Panasonic Dmp B200 Owners Manual

							Playback
VQT3C15
21
Using this unit with other 
equipment
It is possible to enjoy the high quality video and audio of this 
unit on the large screen by connecting this unit with the TV 
using a single cable.
≥Turn off all equipment before connecting and read the 
appropriate operating instructions.
≥ Linked operation is possible by connecting to a 
Panasonic TV (VIERA) or amplifier that is compatible 
with the VIERA Link (HDMI) function. ( >22)
Preparation
Connect the devices to the unit.
You can enjoy the high quality surround audio in Dolby Digital 
Plus and Dolby TrueHD by connecting this unit to the HDMI 
compatible multi-channel amplifier. ( >30) (Only when 
connected to an amplifier compatible with each audio)
1Turn on the power of the connected device 
(TV, etc.), and switch the input.
Example: Set the input to “HDMI” or similar (the name of 
input may be different depending on the connected device).
2Start playback on this unit.
Video and audio are output from the connected device. Notice
≥
To turn off the display of this unit, select “Off” for the “Monitor” 
in the “LCD Menu”. ( >13)
≥ The quality of video will lower on the screen of this unit when 
HDMI is connected, but it is not a malfunction.
≥ If you raise the volume on the television while playing this 
unit, the volume may abruptly become very loud when you 
switch to a television broadcast. Return the volume to its 
normal level before changing.
≥Non-HDMI-compliant cables cannot be utilized.
≥ Please use High Speed HDMI Cables that have the 
HDMI logo (as shown on the cover). It is 
recommended that you use Panasonic’s HDMI cable. 
When outputting 1080p signal ( >28, “HDMI 
Resolution”), please use HDMI cables 5.0 meters 
(16.4 ft.) or less.
Recommended part number: 
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), 
RP-CDHS50 (5.0 m/16.4 ft.), etc.
AV  O U T
HDMI IN
Television HDMI cable
(not supplied)
DMP-B200P&PC-VQT3C15_eng.book  21 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							VQT3C15
22
Linked operations with 
the TV
(VIERA Link™ “HDAVI Control™”)
Preparation
Connect this unit to your TV or amplifier/receiver with an HDMI 
cable (>21).
1Set “VIERA Link” to “On” ( >29). 
(The default setting is “On”.)
2Set the “HDAVI Control” operations on the 
connected equipment (e.g., TV).
3Turn on all “HDAVI Control” compatible 
equipment and select this unit’s input 
channel on the connected TV so that the 
“HDAVI Control” function works properly.
Also when the connection or settings are changed, 
repeat this procedure.
When you want to leave the TV on and set only this 
unit to standby mode
Press [POWER Í] on this unit’s remote control and set to 
standby mode. When the following operations are performed, the television will 
automatically switch the input channel and display the 
corresponding action.
j
When play starts on the unit
j When an action that uses the display screen is performed 
(e.g., DIRECT NAVIGATOR screen)
j When the HDMI is connected, with the unit turned on (first 
time only)
When the television is off and the following operations are 
performed, the television will automatically turn on and display 
the corresponding action.
j When play starts on the unit
j When an action that uses the display screen is performed 
(e.g., DIRECT NAVIGATOR screen)
All connected equipment compatible with “HDAVI Control”, 
including this unit, automatically turns off when you switch the 
television off.
≥ This unit automatically turns off even during playback or any 
other operation.
≥When [ 1] (PLAY) is pressed on this unit for “Automatic input 
switching” or “Power on link”, the playback image is not 
immediately displayed on the screen and it may not be 
possible to watch the contents from where playback started.
In this case, press [ :] or [6] to go back to where 
playback started.
Playing music continuously even after turning off 
power to the television
When the unit is connected to a Panasonic TV (VIERA) that 
supports HDAVI Control 2 or later and other device supports 
VIERA Link, the unit is turned off if the power to the television is 
turned off, since “Power off link” ( >above) operates.
The following operations make it possible to keep the power of 
the unit ON and to play music continuously.
1 While playing music
Press [SUB MENU].
2 Press [ 3,4 ] to select “TV Power” and press [OK].
≥ Sound may be discontinued for several seconds when the 
power to the television is turned off.
≥ If the operation mentioned above is executed while audio is 
output from the television, the sound may not be output from 
the device. It is recommended to set the device beforehand 
so that audio will be output from the device.
When not using “HDAVI Control”
Set “VIERA Link” in the Setup menu to “Off”. ( >29)
What is VIERA Link “HDAVI Control”?
VIERA Link™ is a new name for EZ Sync™.
VIERA Link “HDAVI Control” is a convenient function 
that offers linked operations of this unit, and a 
Panasonic TV (VIERA) or amplifier/receiver under 
“HDAVI Control”. 
You can use this function by connecting the equipment 
with an HDMI cable. See the operating instructions for 
connected equipment for operational details.
≥VIERA Link “HDAVI Control”, based on the control 
functions provided by HDMI which is an industry standard 
known as HDMI CEC (Consumer Electronics Control), is a 
unique function that we have developed and added. As 
such, its operation with other  manufacturers’ equipment 
that supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of 
December, 2010) for Panasonic’s HDAVI Control 
compatible equipment. This standard is compatible with 
Panasonic’s conventional HDAVI equipment.
≥ Please refer to individual manuals for other 
manufacturers’ equipment supporting VIERA Link 
function.
Setting VIERA Link™ “HDAVI 
Control™”
Automatic input switching
Power on link
Power off link
DMP-B200P&PC-VQT3C15_eng.book  22 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							Playback
VQT3C15
23
If you connect this unit to the TV that supports 
“HDAVI Control 2” or later with an HDMI cable, you can enjoy 
using more convenient functions.
You can operate this unit using buttons on the TV remote 
control.
The buttons that you can use for this unit vary depending on 
the TV. For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot 
operate this unit using buttons on the TV remote control.
≥The operation of this unit may be interrupted when you press 
incompatible buttons on the TV remote control.
By using the TV remote control, you can play media using the 
FUNCTION MENU.
1Press the button for VIERA Link on the 
remote control.
2Select the player.
The FUNCTION MENU is displayed. ( >12)
≥When the AC adaptor is connected while the unit is turned 
off, the unit will automatically turn on. For details, please refer 
to the TV user manual.
≥ Keep the screen of this unit opened. If the screen of this unit 
is closed, this unit cannot be operated with the TV remote 
control in any other condition. By using the TV remote control,
 you can play discs using the 
“Control Panel” and display the Top Menu (for BD-Video and 
DVD-Video) or Pop-up M enu (for BD-Video), etc.
1Press [SUB MENU].
≥This can also be displayed by using the VIERA menu 
screen.
≥ The sub menu may not appear while the Top Menu for 
BD-Video or DVD-Video is displayed.
2Select an item, then press [OK].
≥Control Panel is displayed by selecting “Control Panel”. 
Follow the indications on the screen.
Easy control only with VIERA 
remote control
Using the FUNCTION MENU to operate this 
unit
Using the sub menu to operate this unit
Settings for Playback
Other Functions
SUB
MENURETURNOK
e.g.,
DMP-B200P&PC-VQT3C15_eng.book  23 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							VQT3C15
24
Settin gs
Changing settings with 
the on-screen menu
1Press [DISPLAY].
≥It is also possible to display with the following 
procedures:
≥ Depending on the condition of the unit (playing, stopped, 
etc.) and media contents, there may be some items that 
you cannot select or change.
2Press [ 3,4] to select the menu and press 
[ 1].
3Press [ 3,4,2, 1] to select the item and 
press [ 1].
4Press [ 3,4] to select the setting.
≥Some items can be changed by pressing [OK].
To exit the on-screen menu
Press [DISPLAY] or [EXIT].
Signal Type
[BD-V]
! Primary Video
! Secondary Video
Video
[AVCHD]
The recording method of original video appears. 
(>25, “Video attribute”)
Soundtrack
[AVCHD]  [DVD-V]
Select the type of audio or language. 
(> 25, “Language”, “Audio attribute”)
[DVD-VR]  [MPEG2]
The audio attributes appear. ( >25, “Audio attribute”)
[MKV]
Select the soundtrack number.
≥ Soundtrack numbers are displa yed even when there is only 
one audio type.
Subtitle
[BD-V]  [AVCHD] [DVD-V]
Turn the subtitle on/off and select the language. 
(> 25, “Language”)
[DVD-VR]  (Only discs that contain subtitle on/off information)
Turn the subtitle on/off.
[MKV]
Turn the subtitle on/off and select “Text” or the subtitle number.
≥ Subtitle number is displayed even if there are not multiple 
subtitles.
Subtitle Style
[BD-V]
Select the subtitle style.
Audio channel
[DVD-VR]  [MKV]  [MPEG2]
Select the audio channel number.
(> 16, “Changing audio”)
Angle
[BD-V]  [DVD-V]
Select the number of the angle.
Some items may be changed only on the disc specific menu. 
(> 14)
On-screen menu operations
1 Press [SUB MENU].
2 Select “Settings for Playback” with [ 3,4], and press 
[OK].
Video Audio 
Play Signal Type 
Subtitle 
Subtitle Style 
Off Main
- Angle - 
1ENG 
Media
Menus Items Settings
e.g., BD-Video
What you can change with the 
on-screen menu
Media
Video: The recording method of original video 
appears. (>25, “Video attribute”)
Soundtrack: Select the type of audio or language.  (> 25, “Language”, “Audio attribute”)
Video: Select on/off of images. The recording method of original video 
appears. (>25, “Video attribute”)
Soundtrack: Select on/off of audio and the language. 
(> 25, “Language”, “Audio attribute”)
DMP-B200P&PC-VQT3C15_eng.book  24 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							Settings
VQT3C15
25
Repeat Play
(Only when the elapsed time is being displayed on the display.)
Select the item which you want to repeat. The items displayed 
differ depending on the type of media.
Select “Off” to cancel.
Random
[CD] [MP3]
While playing, press [ 3,4] to select “On”.
Random playback starts from the next track.
Picture
[BD-V]  [AVCHD]  [DVD-VR]  [DVD-V] [MKV]  [MPEG2]
Select the picture quality mode during play.
Progressive
Select the method of conversion for progressive output to suit 
the type of material being played ( >40, “Film and video”).
24p
[DVD-V]
Movies and other material recorded on DVD-Video at 24p are 
output at 24p.
Only when you have selected “On” in “24p Output” ( >28)
Dialog Enhancer
[BD-V]  [AVCHD]  [DVD-VR]  [DVD-V]  [MKV]  [MPEG2]  
(3 channels or more only, including a center channel)
The volume of the center channel is raised to make dialog 
easier to hear.
This function is effective for audio from the HDMI AV OUT 
terminal only when “Dolby D/Dolby D +/Dolby TrueHD” or 
“DTS” is set to “PCM”.
Language
Audio attribute
Video attribute
Play
! All tracks: All tracks
! Chapter: Chapter
! Playlists: Playlist
! Title: Title
! One track: Track
! Off
! On !Off
Video
!Normal: Default setting
! Soft:  Soft picture with smoother video
! Fine: Details are sharper
! Cinema: Mellows movies, enhances detail in dark 
scenes.
! User:  You can make further adjustments. 
(>below)
1 Press [ 1] to select “Picture Adjustment” and press [OK].
2 Select the item using [ 3,4 ] and adjust it with [ 2,1].
Contrast: Increases the contrast between light and  dark parts of the picture ( j7 to i7).
Brightness: Brightens the picture (0 to  i15).
Sharpness: Adjusts the sharpness of the edges of the  horizontal lines ( j6 to i6).
Color: Adjusts the shade of the picture’s color ( j7 
to  i7).
Gamma: Adjusts the brightness of dark portions of the 
screen (0 to i5).
3D NR: Reduces the rough noise in the background  to give a greater feeling of depth (0 to  i4).
When “24p Output” is set to “On”, this 
function may not operate. ( >28)
Integrated NR: Smoothes block noise and reduces the 
smudging that appears around contrasting 
sections of the picture (0 to i3).
!Auto: Automatically detects the film and video 
content, and appropriately converts it.
! Video: Select when using “Auto” and the content is 
distorted.
! On !Off
Audio
!On !Off
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: VietnameseTHA: Thai
POL: Polish
CES: Czech
SLK: Slovak
HUN: Hungarian
FIN: Finnish
ARA: Arabic
HIN: Hindi
PER: Persian
IND: Indonesian
MRI: Maori
BUL: Bulgarian
RUM: Romanian
GRE: Greek
TUR: Turkish
¢: Others
LPCM/ Digital/ Digital+/
TrueHD/DTS/DTS 96/DTS-HD HI 
RES/DTS-HD MSTR/MPEGSignal type
ch (channel)Number of channels
k (kHz)Sampling frequency
b (bit)Number of bits
bps (bit per second)Transfer rate of bit
MPEG-2/MPEG-4 AVC/VC-1Video recording method
480/576/720/1080Video Format
24p/50i/60i/50p/60pVideo Frame rate
YCbCr4:2:2/YCbCr4:4:4/RGBColor Space
bps (bit per second)Transfer rate of bit
DMP-B200P&PC-VQT3C15_eng.book  25 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							VQT3C15
26
Changing the unit’s 
settings
Change the unit’s settings if necessary. The settings remain 
intact even if you switch the unit to standby.
1While stopped
Press [SETUP].
2Press [3,4] to 
select the menu and 
press [OK].
3Press [ 3,4] to 
select the item and 
press [OK].
If there are any other items, repeat these steps.
4Press [ 3,4, 2,1] to select the option and 
press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP] or [EXIT].
≥ There may be differences in operation methods. If this 
happens, follow the on-screen instructions for the operation.
Underlined items are the factory presets.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit password with 
the numbered buttons when the password screen is shown.
BD-Video Ratings
Set an age limit of BD-Video play.
Follow the on-screen instructions. Enter a 4-digit password with 
the numbered buttons when the password screen is shown.
Audio Language
Choose the language for audio.
[BD-V]  [DVD-V]
≥ Some discs start in a certain language despite any changes 
you make here.
≥ When the selected language is not available on the disc, the 
default language is played. There are discs where you can 
only switch the language from the menu screen. ( >14)
≥ Enter a code ( >29) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Subtitle Language
Choose the language for subtitle.
[BD-V] [DVD-V]
≥ Some discs start in a certain language despite any changes 
you make here.
≥ When the selected language is not available on the disc, the 
default language is played. There are discs where you can 
only switch the language from the menu screen. ( >14)
≥ Enter a code ( >29) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Menu Language
Choose the language for disc menus.
[BD-V] [DVD-V]
≥ Some discs start in a certain language despite any changes 
you make here.
≥ When the selected language is not available on the disc, the 
default language is played. There are discs where you can 
only switch the language from the menu screen. ( >14)
≥ Enter a code ( >29) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Subtitle Text
[MKV]
Select a suitable item according to the language used for MKV 
subtitles text ( >14).
≥ This item is displayed only after playing back a file.
Setup menu operations
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”( >below)
≥ “BD-Video Ratings”( >right)
Summary of settings
Disc
! 8 No Limit:
All DVD-Video can be played.
! 1 to 7:
Prohibits play of DVD-Video with corresponding ratings 
recorded on them.
! 0 Lock All:
Prohibits play of all DVD-Video.
Changing settings (When level 0 to 7 is selected)
! Unlock Player !Change Password
! Change Level !Temporary Unlock
RETURN
Player SettingsDiscVideoAudioDisplayTV Aspect / HDMI Function SettingsOthers
OK
!No Limit:
All BD-Video can be played.
! Enter year(s).:
Prohibits play of BD-Video with corresponding ratings 
recorded on them.
! 0 to 21 year(s):
Prohibits play of BD-Video with corresponding ratings 
recorded on them.
Changing settings (When 0 to 254 year(s) is selected)
! Unlock Player !Change Password
! Change Level !Temporary Unlock
! English
!French !Spanish
! Original:
The original language of each disc will be selected.
! Other  ¢¢¢¢
! Automatic
:
If the language selected for “Audio Language” is not 
available, subtitles of that language will automatically 
appear if available on that disc.
! English !French !Spanish
! Other  ¢¢¢¢
! English
!French !Spanish
! Other  ¢¢¢¢
DMP-B200P&PC-VQT3C15_eng.book  26 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							Settings
VQT3C15
27
Still Mode ( paused video ) 
[BD-V] [AVCHD]  [DVD-V]
Select the type of picture shown when you pause playback 
(> 40, “Frames and fields”).
Seamless Play 
[DVD-VR]
Select the play mode between playlist chapter segments and 
partially deleted titles.
Dynamic Range Compression
[BD-V]  [AVCHD]  [DVD-V]  [MKV]
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings.
≥For details on digital output ( >30)
Video
! Auto:
Automatically selects the type of picture shown.
! Field:
Select if jittering occurs when “Auto” is selected. (The 
picture is coarser.)
! Frame:
Select if small text or fine  patterns cannot be seen clearly 
when “Auto” is selected. 
(The picture is clearer and finer.)
! On
:
The chapters in playlists are played seamlessly. This does 
not work while searching or when there are several audio 
types included on the playlist. Additionally, the positioning 
of chapter segments may change slightly.
! Off:
The points where chapters in playlists change are played 
accurately, but the picture may freeze for a moment.
Audio
!On !Off!Auto
Dolby D/Dolby D +/Dolby TrueHD
DTS
Select whether Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD or DTS Digital Surround  is output in “Bitstream” or 
“PCM” format.
≥ Not making the proper settings may result in noise.
≥ If the unit is connected with the HDMI AV OUT terminal, 
the specifications of the connected equipment take 
precedence over this unit  and audio selected in these 
items may not be output (e.g., when a television is 
connected, the HDMI audio output of this unit is limited to 
down-mixed 2ch.)
! Bitstream
:
Select “Bitstream” when the connected equipment can 
decode the respective audio format. 
j Connect equipment supporting HDMI (High Bit rate 
Audio) and use a High Speed HDMI Cable in order to 
output high bit rate audio such as Dolby Digital Plus or 
Dolby TrueHD.
! PCM:
Select “PCM” when the connected equipment cannot 
decode the respective audio format.
Refer to the operating instructions for connected devices to 
verify whether or not they can decode each of the audio 
formats.
BD-Video Secondary Audio 
[BD-V]
Turn on/off the button click sound on the menu and audio 
with secondary video in picture-in-picture mode. ( >17)
! On
:
The primary audio and secondary audio are mixed and 
output. The sampling frequency is converted to 48 kHz.
! Off:
The button click sound on the menu and secondary 
audio are not output.
DMP-B200P&PC-VQT3C15_eng.book  27 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							VQT3C15
28
Downmix
Switch the downmix system for playing back multi-channel 
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS” is set to 
“Bitstream”, there are no downmix effects for the outputted 
audio.
≥ The audio will be output in “Stereo” in the following cases:
jAVCHD playback
j Playback of secondary audio (i ncluding the button click 
sound)
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen 
messages.
Screen Saver Function
License
Information about the software used by this unit is displayed.
TV Aspect
“TV Aspect” operates on the screen of the unit or the 
connected TV. 
To view an image connected to a 4:3 TV:
To view an image on the unit or connected to a 16:9 
widescreen TV:
HDMI Connection
Press [OK] to show the following settings.
! Stereo:
When connected to equipment that does not support the 
virtual surround function.
! Surround encoded:
When connected to equipment that supports the virtual 
surround function (to convert 2-channel to multi channel 
surround).
Display
!Automatic!Off
! English
!Français !Español
! On
:
j If there is no operation for  10 minutes or more, DIRECT 
NAVIGATOR screen switches to FUNCTION screen 
automatically.
j While playing and pausing, etc., this function is not 
available.
j As for Music (CD-DA, MP3), regardless of the setting, if 
there is no operation for 2 minutes, DIRECT 
NAVIGATOR screen switches  to the other states 
automatically.
j When playing the 4:3 image, the masked-off area on the 
screen become black.
[Only when connecting with an HDMI cable, “TV Aspect”
(> right) is set to “16:9” and “HDMI Resolution”
(> right) is set to any mode other than“480p”.]
! Off
TV Aspect / HDMI Function Settings
!4:3 Pan & Scan:
Video recorded for a widescreen is played as Pan & Scan 
(unless prohibited by the producer of the disc). When 
playing BD-Video, video is output as “4:3 Letterbox”.
! 4:3 Letterbox: 
Video recorded for a widescreen is played in the letterbox 
style.
! 16:9
:
Video recorded for 4:3 aspect screen is displayed as a 4:3 
ratio image in the center of the screen.
! 16:9 Full:
Video recorded for 4:3 aspect screen is displayed as a 
horizontally stretched 16:9 image.
HDMI Resolution*
The items supported by the c onnected devices are indicated 
on the screen as “ ¢”. When any item without “ ¢” is 
selected, the images may be distorted.
* In this unit, a P4HD ( >41) video processor is used to provide 
video of optimal resolution to the connected TV.
≥ If the image is distorted,  set to “480p” or set again 
correctly.
! Auto
:
Automatically selects the output resolution best suited to 
the connected television (1080p, 1080i or 480p).
! 480p !720p
! 1080i !1080p
j To enjoy high definition video up-converted to 1080p, you 
need to connect the unit directly to 1080p compatible 
HDTV (High Definition Television). If this unit is connected 
to an HDTV through other equipment, it must also be 
1080p compatible.
24p Output 
[BD-V]  [DVD-V]
When this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set 
“24p” in “Video” ( >25) to “On”.
(Nothing will be displayed on the screen of this unit.)
≥ When BD-Video images other than 24p are played, 
images are output at 60p.
! On
! Off
DMP-B200P&PC-VQT3C15_eng.book  28 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							Settings
VQT3C15
29
Quick StartSpeed of startup from power off is increased.
≥Quick Start only functions w hen the AC adaptor is connected.
Energy Saving Settings
Press [OK] to show the following settings.
Easy Setting
You can execute basic settings 
(“On-screen Language” and “Quick Start”).
Restore Default Settings
This returns all values in the Setup menu and the on-screen 
menu, except for “On-screen Language”, “DVD-Video Ratings” 
and “BD-Video Ratings” to the default settings.
System Information
Display firmware version of this unit.
Language code list
Enter the code with the numbered buttons.
HDMI RGB Output Range
Effective when connected to a device that only supports 
RGB output.
! Standard
:
The video is output as it is.
! Enhanced:
When the black and white contrast of a video is low, the 
signal is enhanced to reproduce clear video.
HDMI Audio Output
Set whether or not to output audio from the HDMI AV OUT 
terminal.
!On
!Off
VIERA Link
Set to use “HDAVI Control” function when connected with an 
HDMI cable to a device that  supports “HDAVI Control”.
! On
!Off:
Select when you do not want to use “HDAVI Control”.
Contents Type Flag
Depending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports this 
function is connected.
!Auto
!Off
Others
!On:
Since internal control unit will be powered, power 
consumption in standby mode ( >38) will increase in 
comparison to when “Off”.
! Off
Automatic Standby (No Action)
Select whether the unit is automatically turned off when 
about 15 minutes (about 5 minutes when using the battery 
pack) have elapsed while stopped.
! On
!Off:
Select when you do not want to use this function.
ECO-charge
Charging of the battery pack will be controlled to 80 % when 
set to “On”, and therefore prev ent exhaustion of the battery 
pack.
! On
! Off
!Ye s !No
!Ye s !No
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic
:6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577 Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji:
7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178 Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686 Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai:
8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
V ietnamese: 8673
V olapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
DMP-B200P&PC-VQT3C15_eng.book  29 ページ  ２０１０年１２月２２日　水曜日　午後６時２分 
						

							VQT3C15
30
Reference
Enjoying High Bit rate Audio
The audio output differs depending on the settings on the unit. (>27, “Digital Audio Output”)
≥ The number of channels listed is the maximum possible number of output channels.
[BD-V]
This unit supports high bit rate audio (Dolby  Digital Plus and Dolby TrueHD) adopted in BD-Video.
In order to enjoy these audio formats,  the following conditions are necessary.
NECESSARY CONNECTIONS
≥ HDMI AV OUT terminal: ( >21)
NECESSARY SETTINGS
≥ Set “BD-Video Secondary Audio” to “Off”. ( >27)
≥ Set “HDMI Audio Output” to “On”. (> 29)
≥ Set “Dolby D/Dolby D +/Dolby TrueHD” to “Bitstream”. ( >27)
≥The button click sound on the menu and audio with secondary video in picture-in-picture mode ( >17) is not output.
About audio output
“Dolby D/Dolby D +/Dolby TrueHD”/
“DTS” “Bitstream”*1
*1When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Dig ital Surround 
bitstream or down-mixed 2ch PCM (e.g., TV).
“PCM”
“BD-Video Secondary Audio”“On”*2
*2When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-Video Sec ondary Audio” 
was set to “Off”.
“Off”“On”“Off”
Dolby Digital/
Dolby Digital EX Dolby DigitalOutputs using 
original audio
Down-mixed 2ch PCM
Dolby Digital Plus/Dolby TrueHD
DTS Digital Surround/
DTS-ES DTS Digital 
Surround DTS Digital 
SurroundDTS-ES
DTS-HD High Resolution Audio/ DTS-HD Master Audio
7.1ch LPCM 7.1ch PCM*3
*3[BD-V] When secondary audio or button click sound is included and the setting of the “BD-Video Secondary Audio” is set to “On”, audio  is output as 
5.1 ch.
Enjoying High Bit rate Audio of BD-Video
VQT3C15~Body1_mst.fm  30 ページ  ２０１０年１２月２４日　金曜日　午後５時３１分