Panasonic Dmp B200 Owners Manual
Have a look at the manual Panasonic Dmp B200 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
VQT3C15P PC Owner’s Manual Portable Blu-ray Disc™ Player Model No. DMP-B200 Dear customer Thank you for purc hasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this pr oduct, please read the instructions completely. Please keep this manual for future reference. If you have any questions contact U.S.A. and Puerto Rico : 1-800-211-PANA (7262) Canada : 1-800-561-5505 until 2011/1/10 DMP-B200P&PC-VQT3C15_eng.book 1 ページ 2010年12月22日 水曜日 午後6時2分
VQT3C15 2 Getting started IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The following mark and symbols are located on bottom of the unit. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “ dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it. To completely disconnect power from the unit, unplug the power cord from the AC power outlet. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥USE ONLY THE RECOMMENDED ACCESSORIES. ≥DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. CAUTION!THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ≥ Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262) THE FOLLOWING APPLIES ONLY IN CANADA. This Class B digital apparatus complies with Canadian ICES-003. (Bottom of product) DMP-B200P&PC-VQT3C15_eng.book 2 ページ 2010年12月22日 水曜日 午後6時2分
Getting started VQT3C15 3 Batteries1 Battery pack (Lithium ion battery pack)≥Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not use the player outside if it is snowing or raining. (The battery pack is not waterproof.) ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals ( i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. 2 Button-type battery (Lithium battery) ≥Insert with poles aligned. ≥ Do not touch the terminals ( i and j) with metal objects. ≥ Do not recharge, disassemble, remodel, heat or throw into fire. ≥ Keep out of reach of children. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. 3 Disposing of the batteries Check and follow your local regulations before disposal. WarningRisk of fire, explosion and burns. Do not disassemble. Do not heat the batteries above the following temperatures or incinerate. Button-type battery 100 xC (212 xF) Battery pack 60 xC (140 xF) CAUTIONDanger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. A lithium ion battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY for information on how to recycle this battery. For USA-California Only This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate . Product Identification Marking is located on the bottom of units. AC adaptorThis AC adaptor operates on AC between 110 V and 240 V. But ≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only. ≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration. ≥ When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited to the voltage of the AC supply and the rated current of the AC adaptor. ≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC cord set. WARNINGDRIVER MUST NOT OPERATE OR VIEW THIS UNIT WHILE OPERATING THE VEHICLE. Doing so will distract the driver and could cause a collision resulting in serious injury or property damage. Do not rest the unit on your lap for a long time while using it. The unit can become hot and cause burns. To prevent damage Avoid the following: ≥Spraying flammable insecticides near the unit. ≥ Pressing the LCD. ≥ Touching the lens and other parts of the laser pickup. Do not use the unit in the following places: ≥ Sandy places such as beaches. ≥ On top of cushions, sofas, or hot equipment such as amplifiers. Do not leave in an unventilated automobile or exposed to direct sunlight and high temperatures. Do not play your headphones or earphones at a high volume. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headphones or earphones are the open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you can’t hear what’s around you. Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: ≥ Start your volume control at a low setting. ≥ Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: ≥ Leave it there. ELECTRONIC INDUSTRIES ASSOCIATION EST. 1924 Listening caution DMP-B200P&PC-VQT3C15_eng.book 3 ページ 2010年12月22日 水曜日 午後6時2分
