
Delete Recording
If you select “View Chapters” (➔ 38) •
Refer to 
“Editing 
Operations to 
Recordings” 
(➔ right).
•
•
 Notes
You cannot edit during recording.
+R +R DL Management information is recorded in unused sections 
when you edit discs. The available space on these discs decreases 
each time you edit their contents.
 Tips
To exit the menu screen
Press [DIRECT NAVIGATOR].
To view other pages
Press [
e, 
r, 
w, 
q] to select “Previous” or “Next”, then press [OK].
You can also press [
u, 
i] to view other pages.
Multiple editing
Select with [
e, 
r, 
w, 
q], then press [
h PAUSE]. (Repeat.)
A checkmark appears. Press [
h PAUSE] again to cancel.
Editing Operations to Recordings
Delete Recording
Perform steps 1−4 of “Accessing the Recording View” 
(➔ left).
RAM -R -R DL -RW(V) +R +R DL +RW
Important: Once deleted, contents cannot be 
recovered.
 e, 
r to select “Delete Recording”, 
then 
 
w to select “Delete”, then  
Recording Properties
Perform steps 1−4 of “Accessing the Recording View” 
(➔ left).
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
 
e, 
r to select “Properties”, then 
Recording information is shown (e.g., date, time).
Properties 
No. 
Channel Date 01 
4 1/ 1/2008 TueStart 
Rec. Time 1:02 PM
1:00 (SP)
Football
OK
–
Recording Name
Perform steps 1−4 of “Accessing the Recording View” 
(➔ left).
RAM -R -R DL -RW(V) +R +R DL +RW
 
e, 
r  to select “Edit Name”, then
 
You can give a name for the recording (➔ 33). –
•
•
–
–
Using menus to play 
still pictures (➔ 30).
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							37
RQT9046
Advanced Editing
Setup Protection/Cancel Protection
Perform steps 1−4 of “Accessing the Recording View” 
(➔ 36).
RAM
Use to prevent accidental erasure of recordings.
 
e, 
r to select “Setup Protection” 
or “Cancel Protection”, then 
 
w to select “Yes”, then 
The lock symbol 
appears when the 
recording is protected.DIRECT NAVIGATOR    Recordings
     DVD-RAM
10 10/27 Mon
07
8 10/27 Mon
08
Change Thumbnail
Perform steps 1−4 of “Accessing the Recording View” 
(➔ 36).
RAM -R -R DL -RW(V) +R +R DL +RWChanges the thumbnail picture shown in the 
Recordings screen.
 e, r
 to select 
“Change Thumbnail”, then 
SSUB MENUSelectNo.--09
DIRECT NAVIGATOR   Change Thumbnail
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
NextENTER
07
***06 1.  1.  SUN
08
------
--EndNext
VideoPictureBA
***06Change
Change
Start play and select
the thumbnail position.
--:--.--
Exit0:00.00
08
  to start play.
  at the point you want to 
use as the thumbnail.
To change the thumbnail:
Restart play and press [
e, 
r] to select 
“Change” then press [OK] at the point you 
want to use as the thumbnail. –
8 
e, 
r to select “Exit”, then 
 Tips
For quicker editing
Use search (➔ 26), Slow-motion Play or Time Slip (➔ 27) to find the 
desired point.
To skip to the start or end of a recording, press [
u] (start) or [
i] 
(end).
For better precision, use Slow-motion Play and Frame-by-Frame 
Viewing (➔ 27). •
•
•
Divide Recording
Perform steps 1−4 of “Accessing the Recording View” 
(➔ 36).
RAM
Once divided, recordings cannot be recombined.
 
e, 
r to select “Divide Recording”, 
then 
SSUB MENUSelectNo.--09
DIRECT NAVIGATOR    Divide Recording
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
NextENTER
07
***06 1.  1.  SUN
08
------
--
Next
VideoPictureBA
***06Preview
Divide
--:--.--
Exit0:00.11
Divide
Play 08
SSUB MENUSelectNo.--09
DIRECT NAVIGATOR    Divide Recording
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
NextENTER
07
***06 1.  1.  SUN
08
------
--
Next
VideoPictureBA
***06Preview
Divide
--:--.--
Exit0:00.11
Divide
Play 08
  at the point you want to 
 divide.
For quicker editing (➔ left, 
Tips)
Selecting “Preview” then pressing [OK] plays 
the recording from 10 seconds prior, to 10 
seconds after the division point.
To change the point to divide at: 
Restart play and press [
e,
r] to select 
“Divide” then press [OK] to bring to the point 
where you want to divide. –
–
–
 
