Panasonic Dmp Bdt300 Operating Instructions
Here you can view all the pages of manual Panasonic Dmp Bdt300 Operating Instructions. The Panasonic manuals for CD/DVD/Blu-Ray Drive are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31VQT2J87(ENG)
Settings
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output (>38)
Press [OK] to show the following settings:
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥If “ On ” is selected, the signals that are converted to 48 kHz
are output.
≥ If...](http://img.usermanuals.tech/thumb/58/64164/w300_dmp-bdt300_mul_om_d-30.png "Page 31
31VQT2J87(ENG)
Settings
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output (>38)
Press [OK] to show the following settings:
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥If “ On ” is selected, the signals that are converted to 48 kHz
are output.
≥ If...")
31VQT2J87(ENG) Settings Dynamic Range Compression You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) ≥“Auto” is effective only when playing Dolby TrueHD. Digital Audio Output (>38) Press [OK] to show the following settings: PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT. ≥If “ On ” is selected, the signals that are converted to 48 kHz are output. ≥ If...
Page 32
![Page 32
32VQT2J87(ENG)
3D TypeSelect the format of the connected TV.
≥Change the settings for 3D on the TV also when “Checker
board” and “Side by side” are selected.
TV Aspect
Set to match the type of television connected.
HDMI Connection
Press [OK] to show the following settings:
Component Video Resolution
This sets the video output resolution when connected via the
COMPONENT VIDEO OUT terminal.
≥
Even if you select “720p” or “1080i”, the video output
resolution is restricted to “480p” when images of...](http://img.usermanuals.tech/thumb/58/64164/w300_dmp-bdt300_mul_om_d-31.png "Page 32
32VQT2J87(ENG)
3D TypeSelect the format of the connected TV.
≥Change the settings for 3D on the TV also when “Checker
board” and “Side by side” are selected.
TV Aspect
Set to match the type of television connected.
HDMI Connection
Press [OK] to show the following settings:
Component Video Resolution
This sets the video output resolution when connected via the
COMPONENT VIDEO OUT terminal.
≥
Even if you select “720p” or “1080i”, the video output
resolution is restricted to “480p” when images of...")
32VQT2J87(ENG) 3D TypeSelect the format of the connected TV. ≥Change the settings for 3D on the TV also when “Checker board” and “Side by side” are selected. TV Aspect Set to match the type of television connected. HDMI Connection Press [OK] to show the following settings: Component Video Resolution This sets the video output resolution when connected via the COMPONENT VIDEO OUT terminal. ≥ Even if you select “720p” or “1080i”, the video output resolution is restricted to “480p” when images of...
Page 33
![Page 33
33VQT2J87(ENG)
Settings
Network Easy Setting (>15)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic
products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥Internal control unit will be powered when it is set to “On”, so
contents of the following will be...](http://img.usermanuals.tech/thumb/58/64164/w300_dmp-bdt300_mul_om_d-32.png "Page 33
33VQT2J87(ENG)
Settings
Network Easy Setting (>15)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic
products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥Internal control unit will be powered when it is set to “On”, so
contents of the following will be...")
33VQT2J87(ENG) Settings Network Easy Setting (>15) Network Settings Perform network-related settings individually. Press [OK] to show the following settings: Off Timer Select how long the unit remains on when it is not being used. Remote Control Code Change the remote control code, when other Panasonic products react to this remote control. Quick Start Speed of startup from power off is increased. ≥Internal control unit will be powered when it is set to “On”, so contents of the following will be...
Page 34
![Page 34
34VQT2J87(ENG)
Reference
Troubleshooting guide
Before requesting service, please perform the
following steps.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥ Image disturbance during search.
∫ Unit doesn’t respond to remote control
or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may...](http://img.usermanuals.tech/thumb/58/64164/w300_dmp-bdt300_mul_om_d-33.png "Page 34
34VQT2J87(ENG)
Reference
Troubleshooting guide
Before requesting service, please perform the
following steps.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥ Image disturbance during search.
∫ Unit doesn’t respond to remote control
or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may...")
34VQT2J87(ENG) Reference Troubleshooting guide Before requesting service, please perform the following steps. The following do not indicate a problem with this unit: ≥Regular disc rotating sounds. ≥ Image disturbance during search. ∫ Unit doesn’t respond to remote control or front panel buttons. Press and hold [POWER Í/I] on the main unit for 3 seconds. – If still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord. ∫ Cannot eject disc. The unit may...
Page 35
![Page 35
35VQT2J87 (ENG)
Reference
The images from this unit do not appear on
the television.
Picture is distorted.
¾An incorrect resolution is selected in “Component Video
Resolution” or “HDMI Resolution”. Reset the setting as
follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PRG” is...](http://img.usermanuals.tech/thumb/58/64164/w300_dmp-bdt300_mul_om_d-34.png "Page 35
35VQT2J87 (ENG)
Reference
The images from this unit do not appear on
the television.
Picture is distorted.
¾An incorrect resolution is selected in “Component Video
Resolution” or “HDMI Resolution”. Reset the setting as
follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PRG” is...")
35VQT2J87 (ENG) Reference The images from this unit do not appear on the television. Picture is distorted. ¾An incorrect resolution is selected in “Component Video Resolution” or “HDMI Resolution”. Reset the setting as follows: 1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds. – “00 RET” is displayed on the unit’s display. 2 Repeatedly press [ 1] (right) on the remote control or [POWER Í/I] on the unit until “04 PRG” is...
Page 36
36VQT2J87(ENG) Disc cannot be played. ¾The disc is dirty. (>4) The contents of the USB device cannot be read. ¾USB devices connected usi ng a USB extension cable other than the one included or a USB hub may not be recognized by this unit. ¾If inserted during playback the USB device may not be recognized by this unit. ¾If two USB devices other than Wireless LAN adaptor are connected simultaneously, they will not be recognized by this unit. Still pictures (JPEG) do not play back normally. ¾The...
Page 37
37VQT2J87 (ENG) Reference Messages The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use. Cannot play.¾You inserted an incompatible disc (Discs recorded in PAL video, etc.). Cannot display on this unit.¾You tried to play a non-compatible image.¾Confirm “SD” on the unit’s display is not blinking and re-insert the card. No disc is inserted.¾The disc may be upside down. $ This operation is not available.¾Some...
Page 38
38VQT2J87(ENG) Audio Information The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (>31, Digital Audio Output) ≥ The number of channels listed is the maximum possible number of output channels. HDMI AV OUT/DIGITAL AUDIO OUT (Coaxial/Optical) About audio from audio output terminals TerminalHDMI AV OUTDIGITAL AUDIO OUT “Dolby D/Dolby D +/Dolby TrueHD”/“DTS/DTS-HD” “Bitstream”*1 *1When the connected equipment is not supported with...
Page 39
![Page 39
39VQT2J87 (ENG)
Reference
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP] > “Audio” > Set each item
For details of the each item, refer to page 31.
Recommended audio output setting
Example of connected equipment
TV via HDMI*1
Receiver with
HD audio*2
decoder via HDMI
Receiver without
HD audio*2
decoder via HDMIReceiver via COAXIAL or OPTICALReceiver
via analog output*3Setup menu
“Digital Audio
Output”...](http://img.usermanuals.tech/thumb/58/64164/w300_dmp-bdt300_mul_om_d-38.png "Page 39
39VQT2J87 (ENG)
Reference
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP] > “Audio” > Set each item
For details of the each item, refer to page 31.
Recommended audio output setting
Example of connected equipment
TV via HDMI*1
Receiver with
HD audio*2
decoder via HDMI
Receiver without
HD audio*2
decoder via HDMIReceiver via COAXIAL or OPTICALReceiver
via analog output*3Setup menu
“Digital Audio
Output”...")
39VQT2J87 (ENG) Reference The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items. Press [SETUP] > “Audio” > Set each item For details of the each item, refer to page 31. Recommended audio output setting Example of connected equipment TV via HDMI*1 Receiver with HD audio*2 decoder via HDMI Receiver without HD audio*2 decoder via HDMIReceiver via COAXIAL or OPTICALReceiver via analog output*3Setup menu “Digital Audio Output”...
Page 40
40VQT2J87(ENG) About MP3/JPEG/DivX/ AVCHD/MPEG2 files ≥With certain recording states and folder structures, the play order may differ or playback may not be possible. ≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet This unit is compatible with multi-session. This unit is not compatible with packet writing. ≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660) This unit is not compatible with...