VQT3C15 4 Table of contents Getting started IMPORTANT SAFETY INSTRUCTIONS ................... 2 Accessories .............................................................. 4 Firmware updates .................................................... 5 Unit and media care ................................................. 5 Media (Disc and card) information ......................... 6 Overview ................................................................... 8 Adjusting the LCD screen angle ........................... 10 Preparing the Power Supply ................................. 10 Turning on/off the unit ........................................... 12 Showing FUNCTION MENU ................................... 12 Adjusting the pictures on the LCD screen .......... 13 Loading the disc or SD card ................................. 13 Playback Basic play (Playing video contents) ..................... 14 Enjoying picture-in-picture in BD-Video .............. 17 Playing still pictures .............................................. 18 Playing music ......................................................... 20 Using this unit with other equipment ................... 21 Linked operations with the TV (VIERA Link™ “HDAVI Control™”) ....................... 22 Settings Changing settings with the on-screen menu ...... 24 Changing the unit’s settings ................................. 26 Reference Enjoying High Bit rate Audio ................................ 30 About MP3/JPEG/MKV/AVCHD/MPEG2 files ....... 31 Indicators and screen messages ......................... 33 Troubleshooting guide .......................................... 34 Specifications ......................................................... 38 Licenses ................................................................. 39 Glossary ................................................................. 40 Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) .............. 42 Limited Warranty (ONLY FOR CANADA) ............. 43 Index ....................................................... Back Cover Accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of December 2010. These may be subject to change.) [For[U.S.A.[and[Puerto[Rico] To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 42. [For[Canada] To order accessories, call the dealer from whom you have made your purchase. ∑ 1 Remote control (N2QAJC000018) ∑ 1 Button-type battery for remote control (for replacement >9) ∑ 1 AC adaptor (RFEA219W) ∑ 1 AC power supply cord (K2CB2CB00020) ≥ For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit. ∑ 1 Car DC Adaptor (RFEC207P-AB) ∑ 1 Rechargeable battery pack (DY-DB20) [For[Canada] The enclosed Canadian French label sheet corresponds to the English display on the unit. DMP-B200P&PC-VQT3C15_eng.book 4 ページ 2010年12月22日 水曜日 午後6時2分
Getting started Reference Playback Settings VQT3C15 5 Firmware updates Occasionally, Panasonic may release firmware updates for this unit that may add or improve the way a feature operates. These updates are available free of charge. You can download the latest firmware version from the website “http://panasonic.jp/support/global/cs/” (This site is in English only.). After you burn the latest firmware to a CD-R disc, play the disc in the unit and update the firmware. Only when connecting the AC adaptor. During the firmware update “DO NOT TURN OFF OR UNPLUG THE UNIT OR OPEN THE DISC LID.” ≥ The [ Í] and [CHARGE] indicators light while updating the firmware and the indicators turn off when updating the firmware is finished. ( >8) ≥ To check the version of the firmware on this unit, refer to “System Information” ( >29) Unit and media care ≥Close the LCD screen when moving the unit. Don’t hold by the LCD screen. ≥ The unit does not have magnetic shielding. Do not place the unit near televisions, personal computers or other devices easily influenced by magnetism. Do not keep this unit and magnetized cards (bank cards, commuter passes, etc.) close together. ≥ Do not place the unit with the LCD display-side down when the screen is open. Doing so may scratch the surface of the LCD and around the LCD. ∫ Clean discs Wipe with a damp cloth and then wipe dry. ∫Disc and card handling precautions ≥Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc. ≥ Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable). ≥ Do not write on the label side with a ball-point pen or other writing instrument. ≥ Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ≥ Do not use scratch-proof protectors or covers. ≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card. ≥ Do not use the following discs: jDiscs with exposed adhesive from removed stickers or labels (rented discs etc). j Discs that are badly warped or cracked. j Irregularly shaped discs, such as heart shapes. ∫To clean this unit, wipe with a soft, dry cloth. ≥Use eyeglass cleaner to remove stubborn dirt from the LCD. ≥ Do not use a microfiber dust cloth on the LCD screen. Follow the caution when wiping the outer casing. ≥ Never use alcohol, paint thinner or benzine to clean this unit. ≥ Wiping the LCD and around the LCD with a hard cloth or rubbing them strongly may scratch the surfaces. ∫ Maintenance of the lens ≥Remove dust carefully with an air blower for camera lenses (optional). ≥ Recommended product: Lens cleaner kit (SZZP1038C) (Available from Panasonic dealers.) ≥ You cannot use a CD type lens cleaner. ≥ Be careful not to touch the lens with your fingers. The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. ( >34, “To return all settings to the factory preset”)≥The operation history may be recorded in the memory of this unit. Handling the unit Disc and card handling Maintenance To dispose or transfer this unit DO DO NOT DMP-B200P&PC-VQT3C15_eng.book 5 ページ 2010年12月22日 水曜日 午後6時2分
VQT3C15 6 Media (Disc and card) information This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on the discs and/or packaging. Note about using a DualDisc ≥The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be possible. ≥ Do not use a DualDisc in this unit as it may not be possible to insert it correctly and it may get scratched or scraped. This chart shows the different type of discs recorded with other devices that you can use. This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to the operating instructions for your equipment. Commercially sold discs Type of media and logoFeatures Indicated as BD-Video This format supports High Definition video and audio content. [BD-V] DVD-Video This format supports high quality video and audio playback. [DVD-V] CD Compact Discs (CD’s) that contain audio and music ≥ Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed. [CD] User recorded media Type of media and logoFormats Indicated as BD-RE ≥Version 3 of the BD-RE Recording Format ≥ JPEG format [BD-V] [JPEG] BD-R ≥Version 2 of the BD-R Recording Format ≥ MKV format [BD-V] [MKV] DVD-RAM ≥Version 1.1 of the DVD Video Recording Format ≥ JPEG format ≥ AVCHD format [DVD-VR] [JPEG] [AVCHD] DVD-R/RW ≥ DVD-Video Format ≥ Version 1.1 of the DVD Video Recording Format ≥ AVCHD format ≥ MKV format (DVD-RW is not supported) ≥ MP3 format (DVD-RW is not supported) ≥ JPEG format (DVD-RW is not supported) [DVD-V] [DVD-VR] [AVCHD] [MKV] [MP3] [JPEG] DVD-R DL ≥DVD-Video Format ≥ Version 1.2 of the DVD Video Recording Format ≥ AVCHD format ≥ MKV format ≥ MP3 format ≥ JPEG format [DVD-V] [DVD-VR] [AVCHD] [MKV][MP3] [JPEG] r R/ rRW/ rRDL ≥r VR ( rR/ rRW Video Recording) Format ≥ AVCHD format [DVD-V] [AVCHD] CD-R/RW ≥ CD-DA format ≥ MP3 format ≥ JPEG format ≥ MKV format [CD] [MP3] [JPEG] [MKV] ≥ It may not be possible to play the above discs in some cases due to the type of discs, the condition of the recording, the recording method and how the files were created. ≥ When a disc recorded in the AVCHD format is being played, the video may be paused for a few seconds at portions spliced, due to deletion or editing. DMP-B200P&PC-VQT3C15_eng.book 6 ページ 2010年12月22日 水曜日 午後6時2分
Getting started VQT3C15 7 BD-Video This unit plays BD-Video marked with labels containing the region code “A”. Example: DVD-Video This unit plays DVD-Video marked with labels containing the region number “1” or “ALL” . Example: ≥ 2.6 GB and 5.2 GB DVD-RAM ≥ DVD-RAM that cannot be removed from cartridge ≥ 3.95 GB and 4.7 GB DVD-R (Authoring) ≥ DVD-R, DVD-R DL, DVD-RW, +R, +R DL recorded on another unit and not finalized ≥ BD-Video with a region code other than “A” ≥ DVD-Video with a region number other than “1” or “ALL” ≥ Version 1.0 DVD-RW ≥ DVD-ROM, CD-ROM, CDV, CD- G, CVD, SACD, Photo CD, MV-Disc and PD ≥ DVD-Audio ≥ Video CD and SVCD ≥ WMA discs ≥ PAL discs ≥ DivX discs ≥ HD DVD ≥ BD-Video discs recorded at a rate of 50 fields/sec ≥ Any other disc that is not specifically supported This chart shows the different type of cards recorded with other devices that you can use. * Includes miniSD Card, microSD Card, microSDHC Card and microSDXC Card The card types mentioned above will be referred to as “SD card” in these operating instructions. ≥miniSD Card, microSD Card, microSDHC Card and microSDXC Card can be used, but must be used with an adaptor card. These are usually supplied with such card, or otherwise customer provided. ≥ We recommend using a Panasonic SD card. Please confirm the latest information on the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.) ≥ This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and FAT16 formats, as well as SDHC Memory Cards in FAT32 format (Does not support long file name.) and SDXC Memory Cards in exFAT. ≥ If the SD card is used with incompatible computers or devices, recorded contents may be erased due to the card being formatted etc. ≥ When using cards from 4 GB to 32 GB, only SD cards using the SDHC logo can be used. ≥ When using cards 48 GB and 64 GB, only SD cards using the SDXC logo can be used. ≥ Useable memory may be slightly less than the card capacity. ≥ If the SD card you are attempting to use was formatted on a PC, it is possible that the card may not work properly. ≥ Keep the Memory Card out of reach of children to prevent swallowing. ≥ When a card recorded in the AVCHD format is being played, the video may momentarily pause, especially where one recording ends and the next one begins. This is normal and does not indicate a problem. ≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”. Region management information Discs that cannot be played in this unit 2 4 1ALL1 SD cards Type of media*FormatsIndicated as SD Memory Card (from 8 MB to 2 GB) SDHC Memory Card (from 4 GB to 32 GB) SDXC Memory Card (48 GB, 64 GB) ≥ JPEG format ≥ AVCHD format ≥ MPEG-2 format [JPEG] [AVCHD] [MPEG2] ADAPTER DMP-B200P&PC-VQT3C15_eng.book 7 ページ 2010年12月22日 水曜日 午後6時2分
VQT3C15 8 Overview Instructions for operations are generally described using the remote control in these operating instructions. Front View Rear View1 LCD screen 2 Speaker 3 Disc lid 4 Open the disc lid 5 Turn the unit on and off ( >12) 6[ Í] indicator (> 10) When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. 7 [CHARGE] indicator ( >11) While recharging the battery pack, this indicator lights up. 8 Remote control signal sensor ( >9) 9 Change the screen settings ( >13) 10 Adjust the volume ( >14) 11 Show the sub menu 12 Selection/OK 13 Headphone terminal [ Ë] (‡ 3.5 mm stereo mini jack) 14 Switch the media to playback It will switch every time it is pressed. 15 Playback ( >14) 16 Stop ( >15) 17 Skip title numbers, etc. ( >15) 18 Return to previous screen 19 DC IN terminal (> 10) 20 HDMI AV OUT terminal ( >21) 21 SD card slot ( >13) 22 Exhaust opening 23 Battery pack (supplied) The Unit 1 2 8 3 4 5 7 69 10 11 12 13 1415161718 DISC/SD RETURN 20 21 23 19 22 ≥ To select: Press up, down, left, or right ([ 3,4,2 ,1]) ≥ To enter: Press [OK] About the exhaust opening: Do not block the exhaust opening on the side, or use in a place that will block the exhaust opening. The heat will build up internally, and may cause a fire or deformation of the outer casing. DISCSD DMP-B200P&PC-VQT3C15_eng.book 8 ページ 2010年12月22日 水曜日 午後6時2分
Getting started VQT3C15 9 1 Turn the unit on and off (>12) 2 Switch the media to playback ( >14) 3 Basic operations for playback ( >14–15) 4 Use according to the instructions on the screen 5 Show Top menu/Direct Navigator ( >14) 6 Selection/OK, Frame-by-frame 7 Show the sub menu 8 Select title numbers, etc./Enter numbers 9 Cancel the values that were entered 10 Mute the sound Press again to clear 11 Adjust the volume ( >14) 12 Exit the menu screen 13 Show FUNCTION MENU (> 12) 14 Show Pop-up menu ( >14) 15 Select audio ( >16) 16 Return to previous screen 17 Show on-screen menu ( >24) 18 Show status messages ( >16) 19 Turn the unit off automatically ( >12) 20 Change the screen settings ( >13) 21 Change the setup of this unit ( >26) ∫ Insert the button-type battery (supplied) 1 Pull out the holder. 2 Insert the battery and return the holder. ≥ Keep the button-type battery out of reach of children to prevent swallowing. ∫ Range of use The distance and angles are approximate. Remote control 0ó0è0ã0ú 0÷0ð0í 0Ó 0Ô0Ò 0Õ 0Ö 0× 0Ø0Ù 0Ñ 0Ú 1 3 6 7 5 4 8 9 2 1712 19 21 20 11 10 13 14 15 16 18 ≥ To select: Press up, down, left, or right ([ 3,4 ,2, 1]) ≥ To enter: Press [OK] ≥ Frame forward / Frame backward: (While paused) press left or right ([ 2;][;1 ]) Bottom Pull out while pressing here _ facing up Lithium battery: CR2025 Remote control signal sensor Within 30 degrees angle either left or right Within 20 degrees angle either up or down Remote control transmitter Within 7 m (23 ft.) in front DMP-B200P&PC-VQT3C15_eng.book 9 ページ 2010年12月22日 水曜日 午後6時2分
VQT3C15 10 Adjusting the LCD screen angle AOpen the screen. B Standard C Free D Compact About the LCD screen There may be 0.01 % or less chanc e of missing or constantly turned on pixels, but this is not a malfunction. Preparing the Power Supply The unit is in the standby condition (the [ Í] indicator lights) when the AC power supply cord is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. To conserve power This unit consumes 0.3 W ( [For[U.S.A.]) or 0.4 W ( [For[Canada] ) (Approximately 4 W ( [For[U.S.A.]) or 4.5 W ( [For[Canada] ) when Quick Start is set to “On”) of power even when turned off. When the unit is not going to be used for a long time, disconnect the AC power supply cord from the household AC outlet. This unit can be used in places without an AC outlet, such as outdoors, by attaching the supplied battery pack. ≥ The battery is not charged at the time of purchase. Charge before initial use. ≥ The battery is designed only for us e with this unit. It cannot be used with other equipment. ∫ Attaching the battery pack Turn the unit off before attaching or detaching the battery pack. 1 Bring in from the left, aligning the grooves. 2 Slide all the way to the right until you hear a click. Check to make sure it is securely fastened. Using the unit connected to the AC adaptor Using the battery pack AC adaptor (supplied) To a household AC outlet AC power supply cord (supplied) 1 2 3 RELEASE DETACH ATTACH RELEASEDETACH ATTACH Bottom side of this unit Battery pack(supplied) DMP-B200P&PC-VQT3C15_eng.book 10 ページ 2010年12月22日 水曜日 午後6時2分