Panasonic Dmr Es35 Operating Instructions Manual

21
RQTV0134
Connection (without Audio/Video cable) only
In some cases, interference (lines or patterning) or a very poor 
picture may appear on the TV when the DVD Recorder is 
connected. If this happens, follow the steps below to change 
the video playback channel (RF output channel) to remove the 
interference.
[1]Press [FUNCTIONS] for 
more than 5 seconds.
The RF output channel number is 
displayed on the unit display.
[2]Press [CH,W, X] to 
select a channel number 
(CH3 or CH4).
The unit’s display...

22
RQTV0134
Recording television programs
[1]Press [

23
RQTV0134
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
[RAM] [-R] [-R]DL] [-RW‹V›]
≥You can record up to 99 titles on a disc.
[+R] [+R]DL] [+RW]
≥You can record up to 49 titles on a disc.
≥It is not possible to record digital broadcasts that allow “One time 
only recording” onto DVD-R, DVD-R DL, DVD-RW, +R, +R DL, 
+RW or 8 cm (3q) DVD-RAM discs. Use a CPRM compatible DVD-
RAM.
≥Recording will take place on open space on the disc. Data will not 
be overwritten.
≥If there is no space left on the...

24
RQTV0134
Recording television programs
Depending on the content being recorded, the recording times may 
become shorter than indicated.
This unit uses variable bit rate (VBR) recording which varies the 
amount of data recorded to suit the images, so actual recording 
times and remaining recording times shown by the unit will be 
different. (The difference will be especially noticeable with DVD-
R DL and +R DL.)
Use a disc with plenty of remaining time to be sure.
°
1It is not possible to record or...

25
RQTV0134
The unit automatically switches to standby when it has not been 
used for about 6 hours. 
You can turn this feature off or change the time to 2 hours. 
(l56, “Off Timer”)
[RAM] [-RW‹V›] [+R] [+R]DL] [+RW]
When you insert a new disc and a disc recorded on a computer or 
other equipment, a format confirmation screen might be displayed. 
Format the disc to use it. However all the recorded contents are 
deleted.
Press [2, 1] to select “Yes” and press [ENTER].
≥Several steps are necessary to...

26
RQTV0134
Recording television programs
You can play discs while recording VHS. The recording will not be 
affected.
≥DVD playback (l30)
For your reference
≥You cannot record on discs while VHS recording.
You can play tapes while recording DVD. The recording will not be 
affected.
≥VHS playback (l34)
For your reference
≥You cannot record on tapes while DVD recording.
Preparation
≥Connection (without Audio/Video cable)
-Make sure that the TV indicator is lit on the unit’s display. If it is 
not lit,...

27
RQTV0134
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
The unit calculates a recording rate that enables the recording to fit 
in the time you set (within the remaining time on the disc) with the 
best picture quality.
 
Preparation
≥Select DVD side with pressing [DRIVE SELECT].
≥Select the channel to record. 
[1]While stopped
Press [F Rec].
[2]Press 
[2,1] to select “Hour” and “Min.” and 
press 
[3,4] to set the recording time.
≥You can also set the recording time with the numbered 
buttons.
≥You...

28
RQTV0134
Scheduled Recording
∫Scheduled recording automatically starts at the set 
time.
≥Scheduled recording can be started whether the unit is turned on 
or off. When the unit is turned off, the sound and the video cannot 
be outputted to the TV.
∫Scheduled recording for TV programs cannot be 
executed on both DVD and VHS at the same time.
Make sure the scheduled recording start times do not overlap on 
both DVD and VHS Scheduled Recording List screens.
When the scheduled recording settings...

29
RQTV0134
Preparation
≥Select the drive with the scheduled recording you want to cancel 
by pressing [DRIVE SELECT].
[1]When unit is on
Press [∫, STOP].
≥Confirmation screen appears.
[2]Press [2, 1] to select “Stop Recording” and 
press [ENTER].
≥Recording stops and the scheduled recording is deleted. (Daily 
and weekly schedules remain and scheduled recording will 
start as programmed.)
[1]Press [SCHEDULE].
[2]Press [
3, 4] to select the program and press 
[SUB MENU].
[3]Press [
3, 4] to select...

30
RQTV0134
Playing discs
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] 
[-RW‹VR›] [VCD] [CD]
[1]Press [Í, DVD/VHS POWER] to turn the unit on.
[2]Insert a disc. 
(l22)
[3]Select DVD side with pressing [DRIVE SELECT].
[4]Press [
1, PLAY].
≥The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
≥Playback starts from the most recently recorded title.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
≥Playback starts from the beginning of...