Panasonic Dmr Es35 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmr Es35 Operating Instructions Manual. The Panasonic manuals for DVD Recorder are available online for free. You can easily download all the documents as PDF.
Page 11
11 RQTV0134 Control reference guide (1)Turn the unit on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l16 (2)Select drive (DVD or VHS) . . . . . . . . . . . . . . . . . . . . l above (3)Select channels and title numbers etc./Enter numbers (4)Cancel/Reset the tape counter (5)Basic operations for recording and play (6)Skip the specified time/ . . . . . . . . . . . . . . . . . . . . . . . . . .l31 Jet rewind button (JET REW) . . . . . . . . . . . . . . . . . . . . .l34 (7)Direct...
Page 12
12 RQTV0134 Control reference guide (1)Cassette eject button (
Page 13
13 RQTV0134 STEP 1 Connection This section includes diagrams of two common methods of connection (A-B, pages 13-14). Please connect using the one that best suits you. ≥Visit Panasonic’s homepage for more information about connection methods. (This is in English only.) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp ≥Before doing any connection, turn off all the equipments and read the appropriate operating instructions. ≥Peripheral equipments and optional cables are sold...
Page 14
14 RQTV0134 STEP 1 Connection Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 ≠ coaxial cable to the antenna terminals on the equipment (television etc.). Refer to other equipment’s operating instructions. The unit has DVD/VHS COMMON output terminals and DVD PRIORITY output terminals. v DVD/VHS COMMON OUT ≥For DVD/VHS COMMON output terminals, both DVD and VHS signals can be output. DVD PRIORITY OUT ≥You can also playback a tape with the DVD...
Page 15
15 RQTV0134 S VIDEO OUT terminal The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal. (Actual results depend on the television.) After completing “Connection with a television” (l13) or “Connection with a television and cable box or satellite receiver” (l14), connect S VIDEO cable as illustration below. Usually you can watch a picture from INPUT2 terminal. When you want to playback VHS while recording on DVD, change to INPUT1 terminal.COMPONENT VIDEO OUT terminal These...
Page 16
![Page 16
16
RQTV0134
STEP 2 Plug-in Auto Tuning
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes
in all the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
Preparation
≥Turn on the TV and select the appropriate video input to suit the...](http://img.usermanuals.tech/thumb/58/66419/w300_dmr-es35_en_om_d-15.png "Page 16
16
RQTV0134
STEP 2 Plug-in Auto Tuning
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes
in all the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
Preparation
≥Turn on the TV and select the appropriate video input to suit the...")
16 RQTV0134 STEP 2 Plug-in Auto Tuning After plugging the unit into your household AC outlet and pressing [Í, DVD/VHS POWER] to turn the unit on for the first time, the unit assists you to set the on-screen language, and automatically tunes in all the channels it can receive and sets the clock. The unit automatically determines the type of transmission (airwaves or cable) and puts them into channels as follows. Preparation ≥Turn on the TV and select the appropriate video input to suit the...
Page 17
![Page 17
17
RQTV0134
∫If the clock is an hour slower or faster than the actual
time
Select “j1” or “i1” in “Adjust Time Zone” in the Setup menu (l56).
Signal source, RF output channel, channel caption revert to the
default values when you perform the procedure below.
Scheduled recording settings are also cleared.
When the unit is on and stopped
[1]Press and hold [CH, W] and [CH, X] on the main
unit for about 5 seconds.
The unit turns off.
[2]Press [Í, DVD/VHS POWER] to turn the unit on.
Plug-in Auto Tuning...](http://img.usermanuals.tech/thumb/58/66419/w300_dmr-es35_en_om_d-16.png "Page 17
17
RQTV0134
∫If the clock is an hour slower or faster than the actual
time
Select “j1” or “i1” in “Adjust Time Zone” in the Setup menu (l56).
Signal source, RF output channel, channel caption revert to the
default values when you perform the procedure below.
Scheduled recording settings are also cleared.
When the unit is on and stopped
[1]Press and hold [CH, W] and [CH, X] on the main
unit for about 5 seconds.
The unit turns off.
[2]Press [Í, DVD/VHS POWER] to turn the unit on.
Plug-in Auto Tuning...")
17 RQTV0134 ∫If the clock is an hour slower or faster than the actual time Select “j1” or “i1” in “Adjust Time Zone” in the Setup menu (l56). Signal source, RF output channel, channel caption revert to the default values when you perform the procedure below. Scheduled recording settings are also cleared. When the unit is on and stopped [1]Press and hold [CH, W] and [CH, X] on the main unit for about 5 seconds. The unit turns off. [2]Press [Í, DVD/VHS POWER] to turn the unit on. Plug-in Auto Tuning...
Page 18
![Page 18
18
RQTV0134
Other settings
You can use the preset captions, or manually enter new ones
yourself.
