Panasonic Dmp Bdt300 Operating Instructions

							VQT2J87
Operating InstructionsBlu-ray Disc Player
Model No. DMP-BDT300
DMP-BDT350
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please r ead the instructions completely. Please keep this manual for future 
reference.
If you have any questions contactU.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
U.S.A. and Puerto Rico : The warranty can be found on 
page 46.
Canada :The warranty can be found on page 47.
La referencia rápida en español se puede encontrar en la página 48.
until 
2010/2/8
PP
DMP-BDT300_VQT2J87_eng.book  1 ページ  ２０１０年１月２１日　木曜日　午後８時９分 
						

							2VQT2J87(ENG)
Getting started
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. 
Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for 
future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with  the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat  registers, stoves, or other apparatus (including amplifiers) that 
produce heat.
9 Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with one 
wider than the other. A grounding-type plug has two blades and a 
third grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or  table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or  when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required  when the apparatus has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid has been sp illed or 
objects have fallen into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has been dropped.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC 
SHOCK OR PRODUCT DAMAGE, 
≥DO NOT EXPOSE THIS APPARATUS TO RAIN,  MOISTURE, DRIPPING OR SPLASHING AND 
THAT NO OBJECTS FILLED WITH LIQUIDS, 
SUCH AS VASES, SHALL BE PLACED ON THE 
APPARATUS.
≥USE ONLY THE RECOMMENDED  ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR BACK);  THERE ARE NO USER SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, 
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. 
ENSURE THE UNIT IS WELL VEN TILATED. TO PREVENT RISK 
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE 
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN 
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached 
installation instructions and use only shielded interface cables when 
connecting to peripheral devices.
Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate 
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DMP-BDT300_VQT2J87_eng.book  2 ページ  ２０１０年１月１８日　月曜日　午後５時２７分 
						

							3VQT2J87(ENG)
Getting started
Connections & Settings
Playback
Settings
Reference
Table of contents
Getting started
IMPORTANT SAFETY 
INSTRUCTIONS . . . . . . . . . . . . . . . .  2
Accessory . . . . . . . . . . . . . . . . . . . . .  4
Unit and media care  . . . . . . . . . . . . .  4
Control reference guide  . . . . . . . . . .  5
Playable discs/Cards/
USB devices . . . . . . . . . . . . . . . . . . .  6
Connections & Settings
STEP 1 : Connecting to a TV  . . . . . .  8
STEP 2 : Connecting to an amplifier/receiver  . . . .  10
STEP 3 : Connecting to  a broadband network . . . .  12
STEP 4 : Connecting to 
an AC power  . . . . . . . . . .  14
STEP 5 : Setting . . . . . . . . . . . . . . .  14
STEP 6 : Reprogramming 
the remote control  . . . . . .  17
Playback
Inserting or removing media . . . . . .  18
FUNCTIONS menu . . . . . . . . . . . . .  18
Playing video contents  . . . . . . . . . .  19
Enjoying 3D video . . . . . . . . . . . . . .  23
Playing still pictures  . . . . . . . . . . . .  24
Playing music  . . . . . . . . . . . . . . . . .  25
Enjoying VIERA CAST
TM. . . . . . . . .  25
DLNA feature  
[BDT350]. . . . . . . . . . . . .  26
Linked operations with the TV 
(VIERA LinkTM “HDAVI ControlTM”). . . . . . . . . . .  27
Settings
Playback menu . . . . . . . . . . . . . . . .  28
Setup menu  . . . . . . . . . . . . . . . . . .  30
Reference
Troubleshooting guide  . . . . . . . . . .  34
Messages . . . . . . . . . . . . . . . . . . . .  37
Audio Information . . . . . . . . . . . . . .  38
About MP3/JPEG/DivX/
AVCHD/MPEG2 files  . . . . . . . . . . .  40
Supplemental information . . . . . . . .  42
Specifications . . . . . . . . . . . . . . . . .  43
Glossary . . . . . . . . . . . . . . . . . . . . .  45
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO) . . .  46
Limited Warranty 
(Only for CANADA) . . . . . . . . . . . . .  47
Referencia rápida en español 
(Spanish Quick Reference) . . . . . . . . . .  48
Index . . . . . . . . . . . . . . . . . . . . . . . .  49
About descriptions in these operating 
instructions
≥ Instructions for operations are generally described 
using the remote control.
≥ These operating instructions are applicable to models 
DMP-BDT300 and DMP-BDT350.
[BDT300] [BDT350]  : indicates features applicable to 
DMP-BDT300 and DMP-BDT350, respectively.
About Firmware updates (>17)
DMP-BDT300_VQT2J87_eng.book  3 ページ  ２０１０年１月２１日　木曜日　午後８時９分 
						

							4VQT2J87(ENG)
Accessory
Check the supplied accessories before using this unit.
1 Remote control(N2QAYB000508)
1 Audio/Video cable (K2KA6BA00004)
2 Batteries for remote control
1 AC power supply cord (K2CB2CB00022)
1 Wireless LAN Adaptor (DY-WL10*) (C5ZZZ0000048)
1 USB extension cable (DY-WL10*) (K2KYYYY00064)
* DY-WL10 includes Wireless LAN Adaptor and USB  extension cable, and it is sold in the market.
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to 
the English display on the front and back side of the unit.
	≥ Product numbers correct as of January 2010. These may be subject to 
change.
≥ Do not use AC power supply cord and Wireless LAN Adaptor with other 
equipment. Wireless LAN Adaptor is not designed to use with PC
.≥MAC address is stated on the bottom of Wireless LAN Adaptor.
≥ Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory 
Purchases (United States and Puerto Rico)” on page 46. 
For other areas: To order accessories, call the dealer from whom you 
have made your purchase.
Insert so the poles ( i and j) match those in the remote 
control.
Point it at remote control signal sensor on this unit. ( >5)
	Mishandling of batteries can cause electrolyte leakage which can damage 
items the fluid contacts and may cause a fire.
≥Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight 
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place
CAUTIONDanger of explosion if battery is incorrectly replaced. Replace only with 
the same or equivalent type recommended by the manufacturer. 
Dispose of used batteries according to the manufacturer’s instructions.
Unit and media care
∫ Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this 
unit.
≥ Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
∫ Clean the lens with the lens cleaner 
disc
∫ Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling precautions
≥Handle discs by the edges to avoid inadvertent scratches or 
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static 
electricity prevention liqui ds or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals 
on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or  labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs,  such as heart shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in the unit. If 
you discard this unit either by  disposal or transfer, then follow 
the procedure to return all the settings to the factory presets to 
delete the user settings. ( >34, “To return all settings to the 
factory preset.”)
≥ The operation history may be recorded in the memory of 
this unit.
Using the remote control
R6/LR6, AA


(Alkaline or manganese batteries)
Lens cleaner disc: RP-CL720PP (not included)
≥
This lens cleaner is sold as specific for DIGA, but can be 
used on this unit as well.
DO  DO NOT
VQT2J87~Body_eng.fm  4 ページ  ２０１０年１月２７日　水曜日　午前９時１４分 
						

							5VQT2J87(ENG)
Getting started
Control reference guide
1 Turn the unit on and off (>14)
2 Open or close the disc tray ( >18)
CAUTION
Do not place objects in front of the unit. The disc tray may 
collide with objects when it is opened, and this may cause 
malfunction.
3 Select title numbers, etc./Enter numbers or characters  (> 25)
[CANCEL] : Cancel
4 Basic playback control buttons ( >19)
5 Show status messages ( >19)
6 Show Top menu/Direct Navigator ( >19)
7 Selection/OK, Frame-by-frame ( >19)
8 Show sub menu ( >20)
9 These buttons are used when;
≥Operating a BD-Video disc that includes Java
TM 
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens. 
(> 24)
≥ Operating contents of VIERA CAST. ( >25)
10 Show Setup menu ( >30)
11 Switch on/off Secondary Video (Picture-in-picture) ( >21)
12 Transmit the remote control signal
13 TV operation buttons ( >17)
You can operate the TV through the unit’s remote control.
[ Í TV POWER] : Turn the television on and off
[INPUT]  : Input select
[ ijVOL]  : Adjust the volume
[ WXCH] :  Channel select
14 Adjust the volume of an amplifier/receiver.
15 Select audio ( >19)
16 Displays the Home screen of the VIERA CAST ( >25)
17 Exit the menu screen
18 Show Pop-up menu ( >19)
19 Show Functions menu ( >18)
20 Return to previous screen
21 Select drive (BD/DVD/CD, SD card or USB device) 
(> 18)
22 Show Playback menu ( >28)
1 POWER button ( POWER Í/I)  (> 14)
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power.
2 Disc tray (> 18)
3 Display
The indicator blinks when reading data from a disc, a card 
or a USB device, or writing data to a card.
4 V.OFF LED (Video off LED) ≥It is possible to set the LED to turn on/off. ( >31) 5 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20 e up and down, 30e  left and right
6 Open or close the disc tray ( >18)
7 SD Card LED ≥It is possible to set the LED to turn on/off. ( >31)
8 SD card slot ( >18)
9

USB port ( >18)
10 Stop ( >19)
11 Start play ( >19)
Rear panel terminals ( >8–14)
1
2
3
4
5
6
7
9
8
11
10 19 1821
20 15
16
17 14 13 12
22
125
87910
463
11
Pull to flip down 
the front panel.
Disc indicator SD card indicator USB device indicator
DMP-BDT300_VQT2J87_eng.book  5 ページ  ２０１０年１月２１日　木曜日　午後８時９分 
						

							6VQT2J87(ENG)
Playable discs/Cards/USB devices
TypeLogo examplesType detailPlayable contents
BD-VideoVideo
BD-RE Video
JPEG
BD-R Video
DivX
®
DVD-Video
Video
DVD-RAM Video
AV C H D
JPEG
DVD-R Video
AV C H D
DivX
MP3
JPEG
DVD-R DL
DVD-RW Video
AV C H D
—+R/+RW/+R DL
Music CD Music [CD-DA]
—CD-R
CD-RW DivX
Music [CD-DA]
MP3
JPEG
SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
SDHC Memory Card (4 GB to 32 GB)
(Includes microSDHC Card)
SDXC Memory Card (48 GB, 64 GB)
(Includes microSDXC Card)
MPEG2
AV C H D
JPEG
—USB devices
(up to 128 GB) DivX
MP3
JPEG
BD
DVD
CD
SD
USB
DMP-BDT300_VQT2J87_eng.book  6 ページ  ２０１０年１月１８日　月曜日　午後５時２７分 
						

							7VQT2J87(ENG)
Getting started
∫Discs that cannot be played in this unit
Any other disc that is not specifically supported or 
previously described.
≥2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the 
region code  A.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the 
region number  “1” or “ALL” .
Example:
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by 
a recorder, etc. needs to be finalized by the recorder to play 
on this unit. Please refer to the recorder’s instructions.
∫BD-Video
≥3D videos can be played back  when this unit is connected 
to a 3D compatible TV using an HDMI cable.
≥ This unit supports high bit rate audio (Dolby Digital Plus, 
Dolby TrueHD, DTS-HD High Resolution Audio and 
DTS-HD Master Audio) adopted in BD-Video. In order to 
enjoy these audio formats, refer to page 38.
∫ Music CD
≥Operation and sound quality of CDs that do not conform to 
CD-DA specifications (copy  control CDs, etc.) cannot be 
guaranteed.
≥ The digital audio content side of a DualDisc does not meet 
the technical specifications  of the Compact Disc Digital 
Audio (CD-DA) format so playback may not be possible.
∫ SD card
≥MiniSD Cards, microSD Cards, microSDHC 
Cards and microSDXC Cards can be used, but 
must be used with an adaptor card. These are 
usually supplied with such cards, or otherwise 
customer provided.
≥ Keep the Memory Card out of reach of children 
to prevent swallowing.
≥ To protect the card’s contents, move the record prevention 
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD 
Card Specifications FAT12 and FAT16 formats, as well as 
SDHC Memory Cards in FAT32 format (Does not support 
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or 
devices, recorded contents may be erased due to the card 
being formatted etc.
≥ Useable memory may be slightly less than the card 
capacity.
∫ USB device
≥This unit supports connecting a USB memory, digital 
camera and video camera produced by Panasonic, etc. It is 
not warranted that all USB devices will work with this unit.
≥ This unit does not support USB device charging. 
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
	≥ It may not be possible to play the above media in some cases due to the 
type of media, the condition of the recording, the recording method and 
how the files were created.
≥ The producers of the disc can control how discs are played, so you may 
not always be able to control play as described in these operating 
instructions. Read the disc’s instructions carefully.
2
4
1ALL1
DMP-BDT300_VQT2J87_eng.book  7 ページ  ２０１０年１月１８日　月曜日　午後５時２７分 
						

							8VQT2J87(ENG)
STEP 1 : Connecting to a TV
≥Do not place the unit on amplifiers/receivers or equipment 
that may become hot. The heat can damage the unit.
≥ Before making any connections  we suggest you temporarily 
disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due 
to copy guard protection the picture may not be displayed 
properly.
≥ Refer to page 39, about recommended settings for each 
piece of connected equipment.
≥ Please use High Speed HDMI Cables that have the HDMI 
logo (as shown on the cover). It is recommended that you 
use Panasonic’s HDMI cable. When outputting 1080p 
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number: 
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), 
RP-CDHS50 (5.0 m/16.4 ft.), etc.
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback  3D videos by connecting this 
unit with a 3D compatible TV.
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On” 
(> 32).
≥ The HDMI connection using HDMI MAIN AV OUT supports 
VIERA Link “HDAVI Control” ( >27). 
Highest Quality
(VIDEO)
HDMI IN
HDMI cable
DMP-BDT300_VQT2J87_eng.book  8 ページ  ２０１０年１月１８日　月曜日　午後５時２７分 
						

							9VQT2J87(ENG)
Connections & Settings
∫Via a COMPONENT VIDEO OUT terminal ∫Via a VIDEO OUT terminal
≥Connect terminals of the same color.
≥ Set “Component Video Resolution” to “480p”, “720p” or 
“1080i” (> 32). 
≥ Set “HDMI Video Mode” to “Off” ( >32). ≥
Connect terminals of the same color.
Standard Quality
(VIDEO)
COMPONENT VIDEO INAUDIO IN
R         L
Component 
Video cable
Audio/Video 
cable
(included)
AUDIO IN
R         LVIDEO IN
Audio/Video 
cable (included)
DMP-BDT300_VQT2J87_eng.book  9 ページ  ２０１０年１月１８日　月曜日　午後５時２７分 
						

							10VQT2J87(ENG)
STEP 2 : Connecting to an amplifier/receiver
Digital Audio
∫Via an HDMI MAIN AV OUT terminal
– It is possible to playback  3D videos when the connected 
TV and amplifier/receiver are 3D compatible.
∫ Via an HDMI MAIN AV OUT and HDMI SUB AV 
OUT terminal
– It is possible to playback 3D videos when the connected 
TV is 3D compatible, even if the amplifier/receiver is not 
3D compatible.
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On” 
(> 32).
≥ Set “Digital Audio Output” depending on the connected 
amplifier/receiver ( >31).
≥ The HDMI connection using HDMI MAIN AV OUT supports 
VIERA Link “HDAVI Control” ( >27).  ≥
Set “HDMI Video Mode” and “HDMI Audio Output” to “On” 
(> 32).
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. ( >23)
– Audio is output in high resolution regardless of 
compatibility of the amplifier/receiver with 3D.
≥ The HDMI connection using HDMI MAIN AV OUT supports 
VIERA Link “HDAVI Control” ( >27). 
The HDMI SUB AV OUT terminal is not compatible with the 
VIERA Link “HDAVI Control”.
HDMI IN
HDMI IN
HDMI IN
Multi channel 
speakers
Amplifier/receiver HDMI cable
HDMI cable
HDMI IN
HDMI IN
HDMI cable Amplifier/receiverMulti channel 
speakers
VQT2J87~Body_eng.fm  10 ページ  ２０１０年１月２６日　火曜日　午後２時４１分