Panasonic Dmr Ez28 Operating Instructions Manual

							11
Getting Started
RQT9046
You can enjoy high-quality picture and audio by changing the audio/video (AV) cable connection between this unit 
and your TV on pages 8 to 10 as follows.
Connecting to a TV with an HDMI (High Definition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, 
enabling you to enjoy high quality digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video. 
Regarding “HDAVI Control” function
When connecting with a Panasonic TV (VIERA) or a receiver equipped with “HDAVI Control” function, linked 
operations are possible. [➔ 34, Linked Operations with the TV (VIERA Link™ “HDAVI Control™”)]
Please use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the cover). It is 
recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20 
(2.0 m/6.6 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.
Non-HDMI-compliant cables cannot be used. •
•
Rear of  TV
HDMI IN
Rear of this unit
HDMI cable(not included)
Set “HDMI Priority” and “HDMI Audio Output” to “On” (➔ 54, 55). (The default setting is “On”.)
 Notes
If connecting to equipment that is only compatible with 2 channels output, audio with 3 channels or more will be 
down-mixed (➔ 77) and output as 2 channels (some discs cannot be down-mixed). 
For display units compatible with HDCP (High bandwidth Digital Content Protection) that are equipped with a 
digital DVI input terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching 
cable (audio cannot be output). •
•
•
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							12
RQT9046
Setting the Channels and Clock
Preparation:
Turn on the television and select the appropriate video input 
to suit the connections to this unit (Example: AV input).
These are the first settings you make upon buying the 
unit. You don’t need to make these settings again. •
•
  to turn the unit on.
“HELLO” appears on the unit’s display.
When this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI Control 3 via an HDMI cable (➔ 11), 
it acquires the setting information from the TV. When the 
Quick Start Setting screen appears (➔ 14, step 1)  –
•
 Language:
e, 
r to select, then 
When the Quick Start Setting screen 
appears after this step (➔ 14, step 1) •
English
Español
Français
Press OK
Pulse OK
Appuyer sur OK Select Language
Seleccione el idioma
Sélection de langue
  TV Aspect Ratio:
e, 
r to select “4:3 TV” or 
“16:9 Widescreen TV”, then Aspect Ratio SelectionSelect TV type and press OK.
(Please refer to Operation Instruction 
for details)
4:3 TV16:9 Widescreen TV16:94:3
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”. •
•
  Quick Start Function:
e, 
r to select “On” or “Off ”, 
then Quick Start SettingThe unit can be turned on faster, in about
1 second. Please note that Quick Start 
mode slightly increases power 
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
OnOff
  Automatic Clock and Channel 
Settings:
e, 
r to select “Yes” or “No”, 
 then 
When connecting the cable from the wall 
(cable TV or antenna) to the unit’s RF IN:
Select “Yes”.
The unit then displays the source selection 
screen (➔ 13).
When not connecting the cable from the wall 
(cable TV or antenna) to the unit’s RF IN:
Select “No”.
The unit then displays “Set Clock Manually” 
screen (➔ 13, Manual Clock Setting). •
•
Automatic Clock and Channel SettingsDoes this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the 
unit’s RF IN.
Ye sNo
8
 Tips
“Quick Start” function (➔ 49)
If you set Quick Start to on, you can start 
recording to DVD-RAM about 1 second 
after you press [
^ DVD POWER] to turn 
the unit on and then sequentially press 
[
* REC].
The following happens when you have 
selected “On”.
Power consumption in standby mode 
increases because power is supplied to 
the unit.
To return to the previous screen
Press [RETURN]. •
–
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							13
Getting Started
RQT9046
  The types of transmission: 
e, 
r to select “Antenna” or 
“Cable”, then 
Automatic Clock and Channel SettingsPlease select the wire connected to RF IN.
Antenna
OK
Cable
  to start automatic channel/ 
 clock setting.
8  Confirm the time, then 
DST (Daylight Saving Time) shows the 
summertime setting.
Time Zone shows the time difference from 
Greenwich Mean Time (GMT).
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007   11:15 AMDST-----------          OnTime Zone----EST
OK
See “Notes”
(➔ right) –
–
 Tips
 If the unit displays “No channels were found.”, turn off the unit 
and confirm the cable or antenna input is connected to the RF IN 
terminal. Restart the set up again (➔ below).
If “Auto Clock Setting is incomplete.” is displayed, press [OK] 
and set the clock manually (➔ right).
If the clock is not correct, set the clock with “Adjust Time Zone” 
(➔ 49) or “Set Clock Manually” (➔ 49).
You can delete channels you don’t need after completing Auto 
Channel Setting (➔ 46).
Restarting the Auto-Setup
(after relocation, for example)
1. When the unit is on and stopped, press and hold [CH 
2] and 
[CH 
1] on the main unit at the same time for about 5 seconds.
  The unit turns off.
2. Press [
^ DVD POWER] to turn the unit on.
(The signal source and channel captions revert to their default 
values. All scheduled recordings are cleared.)
To cancel in the middle
Press [RETURN].
 Notes
Conditions of the received channel may cause automatic channel/
clock setting to take extra time. •
•
•
•
Manual Clock Setting
Perform steps 1–5 on page 12.
 