e, 
r to select “Exit”, then 
8 
w to select “Divide”, then 
The recording is divided at that point. –
 Notes
Divided recordings retain the name of the original.
A short amount of video and audio just before and after the division 
point gets cut out.
You cannot divide a recording when the resulting parts are too short 
or when the total number of recordings exceeds 99. •
•
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							38
RQT9046
Accessing the Chapter View
RAM
Allows viewing and editing chapters individually.
  to select the DVD drive.
 
RAM When the Album View screen
            is displayed, press 
 to switch to the
            Recordings screen.
 
e, 
r, 
w, 
q to select a recording.
  to display the menu list.
Properties
Edit Recording
Album View
View Chapters
Delete Recording
 
e, 
r to select “View Chapters”, 
then 
 
e, 
r, 
w, 
q to select a chapter.
Multiple editing (➔ below, Tips) –
7a To play, 
7b To edit,  to display the menu list. 
Refer to “Chapter Operations” 
(➔ right).
You can go back to the Recordings screen.Create Chapter
Combine Chapters
View RecordingsDelete Chapter
 Tips
To exit the menu screen
Press [DIRECT NAVIGATOR].
To view other pages
Press [
e, 
r, 
w, 
q] to select “Previous” or “Next”, then press [OK].
You can also press [
u, 
i] to view other pages.
Multiple editing
Select with [
e, 
r, 
w, 
q], then press [
h PAUSE]. (Repeat.)
A checkmark appears. Press [
h PAUSE] again to cancel. –
–
Chapter Operations
Create Chapter
Perform steps 1−7b of “Accessing the Chapter View” (➔ left).
8 
e, 
r to select “Create Chapter”, 
then 
DIRECT NAVIGATOR   Create Chapter
     DVD-RAM
Page      02/02 Previous
***06 1.  1.  SUN
Next
07
***06 1.  1.  SUN
08
------
--EndNext***06PlayCreate
Exit0:43.21
08VideoPictureBA
9  at the point you want to 
 divide.
10 
e, 
r to select “Exit”, then 
 Notes
A short portion of the recording just after the creation point may be lost.
 Tips
For quicker editing (➔ 37, Tips)
Delete Chapter
Important:  Once deleted, recorded contents cannot be 
recovered.
Perform steps 1−7b of “Accessing the Chapter View” (➔ left).
8 
e, 
r to select “Delete Chapter”, 
then 
9 
w to select “Delete”, then
 
Combine Chapters
Perform steps 1−7b of “Accessing the Chapter View” (➔ left).
8 
e, 
r to select “Combine 
Chapters”, then 
9 
w to select “Combine”, then 
The selected chapter gets combined with the 
next chapter. –
Chapters-Creating, Editing
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							39
RQT9046
Advanced EditingAdvanced Editing
Still Pictures-Editing
Accessing the Album/Picture View
RAM SD USB
  to select the drive 
  (DVD, SD or USB).
 
RAM When the Recordings screen 
is displayed, press 
 to switch to the 
Album View screen.
USB When the DivX or MP3 Menu 
is displayed, perform steps 1–4 in “To 
select file type” on the upper Tips on 
page 28 selecting “Pictures” in step 4 to 
change the playback mode.
3a
Editing an album:
 
e, 
r, 
w, 
q to select the album.
 