The captions you enter are used as channel names and displayed
on the Direct Navigator screen.
[1]While stopped
Press [FUNCTIONS].
[2]Select “Other
Functions” with [
3, 4]
and press [ENTER].
[3]Select “Setup” with [
3,
4] and press [ENTER].
[4]Select “Channel” with
[
3, 4] and press [2,1].
≥Go to the item you want to set
next.
≥Follow steps 1 to 4 of “Channel captions”.
[5]Select “Preset Channel...](http://img.usermanuals.tech/thumb/58/66419/w300_dmr-es35_en_om_d-17.png "Page 18
18
RQTV0134
Other settings
You can use the preset captions, or manually enter new ones
yourself.
The captions you enter are used as channel names and displayed
on the Direct Navigator screen.
[1]While stopped
Press [FUNCTIONS].
[2]Select “Other
Functions” with [
3, 4]
and press [ENTER].
[3]Select “Setup” with [
3,
4] and press [ENTER].
[4]Select “Channel” with
[
3, 4] and press [2,1].
≥Go to the item you want to set
next.
≥Follow steps 1 to 4 of “Channel captions”.
[5]Select “Preset Channel...")
18 RQTV0134 Other settings You can use the preset captions, or manually enter new ones yourself. The captions you enter are used as channel names and displayed on the Direct Navigator screen. [1]While stopped Press [FUNCTIONS]. [2]Select “Other Functions” with [ 3, 4] and press [ENTER]. [3]Select “Setup” with [ 3, 4] and press [ENTER]. [4]Select “Channel” with [ 3, 4] and press [2,1]. ≥Go to the item you want to set next. ≥Follow steps 1 to 4 of “Channel captions”. [5]Select “Preset Channel...
Page 19
![Page 19
19
RQTV0134
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
Point the remote control at the TV
While pressing [Í, POWER TV], enter the code
using the numeric buttons.
e.g., 0250: press [0] > [2] > [5] > [0].
Manufacturer and Code No.
≥Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥If your TV brand is not...](http://img.usermanuals.tech/thumb/58/66419/w300_dmr-es35_en_om_d-18.png "Page 19
19
RQTV0134
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
Point the remote control at the TV
While pressing [Í, POWER TV], enter the code
using the numeric buttons.
e.g., 0250: press [0] > [2] > [5] > [0].
Manufacturer and Code No.
≥Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥If your TV brand is not...")
19 RQTV0134 To turn the TV on/off, change the TV input mode, select the TV channel and change the TV volume by means of this remote control, set the remote control as follows. Point the remote control at the TV While pressing [Í, POWER TV], enter the code using the numeric buttons. e.g., 0250: press [0] > [2] > [5] > [0]. Manufacturer and Code No. ≥Test by turning on the TV and changing channels. Repeat the procedure until you find the code that allows correct operation. ≥If your TV brand is not...
Page 20
![Page 20
20
RQTV0134
Other settings
“Clock Settings” made here are applied to VHS as well.
[1]While stopped
Press [FUNCTIONS].
[2]Select “Other Functions” with [
3, 4] and press
[ENTER].
[3]Select “Setup” with [
3, 4] and press [ENTER].
[4]Select “Setup” with [
3, 4] and press [2, 1].
[5]Select “Clock Settings” with [
3, 4] and press
[ENTER].
[6]Select “Set Clock Automatically” with [
3, 4]
and press [ENTER].
[7]Press [ENTER].
≥Auto setting starts. This can take some time, up to a few hours
in some cases. The...](http://img.usermanuals.tech/thumb/58/66419/w300_dmr-es35_en_om_d-19.png "Page 20
20
RQTV0134
Other settings
“Clock Settings” made here are applied to VHS as well.
[1]While stopped
Press [FUNCTIONS].
[2]Select “Other Functions” with [
3, 4] and press
[ENTER].
[3]Select “Setup” with [
3, 4] and press [ENTER].
[4]Select “Setup” with [
3, 4] and press [2, 1].
[5]Select “Clock Settings” with [
3, 4] and press
[ENTER].
[6]Select “Set Clock Automatically” with [
3, 4]
and press [ENTER].
[7]Press [ENTER].
≥Auto setting starts. This can take some time, up to a few hours
in some cases. The...")
20 RQTV0134 Other settings “Clock Settings” made here are applied to VHS as well. [1]While stopped Press [FUNCTIONS]. [2]Select “Other Functions” with [ 3, 4] and press [ENTER]. [3]Select “Setup” with [ 3, 4] and press [ENTER]. [4]Select “Setup” with [ 3, 4] and press [2, 1]. [5]Select “Clock Settings” with [ 3, 4] and press [ENTER]. [6]Select “Set Clock Automatically” with [ 3, 4] and press [ENTER]. [7]Press [ENTER]. ≥Auto setting starts. This can take some time, up to a few hours in some cases. The...