w, 
q to select the item you want 
to change.
Set Clock Manually
/:
/
SAT AM
DSTEST
11200012
OffTime ZoneEST
00Month Day Year
Hour Minute
 
e, 
r to change the setting.
Repeat steps 6-7 to change other items. –
8  to confirm new date and 
 
time.
The clock starts. –
 Notes
The automatic clock setting can take a few minutes.
Time Zone
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time) = GMT –6
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time) = GMT –8
AST (Alaska Standard Time) = GMT –9
HST (Hawaii Standard Time) = GMT –10
For other areas: xx hr
DST (Daylight Saving Time)
If you select “On”, the clock is advanced one hour beginning at 2 
a.m. on the second Sunday in March and ending at 2 a.m. on the 
first Sunday in November.
Set the DST period manually when it varies according to regions 
(➔ below).
To set the DST period manually
1. Press [SETUP].
2. Press [
e, 
r] to select “Setup” then press [
q].
3. Press [
e, 
r] to select “Clock Settings” then press [OK].
4. Press [
e, 
r] to select “Set the time change dates for DST” then 
 press [OK].
5.  Press [
e, 
r, 
w, 
q] to set the “Month”, “Day”, “Hour”, and “Minute” 
then press [OK].
 Reinitializes the 
settings.
Setup
Channel
Setup
Disc
Video
Audio
Display
TV ScreenSet the time change dates for DST
OK
:
AM3SUN2nd200Month Beginning
Day
Hour Minute
:
AM11SUN1st200
Restore Default
Month End
Day
Hour Minute
•
•
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							14
RQT9046
Acquiring the setting information from the TV (VIERA)
If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI 
Control 3 via an HDMI cable, then the setting information on the TV is 
acquired by this unit when the unit is turned on for the first time. Please 
proceed to the following steps.
The following screen is displayed in the language set on the VIERA.
–  The language setting screen may be displayed depending on the usage 
environment. Press [
e, 
r] to select language, then press [OK].
  Quick Start Function:
 
e, 
r to select “On” or “Off ”,
then The unit can be turned on faster, in about
1 second. Please note that Quick Start 
mode slightly increases power 
consumption when the unit is off.
(See Operation Instructions for details) 
Turn Quick Start on ?
OnOff
Quick Start Setting
 Channel information acquisition:
e, 
r to select “Set Channels 
via VIERA Link”, then 
Acquires the following information from the TV (VIERA).
The types of transmission
Channel Map
Closed caption
When the settings are complete, the time confirmation screen is 
displayed. •
–
–
–
Automatic Clock and Channel Settings
Set No Channels with this unitSet Channels without VIERA Link Please select how to set channels. It is possible to
download the channel information from your TV via
VIERA Link. In case you do not need channels, please
select “Set No Channels with this unit”.Set Channels via VIERA Link
OK
 Confirm the time, then 
For details of the time information (➔ 13, Tips, Notes)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007   11:15 AMDST-----------          OnTime Zone----EST
OK
–
 Tips
If you do not want to acquire the 
setting information from the VIERA
Press [
e, 
r] to select “Set Channels 
without VIERA Link” or “Set No 
Channels with this unit”, then press 
[OK] in step 2.
When connecting the cable from the 
wall (cable TV or antenna) to the unit’s
RF IN:
Select “Set Channels without VIERA 
Link”.
The unit then displays the source 
selection screen (➔ 13, left column, 
step 6).
When not connecting the cable from 
the wall (cable TV or antenna) to the 
unit’s RF IN:
Select “Set No Channels with this 
unit”.
The unit then displays “Set Clock 
Manually” screen (➔ 13, Manual 
Clock Setting).
If “Automatic Clock and Channel 
Settings” screen is displayed, the 
channel information could not be 
acquired from the TV (VIERA). Please go 
to step 5 on page 12. 
To return to the previous screen 
Press [RETURN].
 Notes
Acquisition of the setting information 
is not supported by all Panasonic TVs 
(VIERA).
The acquisition may take some time 
depending on the VIERA setting 
information. •
–
–
•
•
•
Setting the Channels and Clock
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							15
RQT9046
Getting Started
Watching Television
This DVD recorder has a tuner which allows it to directly receive and record 
analog and terrestrial digital channels. High Definition (HD) programming is 
“down-converted” and recorded in Standard Definition (SD).
Preparation:
Turn on the television and select the appropriate video input to suit the 
connections to this unit (Example: AV input).
  to turn the unit on.
“HELLO” appears on the unit’s display. –
  to select desired channel.
You can also select channels with the numbered buttons.To directly enter channels for analog and digital broadcasts:
Antenna Mode:  Cable TV Mode:
e.g., “3”:
[0] ➔ [3] ➔ [OK]e.g., “5”:
[0] ➔ [0] ➔ [5] ➔ [OK]
“13”:
[1] ➔ [3] ➔ [OK]“15”:
[0] ➔ [1] ➔ [5] ➔ [OK]
To enter the sub channel number for a digital broadcast:
Antenna Mode:  Cable TV Mode:
e.g., “3-1”:
[3] ➔ [-] ➔ [1] ➔ [OK]e.g., “1-1”:
[1] ➔ [-] ➔ [1] ➔ [OK]
“13-1”:
[1] ➔ [3] ➔ [1] ➔ [OK]“15-1”:
[1] ➔ [5] ➔ [-] ➔ [1] ➔ [OK]
The hyphen appears automatically on “Antenna Mode” if you enter two numbers. •
•
To set Favorite Channels
You can define a Favorite list containing your favorite channels only. (Up to 30 channels)
1. After selecting the desired channel to set
  Press [SUB MENU].
2. Press [
e, 
r] to select “Set Favorite”, then press [OK].
3. Press [
e, 
r] to select the position on the list, then press [OK].
 −Press [
w, 
q] to change between pages.
 −You can also select a list number (1-9 and 0) with the numbered buttons.
 To delete the favorite channels registered
 Press [
e, 
r] to select the channel on the list, then press [OK].
To select a channel from the Favorite list
1. Press [FAVORITE].
2. Press [
e, 
r] to select a channel, then press [OK].
 −Press [
w, 
q] to change between pages.
 −You can also select a channel with the numbered buttons.
 Notes
It is possible to select a channel from the Favorite list for instant or scheduled 
recording (➔ 17, 18).
If you set “Surf Mode” to “Favorite” (➔ 47), then only the Favorite channels can be 
selected using [CH 
1, 
2].
You can register channels in the Favorite list from Channel Setting list (➔ 46, Setting 
favorite channels). •
•
•
 Notes
This unit can receive most Basic 
Cable television channels. It can not 
receive Premium Services that require 
additional fees or a separate decoder.
This unit can receive music channels 
from digital broadcasters, but you 
cannot record them. Data broadcasts 
are not for viewing or recording.
Multi-channel surround broadcast is 
output in stereo (on 2 channels).
 Tips
To zoom in on video
1. Press [SUB MENU].
2. Press [
e, 
r] to select “Zoom In”, then 
press [OK]. •
•
•
Basic Operations
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							16
RQT9046
Preparation:
Turn on the television and select the appropriate video input to suit the 
connections to this unit (Example: AV input).
Playing Discs
Refer to “Advanced Playback” (➔26, 27) for detailed information on playback. 
RAM -R -R DL -RW(V) +R +R DL +RW DVD-V -RW(VR) CD
  to turn the unit on.
“HELLO” appears on the unit’s display. –
 ;OPEN/CLOSE  to open the tray (Button located on the upper front of the unit).
Insert a disc. –
 The tray closes and play begins. –
Stopping Play
Press [
g STOP].
The stopped position is 
memorized. (Resume play 
function)
The stopped position is cleared 
when you press [
g STOP] two or 
more times, or press 
[
; OPEN/CLOSE]. –
–
Pausing Play
Press [
h PAUSE].
Press again to restart play. –
 Tips
Icons such as “ RAM ” indicate usable discs. Refer to pages 62 and 63.
 Notes
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)Playback starts from the most recent recording.
DVD-V CDPlayback starts from the beginning of the disc.
DivX
DivX Menu screen appears (➔ 29).
The unit takes some time to read the disc before play starts.
Discs continue to rotate while menus are displayed. Press [
g STOP] when you finish to 
preserve the unit’s motor and your television screen. •
•
•
•
•
Playback
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							17
RQT9046
Basic OperationsBasic Operations
Recording Television  Programs
Refer to “Important Notes for Recording” (➔ 20) and “Advanced Recording” (➔ 21 to 23) for detailed information on 
recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the television and select the appropriate video input to suit the 
connections to this unit (Example: AV input).
RAM If the disc is protected, release protection (➔ 44). •
•
  to turn the unit on.
“HELLO” appears on the unit’s display. –
 ;OPEN/CLOSE  to open the tray (Button located on the upper front of the unit).
Insert a disc with enough remaining blank space and press 
[
; OPEN/CLOSE] again to close the tray. –
  to select desired channel.
Antenna Mode:
e.g. channel 4-2Cable TV  Mode:
e.g. channel 102-45
To select with the numbered buttons (➔ 15).
When no channel setting is performed on the unit and broadcast is 
recorded directly from the cable box or satellite receiver, select a 
channel on the connected equipment and press [INPUT SELECT] 
to select “IN1” or “IN2”. –
–
  to select the recording mode.
Recording mode should be determined by program length and 
available time on the disc (➔ 21).
Recording mode
Remaining time –
  to start recording.
REC
Pausing Recording
Press [
h PAUSE].
Press again to restart recording. –
Stopping Recording
Press [
g STOP].
 Tips
Icons such as “ RAM ” indicate usable 
discs. Refer to pages 62 and 63.
 Notes
-R -R DL -RW(V) +R +R DL +RW 
It takes about 30 seconds for the unit 
to complete recording management 
information after recording finishes.
You cannot change the channel or 
recording mode during recording. •
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							18
RQT9046
Scheduled Recording
Refer to “Advanced Scheduled Recording” (➔ 23, 24) for detailed information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW 
Preparation: 
Turn on the television and select the appropriate video input to suit the 
connections to this unit (Example: AV input).
RAM If the disc is protected, release protection (➔ 44).
Insert a disc with enough remaining blank space.
Confirm that the clock on the unit’s display is set to the correct time.
If connected via a cable box or satellite receiver, set channel on that 
equipment before scheduled recording starts. •
•
•
•
•
 
CANCELSSUB MENUTimer OffA
Schedule List Remaining Recording Time3/26 Tue 12:53 PM1:58 SP DVDChannel No
Press OK to set new schedule.
DateOnNew Scheduled RecordingOffMode Check
OK
 
e, 
r to select “New Scheduled Recording”, then 
 
w, 
q to move through the items and 
e, 
r to set 
the items.
Channel/Input TV Station/External InputTo select a favorite channel
(To set Favorite Channels, see page 15.)
1. Press [SUB MENU].
2. Press [
e, 
r] to select “Change Surf Mode”, then press [OK].
3. Press [
e, 
r] to select “Favorite”, then press [OK].–
Date/Frequency You can set a daily or weekly program.–
On (start time) / Off (end time)
Hold button to change in 30-minute increments. –
Mode  Recording mode, see page 21 –
Name Press [OK], see page 33.–
To delete all items
1. Press [SUB MENU].
2. Press [
e, 
r] to select “Delete”, then press [OK].
Channel, Caption
Preview of selected 
channel
SCHEDULED 
RECORDINGChannel/
InputDate/
Frequency--------On--:-- --Off--:-- --Mode--
OK
Name 
Number--09
4-1
4-1 KPO-SD
Remaining Recording Time3/26 Tue 12:53 PM1:58 SP DVD
Cancel
Set Channel/Input.
SSUB MENU
Surf Mode: All
 − Repeat steps 2−4 to program other recordings.
  when you have finished programming.
“z” lights on the unit’s display.
Scheduled recording can be started only when the unit is turned off.
–
–
 Notes
To prevent recording errors
Set a scheduled recording period slightly 
longer than the actual program (to make 
sure the program is recorded in full).
Be sure to perform step 5 before the 
scheduled recording time. When the 
unit is turned off, “
z” lights on the unit’s 
display to indicate scheduled recording 
standby has been activated.
“
z” flashes when the unit cannot go to 
scheduled recording standby. (e.g., a 
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
When scheduled recordings are set to 
start one immediately after another, the 
unit cannot record the beginning of the 
later program.
If two scheduled recording times overlap 
the recording that started first always 
has priority. The second recording will 
start only after the first recording has 
finished.
If two starting times is the same the 
recording that programmed later always 
has priority. 
Depending on the Daylight Savings Time 
(DST) settings for this unit, scheduled 
recordings may be affected when the 
seasons change. •
•
•
•
•
•
•
 Tips
Icons such as “ RAM ” indicate usable 
discs. Refer to pages 62 and 63.
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							19
RQT9046
Basic OperationsBasic Operations
Important: Once deleted, contents cannot be recovered.
Preparation: 
Turn on the television and select the appropriate video input to suit the 
connections to this unit (Example: AV input).
Insert the disc containing the recording to be deleted.
RAM If the disc is protected, release protection (➔ 44). •
•
•
Delete Navigator
RAM -R -R DL -RW(V) +R +R DL +RW   
  to select the DVD drive.
With the unit stopped
PlaybackProgramDelete
Other Functions
FUNCTIONS
Cartridge Protection   Off
Disc Protection   OffDVD-RAM
OK
 
 
e, 
r to select “Delete”, then 
RAM When the Album View screen is displayed, 
press 
 to switch to the Recordings screen.No.--09
DELETE Navigator 
     DVD-RAMRecordings
Page      02/02 Previous
10 10/27 Mon
NextDelete
07
8 10/27 Mon
08
------
--
SSUB MENU SelectNextPrevious
VideoPictureBA
No.--09
DELETE Navigator 
     DVD-RAMRecordings
Page      02/02 Previous
10 10/27 Mon
NextDelete
07
8 10/27 Mon
08
------
--
SSUB MENU SelectNextPrevious
VideoPictureBA
 
e, 
r, 
w, 
q to select the recording, then 
 
w to select “Delete”, then 
 Tips
To return to the previous screen
Press [RETURN].
To view other pages
Press [
e, 
r, 
w, 
q] to select “Previous” or “Next”, then press [OK].
You can also press [
u, 
i] to view other pages.
Multiple editing
Select with [
e, 
r, 
w, 
q], then press [
h PAUSE]. (Repeat.)
A checkmark appears. Press [
h PAUSE] again to cancel.
Delete Recordings During Playback
RAM -R -R DL -RW(V) +R +R DL +RW
 During playback
 
 
w to select “Delete”, then 
•
•
Deleting Recordings
 Notes
You cannot delete while recording.
+R +R DL +RW Even if you have set 
protection on other equipment, such 
recordings are deleted. 
 Tips
Icons such as “ RAM ” indicate usable 
discs. Refer to pages 62 and 63.
RAM Deleting an item increases the 
available disc space, for the amount 
of space taken up by the item being 
deleted.
-R -R DL +R +R DL Available disc space 
does not increase after deletion.
-RW(V) +RW Available disc space 
increases when you delete the last 
recording (the recording space may 
increase slightly when other recordings 
are deleted). •
•
•
•
•
•
%.3&;1@1$
	3251
JOEC


%.3&;1@1$
	3251
JOEC








 
						

							20
RQT9046
Recording of 
multilingual 
broadcastsAnalog broadcasts:
RAM
Both Main and SAP are recorded.You can change the audio during playback (➔ 27, Changing 
Audio during Playback). 
Main SAP
Hello Hola
If you record from external equipment 
(➔ 24)
Select both “Main” and “SAP” on the 
external equipment. •Main
-R -R DL -RW(V) +R +R DL +RW
Select the Main or SAP audio before 
recording.
[➔ 51, Multi-channel TV Sound (Analog)]
The selected audio only is recorded.
HelloIf you record from external 
equipment (➔ 24)
Select “Main” or “SAP” on 
the external equipment. •
Digital broadcasts:Press [AUDIO] to switch audio. (➔ 22)
The selected audio only is recorded.
Recording of 
Widescreen 
broadcastsRAM
Recorded in 16:9 aspect (Widescreen)
-R -R DL -RW(V) +R +R DL +RW
Recorded in 4:3 aspect
If you have a regular 4:3 aspect TV and you receive 16:9 aspect images from a digital broadcast, they will appear in 
the letterbox format (➔ 77, Letterbox). •
Copy-once 
RecordingIt is not possible to record digital broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW, 
+R, +R DL, +RW or 8 cm (3˝ ) DVD-RAM discs. Use the CPRM (➔ 77) compatible DVD-RAM.•
RAM CPRM compatible discs onlyWhen purchasing discs, check that they support CPRM.•
-R -R DL -RW(V) +R +R DL +RW
Ye s
No12 cm (5˝)
Playing the 
disc on other 
DVD players
-R -R DL -RW(V) +R +R DL
The disc must be finalized after recording (➔ 45).All DVD-R, etc. discs recorded on this unit must be finalized before they can be played on other DVD players. Once 
finalized DVD-R, etc. become “read-only” and can no longer be used for recording. DVD-RW can be reused after 
finalizing.
Whether DL discs recorded on this unit can be played on other DVD Players will depend entirely on the capabilities of 
that player. 100 % compatibility is not guaranteed to.
CHG
SEARCHENTEROFFM
E
N
URETURN TOP MENU
DISPL
AYV
OLONA
.S
U
RR
O
U
NDMONI
TOR MOD
E
PICTURE MODER
E
P
EATOPENDC IN 9V
ê /IêCD SEQUENTIALDISCDOUBLE RE-MASTER; º1:/65/9DISC EXCHANGE DISC SKIP