– Multiple editing (➔ right, Tips)
Editing a still picture:
3b1. 
e, 
r, 
w, 
q to select the 
album which contains the still 
picture to edit, then 
2. 
e, 
r, 
w, 
q to select the still 
picture.
– Multiple editing (➔ right, Tips)
 to display the menu list.
To view more options
  Press [
e, 
r] to select “Edit Album”, then 
press [OK].
Items that cannot be selected are gray.
e.g., 
SD Editing an album •
Slideshow w/SNDTRKSNDTRK FolderStart Slideshow
Slideshow settings
Add Picture
Create Album
Edit Album
Copy to DVD
Album Name
Delete Album
Set Protection
Cancel Protection
Refer to “Slideshow” and 
“Slideshow with soundtrack” 
(➔ 30).
Refer to 
“Album/Picture 
Operations” 
(➔ right).
e.g., 
SD Editing a still picture
Delete Picture
Set Protection
Cancel Protection
Album ViewRefer to “Album/Picture 
Operations” (➔ right).
You can go back to the Album View screen.
Refer to “Copying Still Pictures via 
the Album View Screen” (➔ 41).
 Tips
To view other pagesPress [
e, 
r, 
w, 
q] to select “Previous” or “Next”, then press [OK].– You can also press [
u, 
i] to view other pages.
Multiple editing
Select with [
e, 
r, 
w, 
q], then press [
h PAUSE]. (Repeat.)
– A checkmark appears. Press [
h PAUSE] again to cancel.
To exit the menu screen
Press [DIRECT NAVIGATOR].
To return to the previous screen
Press [RETURN].
Album/Picture Operations
Add Picture/Create Album
Perform steps 1−4 of “Accessing the Album/Picture 
View” (➔ left).
e, 
r to select “Add Picture” or 
“Create Album”, then 
w to select “Yes”, then 
e, 
r, 
w, 
q to select the album 
containing picture to add, then 
8e, 
r to select “Select pictures to 
copy” or “Copy all pictures”, then 
If “Select pictures to copy” is selected:
  Press [
e, 
r, 
w, 
q] to select the picture, 
then press [OK].
If “Copy all pictures” is selected:
All the still pictures in the album will be copied.
•
•
q to select “No” to fi nish copying, 
then 
–  If you want to continue copying, select “Yes” 
and repeat steps 7–8.
9
Continued on next page.
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							40
RQT9046
10w, 
q to select “Yes” or “No”, then 
If “Yes” is selected:
You can give a name for the album (➔ 33).
If “No” is selected:
The recording date of the first picture in the 
album becomes the album name.  •
• Only when you select “Create Album”
Delete Album/Delete Picture
Important: Once deleted, contents cannot be recovered.
When deleting an album, non-picture files in the 
album will also be deleted. (This does not apply to 
subordinate folders in the album.)
Perform steps 1−4 of “Accessing the Album/Picture 
View” (➔ 39).
e, 
r to select “Delete Album” or 
“Delete Picture”, then 
w to select “Delete”, then  
Set Protection/Cancel Protection
Set protection to prevent pictures from being 
accidentally deleted.
Perform steps 1−4 of “Accessing the Album/Picture 
View” (➔ 39).
e, 
r to select “Set Protection” or 
“Cancel Protection”, then 
 
w to select “Yes”, then  
–  The lock symbol “” appears when the still 
picture is protected. 
 Notes
Even if you set protection using this unit, album may be deleted by 
other equipment.
Album Name
Perform steps 1−4 of “Accessing the Album/Picture 
View” (➔ 39).
e, 
r to select “Album Name”, 
then 
–  You can give a name for the album (➔ 33).
 Notes
Album names entered using this unit may not display on other 
equipment.
•
Delete Navigator
RAM SD USB
Important:  Once deleted, contents cannot be recovered.
  to select the drive 
(DVD, SD or USB).
  With the unit stopped
 
PlaybackProgramDelete
Other Functions
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
OK
e, 
r to select “Delete”, then 
RAM When the Recordings screen is displayed, 
press 
 to switch to the Album View screen.
DELETE Navigator 
     DVD-RAMAlbum View
Page      02/02 Previous
2/26/2007 Total  1
NextOK
007
2/26/2007 Total  2
102-DVD 101-DVD
008
------
--
SSUB MENU Select
VideoPictureBA
Press OK to go to
Picture View
Deleting an album:
 
e, 
r, 
w, 
q to select the album, 
then 
Deleting a still picture:
4b1. 
e, 
r, 
w, 
q to select the 
album, then 
2. 
e, 
r, 
w, 
q to select the still 
picture, then 
4a
w to select “Delete”, then  
 Notes
You cannot delete while recording.
 Tips
To return to the previous screen
Press [RETURN].
To view other pages
Press [
e, 
r, 
w, 
q] to select “Previous” or “Next”, then press [OK].
– You can also press [
u, 
i] to view other pages.
Multiple editing
Select with [
e, 
r, 
w, 
q], then press [
h PAUSE]. (Repeat.)
– A checkmark appears. Press [
h PAUSE] again to cancel.
Deleting an item increases the available space by the amount of 
space taken by the item deleted. •
Deleting Still Pictures Still Pictures-Editing
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC